Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

need help o add laser to my 3d printer






Joined
Mar 5, 2012
Messages
942
Points
28
There is a "pot" that can be turned to change current. I'm pretty sure voltage will stay at 12V regardless of current.

Look just to the left of R2 , the first component on the left is the pot. I would suggest using a multimeter/ammeter to check the current while turning the pot. Can't determine output current safely otherwise...

Hope this helps
 
Joined
Jan 12, 2015
Messages
16
Points
0
usually the adjustment is a phillips screw IIRC, could be wrong, only seen them in videos.
 




Top