Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

No IR Filter?

H

Haz_622

0
Joined
Jul 3, 2007
Messages
52
Points
0
I heard that True DX 30's are meant to have IR filters on, But i did a little test on my laser, and it looks like it has no filter.

What i did was shine the laser through a bottle of Coca-Cola, with a camera on the other side. This blocks out most of the visible light, and allows IR to be seen. I assume the purple is IR? If so, is it safe, or should i get an IR filter?

This is what the video showed.
 

Attachments

  • IR.MOV
    2 MB · Views: 119





diachi

diachi

0
Joined
Feb 22, 2008
Messages
9,700
Points
113
Its safe, there is no need for concern for IR from a 30mW pointer.
 
diachi

diachi

0
Joined
Feb 22, 2008
Messages
9,700
Points
113
There might be a weak filter, but even if their isnt the IR isnt dangerous, the green however you should be careful with.

Could you shine your laser through cola towards a wall and look at the wall with the camera so I can get a better idea of the IR anyway, so I can give you a definite yes or no as to wether it has a filter or not.

Diachi
 
MarioMaster

MarioMaster

0
Joined
Jul 27, 2007
Messages
3,642
Points
63
it seems hit and miss, some DX lasers are well filtered (one i had output only a fraction of a mW) and some seem to output much more

either way it's not enough power to be concerned with
 
H

Haz_622

0
Joined
Jul 3, 2007
Messages
52
Points
0
There might be a weak filter, but even if their isnt the IR isnt dangerous, the green however you should be careful with.

Could you shine your laser through cola towards a wall and look at the wall with the camera so I can get a better idea of the IR anyway, so I can give you a definite yes or no as to wether it has a filter or not.
Click to expand...

Here is the IR against the wall

Diachi
 

Attachments

  • IRwall.MOV
    1.3 MB · Views: 118
diachi

diachi

0
Joined
Feb 22, 2008
Messages
9,700
Points
113
Theres certainly not much there :eek: less than I expected.

Safe to say its filtered :p
 
I

iamalloy

0
Joined
Jun 22, 2008
Messages
7
Points
0
What's the big deal with IRs?

If they are only a fraction of the laser power, how could it be more dangerous than the laser beam itself? Of course not those ones that has crappy IR like 80% IR and 20% green...shouldn't people be more careful with the laser beam itself?

also, many people here are blaming wicked for under specs lasers, yet how many people know that with IR filter, you can expect a laser power to reduce as much as 40% of the full power output. as far as I know, filters not only weaken the IR but also reduce the power at the light source as a whole, or am I wrong about this?

I don't know for sure, but in my opinion, wicked lasers is marketing their products as its unfiltered power although the filtered power is much less...anyone has a thought on this?
 
Bionic-Badger

Bionic-Badger

0
Joined
Oct 26, 2007
Messages
5,438
Points
83
Actually, I think the real danger is when you're using goggles to block out the green, because then the light doesn't look bright to your eyes and the pupils remain dialated.

With those "True" lasers, I'm guessing it's more that the crystals inside are higher quality, so they turn more of the IR into green light, not so much that they stuck some filter in front. For me to consider a green laser filtered, it better generate as little IR as a PGL-III.
 
C

cody48

0
Joined
Jul 7, 2008
Messages
10
Points
0
I've got this same laser, and I was wondering about the IR myself. So last night I took my digital camera and used it to look for IR, and I noticed that within about the first second or two of turning the laser on, ther is an actual BEAM of IR shining slightly to the side of the green laser. :eek: It goes away pretty quickly and doesn't come back until the laser cools and I turn it back on.

Should I be worried about this temporary second beam?? :-?
 
diachi

diachi

0
Joined
Feb 22, 2008
Messages
9,700
Points
113
Where was the beam, inside the thing you were shining it in ?
 
styropyro

styropyro

0
Joined
Jun 13, 2007
Messages
5,410
Points
113
Can you give us a picture of this? Are you sure it was a secondary beam and not just the camera blooming?
 
C

cody48

0
Joined
Jul 7, 2008
Messages
10
Points
0
Sure, I'll see if I can get a decent picture of it. Quick question, how do I post pictures/video once I get one?
 
diachi

diachi

0
Joined
Feb 22, 2008
Messages
9,700
Points
113
use the attachment bit at the bottom, or use a file host to host your files and use tags like [media] [/media.] or
img.]
 
You must log in or register to reply here.




Top