Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

Protection glasses

Joined
Jun 4, 2010
Messages
39
Points
0
Hey,
I noticed that if I aim my 50mW green laser pointer through the red len of 3D glasses (in the type of red-blue lens 3D glasses) Almost all the light disappears and I see about 3mW dot. Then I tested it when I wore this glasses and I closed the eye on the blue len and when I checked if I could see the beam of the laser in the dark I didn't see any beam.
So does this red len can be used to as protection glasses?
Is it protecting enough? (The light transforms it's wavelength to one that I can't see?)

And the same questions about the blue len - I noticed that it is reducing the light power very much, I have only 5mW red laser pointer but when I aim it through the blue len there is almost no dot!
Thank you!

Some pictures:
My laser without len:
001.jpg


This is how you see the len when I point the green laser on it:
004.jpg


This is what you see on the wall:
007.jpg


This is what you see on the camera when you point it on it from 7cm distance:
008.jpg


This is the the light that returns when you aim the laser on the len:
013.jpg
 
Last edited:





Joined
Mar 16, 2012
Messages
319
Points
18
Do not !!! Stare at that red light !! Ever !! That's infrared light if I'm not mistaken or very bad radiation !
That's normal on lasers, maybe yours even has a it filter so just leave it has it is
 




Top