Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

What's the third diode on this sled?

VW

0
Joined
Mar 1, 2008
Messages
577
Points
0
So I just ripped open my broken LG burner for the diodes an motors and at the time was fully aware that an IR diode would be in there.  But for some reason, there's three diodes attached to this sled, is the third simply another IR diode?
 





VW

0
Joined
Mar 1, 2008
Messages
577
Points
0
Sorry this is the best I can do, this camera doesn't have very good focus up close...
 

Attachments

  • P7050740.JPG
    P7050740.JPG
    145.5 KB · Views: 104

VW

0
Joined
Mar 1, 2008
Messages
577
Points
0
You can make them out though...
 

Attachments

  • P7050742.JPG
    P7050742.JPG
    144.8 KB · Views: 100
Joined
Jun 13, 2007
Messages
5,410
Points
113
I'm only seeing two laser diodes in that last picture, could you draw circles around what you think are laser diodes in paint?
 

VW

0
Joined
Mar 1, 2008
Messages
577
Points
0
So the laser lens it's self isn't a diode? I see, I always assumed the one on top was a diode also, hadn't got around to extracting my 803T, that's good to know.

*phew*

Been holding back untill I had everything I need, glad to know I don't have to be as careful with the sled any more...

So what can I expect out of this diode? It's a 16x, I started getting meduim not present errors, so have no idea on the condition of the diode. Bought a new burner anyway so thought I'd rip this one open for the diodes and motors. Saves me buying some things I need...
 
Joined
Jul 27, 2007
Messages
3,642
Points
63
the lens just focuses the beam onto the disc, no diode there

a 16x should give you decent output (150mW ish?)
 

VW

0
Joined
Mar 1, 2008
Messages
577
Points
0
I see, sounds good. Here's hoping the problems were firmware related and not diode related...

:p
 

Zom-B

0
Joined
Mar 25, 2008
Messages
895
Points
28
Often the problem of a refusing drive is a lens problem. Sorry dude but cleaning the lens might have fixed your drive. As for the diode, drive them at 300mA max. The one in the shortest heat sink is the red one.
 




Top