bobhaha
0
- Joined
- May 31, 2009
- Messages
- 3,239
- Points
- 63
Btw use the
LPF Donation via Stripe | LPF Donation - Other Methods
Links below open in new window
ArcticMyst Security by Avery
DIY: How to build a Burning Violet Laser
- Thread starter styropyro
- Start date
- Joined
- Jun 13, 2007
- Messages
- 5,410
- Points
- 113
I'll go fix that too, before the changeover the tags worked with the whole URL, but now they don't...
YAG
0
- Joined
- Mar 20, 2010
- Messages
- 27
- Points
- 0
That is a spectacularly awesome tutorial! Thanks!
Do you use an ESD wrist strap? Where are you supposed to clip the ground if one is used?
Also, I'm worried about overheating the diode with my soldering iron. I have a Hakko 936, I have overheated so many components in the past that it's not even funny.
So, first the diode pins and board are tinned, they are touched together, then you apply the iron until the solder flows. What if it takes longer than a second for the solder to flow? That could mean I need a new tip for my iron... I'll get one. But it could also be my lack of skill... I can't find any skill on eBay for under 5 bucks though.
Do you use an ESD wrist strap? Where are you supposed to clip the ground if one is used?
Also, I'm worried about overheating the diode with my soldering iron. I have a Hakko 936, I have overheated so many components in the past that it's not even funny.
So, first the diode pins and board are tinned, they are touched together, then you apply the iron until the solder flows. What if it takes longer than a second for the solder to flow? That could mean I need a new tip for my iron... I'll get one. But it could also be my lack of skill... I can't find any skill on eBay for under 5 bucks though.
Last edited:
