Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

Pot modding FAQ's

chipdouglas

chipdouglas

0
Joined
Dec 23, 2008
Messages
3,948
Points
63
it's not just the diodes.... who knows what the max current of the driver is too.? it's best to just play with it on an lpm. Alot of it could also be a placebo effect to. with out an LPM you really have no way AT ALL to know if you turned your 5mw green into a 10 or 15. But if a person thinks they turned it up then more power to them (pun intended)

Please note, i say an lpm is the only way... I say this because most noob pot modders won't have a clue how to check current.

michael.
 





Helios

Helios

0
Joined
Jan 7, 2011
Messages
1,341
Points
48
chipdouglas said:
it's not just the diodes.... who knows what the max current of the driver is too.? it's best to just play with it on an lpm. Alot of it could also be a placebo effect to. with out an LPM you really have no way AT ALL to know if you turned your 5mw green into a 10 or 15. But if a person thinks they turned it up then more power to them (pun intended)

Please note, i say an lpm is the only way... I say this because most noob pot modders won't have a clue how to check current.

michael.
Click to expand...

I am suggesting testing and comparing driver current and LPM readings. I am surprised no one has done this yet with how cheap these are. It would be cool to have some data on what current provides the best performance on average using several units to gather the data and make it representative of the general 5mW newwish pool. Then at least its not pot modding instead it would be current optimizing.
 
Pontiacg5

Pontiacg5

0
Joined
Dec 23, 2007
Messages
2,494
Points
0
Helios said:
I am suggesting testing and comparing driver current and LPM readings. I am surprised no one has done this yet with how cheap these are. It would be cool to have some data on what current provides the best performance on average using several units to gather the data and make it representative of the general 5mW newwish pool. Then at least its not pot modding instead it would be current optimizing.
Click to expand...

In some cases it is not the diode but the crystals that set the limit of a pot mod. If you pump a cheap crystal set too hard it can burn up. Mode hopping would also be an issue.

The point I am trying to make is that it is not really possible to set a limit with cheap greens like it is with regular diodes.
 
Helios

Helios

0
Joined
Jan 7, 2011
Messages
1,341
Points
48
Pontiacg5 said:
In some cases it is not the diode but the crystals that set the limit of a pot mod. If you pump a cheap crystal set too hard it can burn up. Mode hopping would also be an issue.

The point I am trying to make is that it is not really possible to set a limit with cheap greens like it is with regular diodes.
Click to expand...

Its more difficult and less accurate than diodes definitely but I dont think we can say at this point that its not possible to find a good current for improved average performance. Unless there is some testing and data on this that I have not seen. I do know what you are saying though and yes it is a much more complex system to work with than a diode.
 
jcswimmer305

jcswimmer305

0
Joined
Sep 29, 2011
Messages
52
Points
0
Well if diode life is the problem...can't you just replace the cheap diode with a better one, like a blu ray diode (or at least one that can handle the higher power)? Is this even compatible?
 
Last edited:
Tanman54

Tanman54

0
Joined
Dec 4, 2011
Messages
21
Points
0
I have a tutorial i just put up that hopefully people wanting to pot mod will see. You can turn a 5mW green laser into a IR burning laser without adding anything new just removing 1 thing from a laser.
 
lasersbee

lasersbee

0
Joined
Sep 20, 2008
Messages
17,622
Points
113
Tanman54 said:
I have a tutorial i just put up that hopefully people wanting to pot mod will see. You can turn a 5mW green laser into a IR burning laser without adding anything new just removing 1 thing from a laser.
Click to expand...
That is not Pot Modding...
That is removing the DPSS crystals from a 532nm Laser...:)

Jerry
 
JaiNobeZ

JaiNobeZ

0
Joined
Jan 21, 2010
Messages
935
Points
0
It's not safe, by any means. You'll just wreck your eyes instead of your laser.
 
JaiNobeZ

JaiNobeZ

0
Joined
Jan 21, 2010
Messages
935
Points
0
Well, you need to make that very explicitly clear before posting the tutorial. I've played with IR once and I had a big DIY radiation shield made of cardboard with a small window with my mobile phone celotaped to it so I could see the dot on the screen using the camera.

The other issue is about focus. The lens is set at an appropriate distance for focussing green light at infinity. Infrared will focus differently, and therefore your new laser will have pretty terrible divergence. I don't know... if you've done it already, you probably know better than I do, I just think since IR lasers aren't that much more expensive than green you may as well buy an IR one.
 
offroadfreak8582

offroadfreak8582

0
Joined
Oct 14, 2011
Messages
2,369
Points
83
Lol i can allready imagine it but it certainly is a good idea if you have no glasses :wave:

greatings,,

JaiNobeZ said:
I've played with IR once and I had a big DIY radiation shield made of cardboard with a small window with my mobile phone celotaped to it so I could see the dot on the screen using the camera.
Click to expand...
 
LaZeRz

LaZeRz

0
Joined
Feb 19, 2011
Messages
2,549
Points
63
Something to add to the list:

If I add ANOTHER pot to my laser would I be able to get DOUBLE the power!?!?!
 
JaiNobeZ

JaiNobeZ

0
Joined
Jan 21, 2010
Messages
935
Points
0
offroadfreak8582 said:
Lol i can allready imagine it but it certainly is a good idea if you have no glasses :wave:

greatings,,
Click to expand...

It worked pretty well. I didn't ever end up managing to burn anything though.

LaZeRz said:
Something to add to the list:

If I add ANOTHER pot to my laser would I be able to get DOUBLE the power!?!?!
Click to expand...

How about adding an eighth of (a) pot? That'll certainly make it seem brighter.
 
You must log in or register to reply here.





Top