Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

Red Dorcy Jr Build

Joined
Sep 4, 2009
Messages
581
Points
0
Hey,

I'm building myself a red dorcy jr build.

I have:

- LPC-815 in Aixiz Module
- Flexdrive set to 390mA
- DarkHorse Black Full Body Heatsink
- Dorcy Jr Host (old style)
- Batteries
- Charger

This host was previously used for a GGW, so wiring etc is different with a red.. and I'm a bit lost.

In this build, I really want to know what goes to what... here are my few questions.

- I know how to connect the flexdrive to the diode, that's all good.

- How do I connect the flexdrive to the battery and host?
 
Last edited:





Joined
May 31, 2009
Messages
3,239
Points
63
Hey tommii89,

It's pretty simple... Luckily I still have my Dorcy Jr.

First thing you need to do is remove the retaining ring carefully like so...

IMAG0781.jpg


It should now look like this....

IMAG0782.jpg


CAREFULLY remove the pill and it should now look like this.... Note the position of where I have soldered the positive and negative terminals....

IMAG0783.jpg


Here is a picture of the underside of the pill... The positive wire gets soldered into the positive contact point here...

IMAG0784.jpg


Then place the cap retainer back on and it should look like this....

IMAG0780.jpg


Then just solder the contact points to the input on the flexdrive.

-Adrian
 
Last edited:
Joined
Sep 4, 2009
Messages
581
Points
0
Thats perfect... Adrian! Please tell me this is for a RED build?

Your a champ. I'll hopefully get my dummy driver tomorrow and i can then build by red :)

Thanks!
 
Joined
May 31, 2009
Messages
3,239
Points
63
Reds are case negative... so yes this is setup for a red build. Put the positive in first to the end cap's spring is touching the negative terminal on the battery.
 




Top