Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

Disassemble Wicked Lasers E2 host

NO4H99

NO4H99

0
Joined
Sep 9, 2013
Messages
552
Points
0
So the other day I bought a defective WL e2 of ebay. Surprisingly it worked, but with a very low output. I was planning on taking it apart and building my own laser into it. Problem is, I can't figure out how to take it apart.

It looks like I might just be able to pull the battery tube off the module area, but I'm not sure on that. Has anybody disassembled this host before?

Thank you in advance :)
 





SKeeZ

SKeeZ

0
Joined
Sep 2, 2013
Messages
463
Points
28
I can tell you in advance, it will not be easy.

EDIT: i stand corrected. though it may be difficult to re-install a new module w/ spring and button in the same place.
 
Last edited:
RA_pierce

RA_pierce

0
Joined
Sep 16, 2007
Messages
3,658
Points
113
Double post. Forgive me.

This weekend I'll be posting a tutorial on how to put together a nice high power module for this host.

Here is a short video explaining how to disassemble it:
 
Last edited:
A

aggie113

0
Joined
Aug 11, 2017
Messages
8
Points
3
Forgive the zombie thread, I borked my E2 but good by leaving some batteries in and causing some corrosion. Looking to take everything apart to try to salvage things. It's already broken, so no problem in just digging right in! The video link is dead so if someone knows the secrets to taking it apart I'd be grateful.
 
RA_pierce

RA_pierce

0
Joined
Sep 16, 2007
Messages
3,658
Points
113
aggie113 said:
Forgive the zombie thread, I borked my E2 but good by leaving some batteries in and causing some corrosion. Looking to take everything apart to try to salvage things. It's already broken, so no problem in just digging right in! The video link is dead so if someone knows the secrets to taking it apart I'd be grateful.
Click to expand...

The video link should work now.
 
  • Like
Reactions: GSS
A

aggie113

0
Joined
Aug 11, 2017
Messages
8
Points
3
No such luck with my E2.
iHpBZAV.jpg

Anyone know how else it might come apart? I fear it's beyond saving at this point with the shock forces I've put on it.
If I can't do it myself does anyone know of a shop that could repair it?
 
Last edited:
BobMc

BobMc

0
Joined
Apr 23, 2016
Messages
3,685
Points
113
I have taken apart maybe 25 Nano's. Don't know if it works the same with E2's but a take a rod and "pop" them from the bottom and everything pops out the top. Hope it helps. :thinking:
 
Last edited:
A

aggie113

0
Joined
Aug 11, 2017
Messages
8
Points
3
Tried this as well, even tried warming things up with a heat gun. No joy, not even any movement from the front side when trying.
 
E

Encap

0
Joined
May 14, 2011
Messages
6,123
Points
113
RA_pierce

RA_pierce

0
Joined
Sep 16, 2007
Messages
3,658
Points
113
aggie113 said:
Yes, the link on the page is now working. However, it appears my E2's construction differs from that shown. So no luck on my part getting mine apart.
Click to expand...

One of my favorite methods for extracting modules is to remove any optics from the aperture then use scrap parts with the same threads to attach to the module, giving me some material to grab onto and pull the module out.
Laser modules often share similar threads with some others (same manufacturers, design rip-offs, who knows) so once the optics are removed, I'll find some brass tube from a different module that matches the internal or external threads of the module in the host, screw that in, then grip it with a vice and pull.

This also works with the Aixiz-style modules. A brass lens housing will allow you to connect two diode modules face-to-face, so to speak. I use this for removing modules I press into Leadlight hosts in case adjustments are necessary. It works every time.

Hopefully this helps. If words aren't clear enough, I can make a quick sketch or something later.
 
Last edited:
A

aggie113

0
Joined
Aug 11, 2017
Messages
8
Points
3
RA_pierce said:
One of my favorite methods for extracting modules is to remove any optics from the aperture then use scrap parts with the same threads to attach to the module, giving me some material to grab onto and pull the module out.
Laser modules often share similar threads with some others (same manufacturers, design rip-offs, who knows) so once the optics are removed, I'll find some brass tube from a different module that matches the internal or external threads of the module in the host, screw that in, then grip it with a vice and pull.

This also works with the Aixiz-style modules. A brass lens housing will allow you to connect two diode modules face-to-face, so to speak. I use this for removing modules I press into Leadlight hosts in case adjustments are necessary. It works every time.

Hopefully this helps. If words aren't clear enough, I can make a quick sketch or something later.
Click to expand...

I don't see how to get around the optics. I tried getting a very small drive head in between the body and the optics but it wouldn't move, even after I tried warming it up with the heat gun. So not sure how to proceed. Also, don't have any spare parts as my only lasers are this and an old Arctic :)
 
E

Encap

0
Joined
May 14, 2011
Messages
6,123
Points
113
aggie113 said:
I don't see how to get around the optics. I tried getting a very small drive head in between the body and the optics but it wouldn't move, even after I tried warming it up with the heat gun. So not sure how to proceed. Also, don't have any spare parts as my only lasers are this and an old Arctic :)
Click to expand...

Where is the cap that screws on the end of your E2?
Looks like you are missing the piece RA uses to leverage out the module in the video.
 
Last edited:
A

aggie113

0
Joined
Aug 11, 2017
Messages
8
Points
3
Encap said:
Where is the cap that screws on the end of your E2?
Looks like you are missing the piece RA uses to leverage out the module in the video.
Click to expand...

Well the cap that screws on is screwed off. The part that he uses to leverage the module out is not present on mine. Welcome to the point :) My E2 appears to be different than the one in the video...
 
You must log in or register to reply here.




Top