Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

Scanner choice






H

Heavyen

0
Joined
Jun 21, 2010
Messages
7
Points
0
First one galvos are made by phenix technology (slower model of third galovs), and are overpriced by Ebay seller. (spacelas has them for much much cheaper - usd88)

Second one are from Laserworld which you should avoid as much as possible (all data is very exaggerated).

The third ones are best of all three.
 
KGB_Productions

KGB_Productions

0
Joined
Dec 1, 2008
Messages
878
Points
28
I second the DT suggestion. I have a pair of the DT 40 Pro Wide scanners and i can never run out of good things to say about them. The only "better" choice would be the scanpro50's(for graphics), but they cant scan at 90+ degrees like the 40 pro wides can.
Then there are the CT scanners, but that's another topic all together.


-Brooks
 
andy_con

andy_con

0
Joined
May 24, 2007
Messages
3,394
Points
0
KGB_Productions said:
I second the DT suggestion. I have a pair of the DT 40 Pro Wide scanners and i can never run out of good things to say about them. The only "better" choice would be the scanpro50's(for graphics), but they cant scan at 90+ degrees like the 40 pro wides can.
Then there are the CT scanners, but that's another topic all together.


-Brooks
Click to expand...

i third a set of DT's
 
E

ElektroFreak

0
Joined
Nov 7, 2008
Messages
5,725
Points
0
DTs are very good, but they are also the most expensive Chinese brand so they should be good. If a person is interested in a good value, the spacelas units are quite decent. They're perfect entry-level galvo sets. No complaints at all with my PT-20s, and the output is every bit as clean as my set of DT-25s.
 
Last edited:
Flaminpyro

Flaminpyro

0
Joined
May 4, 2009
Messages
5,443
Points
113
Howdy All I'm looking at the DT-40 WIDES and at $550 they are a good chunk of change so
I would like to hear from other people that have them or know more than me about them,
I have heard that the chinese models can self destruct under the wrong input. has any one blown up this model ?
Thanks and Have a good one :D
 
Last edited:
D

dnar

0
Joined
Jun 7, 2010
Messages
608
Points
0
Flaminpyro said:
Howdy All I'm looking at the DT-40 WIDES and at 550 they are a good chunk of change so
I would like to hear from other people that have them or know more than me about them, Thanks ;)
Have a good one :D
Click to expand...

I know there are a few guys over the fence at PL that rave about theirs...
 
Flaminpyro

Flaminpyro

0
Joined
May 4, 2009
Messages
5,443
Points
113
I'm too busy to visit PL I realy wish I had more time but someones got to keep the troops happy with heatsinks and kits :D
Thanks for the comeback dnar ;)
 
Flaminpyro

Flaminpyro

0
Joined
May 4, 2009
Messages
5,443
Points
113
Thank you for providing the link dnar I got to read the post there but PL would not
let me see his pictures with out logging on and I have to go to work right now.
Thanks and have a good day !


dnar said:
Well just take a quick look at this thread (with wiiiiiiiiide beam shots).

To quote "they are [good] stupid silly".

DT40 Wide Shots
Click to expand...
 
KGB_Productions

KGB_Productions

0
Joined
Dec 1, 2008
Messages
878
Points
28
I have the DT 40 Wides and they are the best set of scanners I have ever used. They can fill a small room allot easier than any other set I have owned. I purchased my set from Lasershowparts and they tuned them down to 30k. If you are going to be using the scanner in a smaller room it really makes the difference to get the WIDES. I can scan some shows at 90+ degrees. If you have the $$$ I would go with them.
 
E

ElektroFreak

0
Joined
Nov 7, 2008
Messages
5,725
Points
0
DTs are the best Chinese brand, but they cost more.. I highly recommend them if you have the cash.
 
You must log in or register to reply here.





Top