LPF Donation via Stripe | LPF Donation - Other Methods
Links below open in new window
ArcticMyst Security by Avery
help RGB laser scanner
- Thread starter carloto
- Start date
andy_con
0
- Joined
- May 24, 2007
- Messages
- 3,394
- Points
- 0
- Joined
- Jul 27, 2007
- Messages
- 3,642
- Points
- 63
carloto said:
you need:
red/green/blue lasers
two dichros
dichro mounts
mirrors
galvonometer set
digital to analog converter (DAC)
lasershow software to interface to the DAC
case to mount everything in
metal plate to mount the optics on
- Joined
- Aug 15, 2007
- Messages
- 1,880
- Points
- 0
MarioMaster said:
you need:
red/green/blue lasers
two dichros
dichro mounts
mirrors
galvonometer set
digital to analog converter (DAC)
lasershow software to interface to the DAC
case to mount everything in
metal plate to mount the optics on[/quote]
^^
That's about it. I really can't think of anything else to add... that is really all you need. Plus hours of work and patience to align everything.
pwnstar
0
- Joined
- Sep 12, 2007
- Messages
- 712
- Points
- 0
and sum safety goggles! if you don't already own some..
- Joined
- Jul 27, 2007
- Messages
- 3,642
- Points
- 63
pwnstar said:and sum safety goggles! if you don't already own some..
good point
- Joined
- Aug 15, 2007
- Messages
- 1,880
- Points
- 0
mliptack's goggles would be good for that. Multicoated OD 2+ 473, 532 and 635-650nm IIRC
andy_con
0
- Joined
- May 24, 2007
- Messages
- 3,394
- Points
- 0
and lots of wire and solder LOL
rog8811
0
- Joined
- Jul 24, 2007
- Messages
- 2,749
- Points
- 0
One PS3 sled will give you enough splitter cubes (use as dichro's) and your blue (well nearly blue) LD.
You can combine the 3 as shown below.... I have done it, it works, you will need to underdrive your green to dim it as it will overpower the red and the blueray.
You will need 2 X Aixiz modules for the red and blueray and a green module from DX, you will need to build drivers to adjust the intensities of each colour.
Regards rog8811
You can combine the 3 as shown below.... I have done it, it works, you will need to underdrive your green to dim it as it will overpower the red and the blueray.
You will need 2 X Aixiz modules for the red and blueray and a green module from DX, you will need to build drivers to adjust the intensities of each colour.
Regards rog8811
Attachments
