Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

2x hosts for 6 bucks?!






Joined
Jul 27, 2007
Messages
3,642
Points
63
the main problem I see is just a lack of space - i prefer hosts that have internal drivers or are already lasers (like some of the 5mw units) since they have plenty of space for you to fit the axiz module and diode driver
 

djra

0
Joined
Nov 16, 2008
Messages
22
Points
0
WOW, thank you!!!

That is IDENTICAL! I guess they do make a good host! :)
 

daguin

0
Joined
Mar 29, 2008
Messages
15,989
Points
113
djra said:
WOW, thank you!!!

That is IDENTICAL! I guess they do make a good host! :)


You're welcome. Old guys are still good for something, eh? ;) :D ;D :p

Peace,
dave
 
Joined
Aug 10, 2008
Messages
268
Points
18
here is another host that i modified. it is super small, and works great.

P1000464Small.jpg


P1000461Small.jpg


and the custom made heatsinks for it.

P1000376Small.jpg


P1000377Small.jpg


it runs off of 1 Ultrafire 16340 (CR123) battery and a PHR-803T diode with a Dr. Lava FlexDrive

P1000452Small.jpg



just had to add a tailcap clicky switch...

P1000464Small.jpg
 
Joined
Jul 24, 2008
Messages
1,415
Points
36
that is the exact same as jayrobs

i have used that host at least 8 times and it works great! actually my personal favorite!

its a tight fit but there is plenty of room for a flex drive or a rckstr driver
 

jayrob

0
Joined
Sep 21, 2007
Messages
9,862
Points
113
Not the exact same... pretty much the same exact size, but different brand.

My Pocket Mini host is made by UltraFire WF-602C. It says Cree on the side, and comes with a tail clicky already... a really nice smooth clicky at that!

Stephen Zolkov 12-5-08.jpg

Larry Atwood 12-4-08.jpg

Jay
 
Joined
Nov 24, 2007
Messages
2,735
Points
0
BE CAREFUL on the DX pocketpal...
It has a very low quality switch. It won't even turn on half the time.

It is a very tight fit, and you have to use thin and bendable wires, or else they will get twisted and short out the driver and the LD.
I would not recomend it to beginners, but if you can pull it off, then it is quite rewarding.
 




Top