LPF Donation via Stripe | LPF Donation - Other Methods
Links below open in new window
ArcticMyst Security by Avery
GB: 2$ copper modules ALL SIZES CLOSED
- Thread starter AnthoT
- Start date
rhd
0
- Joined
- Dec 7, 2010
- Messages
- 8,475
- Points
- 0
Re: GB: 2$ copper modules ALL SIZES
From my own experience, I would suggest that you want the the diode pocket diameter to be:
NO MORE than 0.10mm smaller
NO LESS than 0.05mm smaller
So a good target diameter for 5.6mm modules might be 5.52mm, but it's important that your machinist actually know what these tolerances are.
For example, a 5.45mm diameter will be really tough to press into, and a 5.6mm diameter may actually be loose.
From my own experience, I would suggest that you want the the diode pocket diameter to be:
NO MORE than 0.10mm smaller
NO LESS than 0.05mm smaller
So a good target diameter for 5.6mm modules might be 5.52mm, but it's important that your machinist actually know what these tolerances are.
For example, a 5.45mm diameter will be really tough to press into, and a 5.6mm diameter may actually be loose.
- Joined
- Jan 1, 2012
- Messages
- 462
- Points
- 18
Re: GB: 2$ copper modules ALL SIZES
Im in for 30 copper 5.6 modules. Is there any other price breaks? This has a lot of interest in such a short amount of time. Ask the cnc company about orders of 500+. I may even be in for more.
Im in for 30 copper 5.6 modules. Is there any other price breaks? This has a lot of interest in such a short amount of time. Ask the cnc company about orders of 500+. I may even be in for more.
Last edited:
eytyxhs
0
- Joined
- Nov 3, 2010
- Messages
- 2,069
- Points
- 0
Re: GB: 2$ copper modules ALL SIZES
Put me for:
5x 5.6mm
1x 3.8mm
2x 9mm
All copper (polished?)
Put me for:
5x 5.6mm
1x 3.8mm
2x 9mm
All copper (polished?)
Last edited:
- Joined
- Jan 1, 2012
- Messages
- 462
- Points
- 18
Re: GB: 2$ copper modules ALL SIZES
Actually, add a 2 each of 9mm and 3.8mm ones to my order too.
So thats:
30x 5.6
2x 9mm
2x 3.8mm
all copper.
I assume thats what everybody will want.
Thanks.
Actually, add a 2 each of 9mm and 3.8mm ones to my order too.
So thats:
30x 5.6
2x 9mm
2x 3.8mm
all copper.
I assume thats what everybody will want.
Thanks.
grainde
0
- Joined
- Jan 29, 2012
- Messages
- 3,164
- Points
- 113
Re: GB: 2$ copper modules ALL SIZES
Hi Id like:
5 x 5.6 mm
2 x 3.8 mm
2 x 9 mm
All Cu and polished
:beer:
Hi Id like:
5 x 5.6 mm
2 x 3.8 mm
2 x 9 mm
All Cu and polished
:beer:
- Joined
- Jan 1, 2012
- Messages
- 462
- Points
- 18
Re: GB: 2$ copper modules ALL SIZES
I got bored, and felt like being proactive,
I made a google doc spreadsheet with all the formulas and stuff. Everybody just add the info of what you want.
AnthoT, you are free to use this link as you please, its for your organization :beer:
https://docs.google.com/spreadsheet/ccc?key=0AuZqxn-6rsqudDJSX0lpMmZnN1hCbXhTSVdPcmJ0SEE
Amazing! We almost filled up almost 350 orders in such a short amount of time! I think we should let this go for a day or two so everybody gets a good chance to see. And maybe an even better price break for 700 orders? :eg:
I got bored, and felt like being proactive,
I made a google doc spreadsheet with all the formulas and stuff. Everybody just add the info of what you want.
AnthoT, you are free to use this link as you please, its for your organization :beer:
https://docs.google.com/spreadsheet/ccc?key=0AuZqxn-6rsqudDJSX0lpMmZnN1hCbXhTSVdPcmJ0SEE
Amazing! We almost filled up almost 350 orders in such a short amount of time! I think we should let this go for a day or two so everybody gets a good chance to see. And maybe an even better price break for 700 orders? :eg:
Last edited:
Re: GB: 2$ copper modules ALL SIZES
I measured some azix and found that they are smaller than 5.6, then I used my lathe and made a test stick that exactly fits the azix, and
I use this to check the pressfit for the 5.6mm diode.
I make it with a 5.5 milling drill, and just press sideways a little at the end to get 5.53 something(dont remeber exactly), and it works fine.
It's a nice price for the modules, and I think I might buy in the future
I measured some azix and found that they are smaller than 5.6, then I used my lathe and made a test stick that exactly fits the azix, and
I use this to check the pressfit for the 5.6mm diode.
I make it with a 5.5 milling drill, and just press sideways a little at the end to get 5.53 something(dont remeber exactly), and it works fine.
It's a nice price for the modules, and I think I might buy in the future
Last edited:
- Joined
- Jan 1, 2012
- Messages
- 462
- Points
- 18
- Joined
- Dec 28, 2010
- Messages
- 280
- Points
- 0
Re: GB: 2$ copper modules ALL SIZES
AnthoT, looks like you really struck a chord here, >300 units in a day :gj:
We may be able to get even better bulk discounts!
AnthoT, looks like you really struck a chord here, >300 units in a day :gj:
We may be able to get even better bulk discounts!
Blord
0
- Joined
- Dec 24, 2007
- Messages
- 5,356
- Points
- 0
Re: GB: 2$ copper modules ALL SIZES
Put me in for :
5x 5.6mm
2x 9mm
2x 3.8mm
All copper !
Put me in for :
5x 5.6mm
2x 9mm
2x 3.8mm
All copper !
Last edited:
jimdt7
0
- Joined
- Feb 5, 2011
- Messages
- 1,893
- Points
- 48
Re: GB: 2$ copper modules ALL SIZES
Put me in for 5x 5.6mm
Copper and polished also
Jim
Put me in for 5x 5.6mm
Copper and polished also
Jim
AnthoT
0
- Joined
- Jan 14, 2012
- Messages
- 2,133
- Points
- 48
Re: GB: 2$ copper modules ALL SIZES
Ok based on the manufacturer the tolerances are 0.02+/-mm. So I think it's decent and for every diameter I made the press fit 0.07mm tighter then it has to be so that way it's tight every time.
If anyone has any other questions or concerns before I place the order just let me know by tonight I can still make changes
if we can get to 700 the pricing would be the same because its below 350 the price is higher
Ill be adding everyone to the list shortly
Past 1000 is 1.50$ copper and 1.00 Aluminum
I guess at this point since its Friday I'll wait till Monday to place the order since that's the next business day so i can make changes up until Sunday night.
Pricing will only get better past 1000
Shipping depends on your location. Anywhere in Canada it's 7$ (tracked, insured)
Anywhere in the US i prefer using tracked and insured shipping (13$) if not then (5$)
Anywhere else in the world contact me for a quote
EDIT: everyone added to the list
Ok based on the manufacturer the tolerances are 0.02+/-mm. So I think it's decent and for every diameter I made the press fit 0.07mm tighter then it has to be so that way it's tight every time.
If anyone has any other questions or concerns before I place the order just let me know by tonight I can still make changes
if we can get to 700 the pricing would be the same because its below 350 the price is higher
Ill be adding everyone to the list shortly
Past 1000 is 1.50$ copper and 1.00 Aluminum
I guess at this point since its Friday I'll wait till Monday to place the order since that's the next business day so i can make changes up until Sunday night.
Pricing will only get better past 1000
Shipping depends on your location. Anywhere in Canada it's 7$ (tracked, insured)
Anywhere in the US i prefer using tracked and insured shipping (13$) if not then (5$)
Anywhere else in the world contact me for a quote
EDIT: everyone added to the list
Last edited:
Blord
0
- Joined
- Dec 24, 2007
- Messages
- 5,356
- Points
- 0
Re: GB: 2$ copper modules ALL SIZES
Is the back of the module threaded for the back part ? I don't need that btw.
Is the back of the module threaded for the back part ? I don't need that btw.
AnthoT
0
- Joined
- Jan 14, 2012
- Messages
- 2,133
- Points
- 48
Re: GB: 2$ copper modules ALL SIZES
I can get it threaded if you'd like. I've gotten other requests about this so I'll do that but only the front part will still be included you'll need your own back
I can get it threaded if you'd like. I've gotten other requests about this so I'll do that but only the front part will still be included you'll need your own back
- Joined
- Sep 20, 2008
- Messages
- 17,622
- Points
- 113
Re: GB: 2$ copper modules ALL SIZES
I just sent you a PM with my GB order...
I believe you now have enough to place an order on Monday
Thanks for doing this GB...:beer:
Jerry
(40-10-20-15-7 92)
I just sent you a PM with my GB order...
I believe you now have enough to place an order on Monday
Thanks for doing this GB...:beer:
Jerry
(40-10-20-15-7 92)
Last edited:
