Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

Pictures of decanned 445nm diode.

Blord

0
Joined
Dec 24, 2007
Messages
5,356
Points
0
My 445nm diode has died. Time for a vivisection of this diode. I use a dremel for this. I know there is a special decan-tool but I don't have it.
It looks very coarse but the diode survived. :D
Pictures taken with a Canon 7D with a EF 100mm macro lens.

445nm-1.jpg


445nm-2.jpg


445nm-3.jpg


445nm-4.jpg


445nm-5.jpg


445nm-6.jpg


The pictures below are taken with the EF 100mm macro lens with a reversed EF 50mm lens in front. This will give me a magnification beyond 1:1.
445nm-7.jpg


Can anyone show the emitter ?
445nm-8.jpg
 
Last edited:





ARG

0
Joined
Feb 27, 2011
Messages
6,772
Points
113
Wow! You must have a very steady hand, if that was me I would have cut the whole top of the diode off :crackup:
 

daguin

0
Joined
Mar 29, 2008
Messages
15,989
Points
113
Nicely done!

I've seen several of these through a loop, but my photography skillz are lacking

Being "old skool" I am amazed at the level of precision at such a small scale

Peace,
dave
 

JLSE

1
Joined
Dec 13, 2007
Messages
3,580
Points
0
Can anyone show the emitter ?


Took this after a FAC experiment with a 445.
Dont have any of the bare emitter though.

svyB3cHlxwOqCa7nGd7PRaDV1.jpg




Being "old skool" I am amazed at the level of precision at such a small scale

Peace,
dave

And if there werent machines that could perform these tasks
there would be a surge in straight jacket sales :undecided:
 
Joined
May 4, 2009
Messages
5,443
Points
113
Here is one that was lasing just fine when it went south, me thinks the current may have been on the high side :crackup:

 

Benm

0
Joined
Aug 16, 2007
Messages
7,896
Points
113
Very nice macro shots blord!

As for the emitter: Its actually the rectangular slab of material between the gold plate on top (with the wires going left) and the base 'plate' below it. The mirrors cannot be seen well in these pictures, but they are 'coated' on both small ends of that slab.
 

benmwv

0
Joined
Sep 10, 2010
Messages
1,380
Points
48
Took this after a FAC experiment with a 445.
Dont have any of the bare emitter though.

svyB3cHlxwOqCa7nGd7PRaDV1.jpg






And if there werent machines that could perform these tasks
there would be a surge in straight jacket sales :undecided:

That is an awesome picture! Did the FAC do anything good for the beam?

@blord
Nice pics. :beer:
How did it die? Is it led, just no light at all or what? I don't think there are any visible signs of damage like in FP or PBD's pictures
 

Blord

0
Joined
Dec 24, 2007
Messages
5,356
Points
0
It still works but no lase. Basically an expensive blue LED. No way I can repair this.
 

JLSE

1
Joined
Dec 13, 2007
Messages
3,580
Points
0
That is an awesome picture! Did the FAC do anything good for the beam?

I tried it with a tiny piece of glass fiber optic.. This is the best I could come up with
even though the center is hollow.

It did have an affect on the beam but need to play with the idea more. That piece
is epoxied in place, but it is much more difficult to find the right position. Comparing
the position to a c-mount for example, there is nothing to rest it on. The point of
emission is in a very awkward spot and getting it to sit just right is nearly impossible.

I got it close, and could not even guess how much it is off the center line, the beam
on that LD exits slightly crooked..

It appears to help the shape, but doesnt appear to help divergence. If I take another
stab at it, will definitely post some pics.

Im getting anxious just looking at that pic, mind boggling how small this is without
the magnification :drunk:
 
Joined
Aug 30, 2008
Messages
6,891
Points
83
+1 on the photos!

Why aren't you posting photos more often? those were amazing!
 




Top