Pman
0
- Joined
- Nov 28, 2012
- Messages
- 4,447
- Points
- 113
Well isn't a black light just UV light? There's tons of stuff like that out there.
LPF Donation via Stripe | LPF Donation - Other Methods
Links below open in new window
ArcticMyst Security by Avery
Gitd MS-SSW
- Thread starter tmackbb4
- Start date
Javalin
0
- Joined
- Aug 22, 2013
- Messages
- 370
- Points
- 43
I used to have a pretty small black light that would charge those GITD stars that you put in kids' rooms. In theory it should work just fine for your application, but if you wanted to charge the laser with lasers there are lots of ways to do it. Got a few ideas myself PM me if you get stuck or want another idea.
Edit: It was kind of like this one: http://www.ebay.com/itm/BLAZING-BLACKLIGHT-12-POWERFUL-FLUORESCENT-UV-handheld-8-Watts-Genuine-G-E-/290755568947?pt=US_DJ_Lighting_Single_Units&hash=item43b261e533
Edit: It was kind of like this one: http://www.ebay.com/itm/BLAZING-BLACKLIGHT-12-POWERFUL-FLUORESCENT-UV-handheld-8-Watts-Genuine-G-E-/290755568947?pt=US_DJ_Lighting_Single_Units&hash=item43b261e533
Last edited:
NO4H99
0
- Joined
- Sep 9, 2013
- Messages
- 552
- Points
- 0
5 seconds on each side with a decent UV flashlight should work great.
If you do want to incorporate it in the case, I'd take Pman's suggestion about the black light (which you can get for 15 dollars), and either put it on a switch, or wire it so that it only runs when the case is open.
Either way, Its a really cool idea and you're going to have to post some pics of the final setup
If you do want to incorporate it in the case, I'd take Pman's suggestion about the black light (which you can get for 15 dollars), and either put it on a switch, or wire it so that it only runs when the case is open.
Either way, Its a really cool idea and you're going to have to post some pics of the final setup
tmackbb4
0
- Joined
- Aug 9, 2013
- Messages
- 521
- Points
- 0
Definitely will show that off. Can't wait to start preliminary designs. Thanks for the tips guys.
IsaacT
0
- Joined
- Aug 25, 2010
- Messages
- 5,947
- Points
- 83
If you have the case(or atleast the lid) be acrylic, you could view the laser with the case closed. Pop the lid open to activate the blacklight to charge the GITD and you're good to go.
tmackbb4
0
- Joined
- Aug 9, 2013
- Messages
- 521
- Points
- 0
Wow getting elaborate. Just how I like it! Loving the ideas wannaburnstuff . Acrylic window with uv bulbs on either side hidden under the perimeter of the window. I want to put the laser on small brackets that suspend it without touching the gitd areas so I will not have to spin the laser in the case to charge it. Imagine like the arms that hold a sword display but something that goes around so it stay secure. Like some kind of locking c clip
Pman
0
- Joined
- Nov 28, 2012
- Messages
- 4,447
- Points
- 113
I hadn't seen the pic showing the focusing knob unitl now. Makes a huge difference the way you did that. Pman likes!
- Joined
- Aug 29, 2013
- Messages
- 28
- Points
- 0
Nice job there! +rep!
