Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

Pro Tips w/ Spyderz: Building Your First DIY Laser






Joined
Oct 6, 2008
Messages
7
Points
0
Re: Pro Tips w/ Spyderz: Building Your First DIY L

Excellent thread Spyderz.

Thanks from a new forum member!
 
Joined
Nov 10, 2008
Messages
3
Points
0
Re: Pro Tips w/ Spyderz: Building Your First DIY L

when i was gonna buy a module it ask me if i wanted a 3 or 5VDC. which one should i get?(im new at this)
 
Joined
Nov 24, 2007
Messages
2,735
Points
0
Re: Pro Tips w/ Spyderz: Building Your First DIY L

Ninja_Long_Time said:
when i was gonna buy a module it ask me if i wanted a 3 or 5VDC. which one should i get?(im new at this)
What kind of module? You mean an AixiZ module?
In this case, it doesn't matter, because you will be pulling out the diode anyway.
 

daguin

0
Joined
Mar 29, 2008
Messages
15,989
Points
113
Re: Pro Tips w/ Spyderz: Building Your First DIY L

Ninja_Long_Time said:
when i was gonna buy a module it ask me if i wanted a 3 or 5VDC. which one should i get?(im new at this)

You just want the empty module.

Peace,
dave
 
Joined
Dec 11, 2008
Messages
16
Points
0
Re: Pro Tips w/ Spyderz: Building Your First DIY L

its going to take me a while to go through all this. great stuff
 
Joined
Nov 24, 2007
Messages
2,735
Points
0
Re: Pro Tips w/ Spyderz: Building Your First DIY L

AttenuationWhore said:
its going to take me a while to go through all this. great stuff
Attention Whoring is not for everyone ;) ;D :p
 
Joined
Nov 24, 2007
Messages
2,735
Points
0
Re: Pro Tips w/ Spyderz: Building Your First DIY L

Added some new content at the very bottom ;)
People were having trouble extracting diodes...
 

dav

0
Joined
Dec 3, 2008
Messages
84
Points
0
Re: Pro Tips w/ Spyderz: Building Your First DIY L

great guide Spyderz20x6 .
very helpfull.

is there any links on how to make your own heatsinks?
 
Joined
Nov 24, 2007
Messages
2,735
Points
0
Re: Pro Tips w/ Spyderz: Building Your First DIY L

dav said:
great guide Spyderz20x6 .
very helpfull.

is there any links on how to make your own heatsinks?
Well, you will need a lathe, and some metal blanks...
From there, it is pretty straightforward :p
 

dav

0
Joined
Dec 3, 2008
Messages
84
Points
0
Re: Pro Tips w/ Spyderz: Building Your First DIY L

a wood lathe?
how can you turn a piece of metal on a wood lathe?
could you make a vidio?
 
Joined
Dec 20, 2007
Messages
31
Points
0
Re: Pro Tips w/ Spyderz: Building Your First DIY L

tnx a lot on this.....it will be useful to many generations lool
 
Joined
Dec 23, 2008
Messages
1
Points
0
Re: Pro Tips w/ Spyderz: Building Your First DIY L

In general around how much would it cost to make it?
 




Top