Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

I Fixed My Romisen's button without modification

Joined
Jun 7, 2007
Messages
1,771
Points
0
i found a VERY easy to fix this button issue, anyone can do it, and it only takes seconds.
i found that if you simply take a piece of toilet paper (yes, lol), preferably the soft fluffy kind lol, and just use a small screwdriver to push it under the board, this works perfect. ive done it to mine, and now its BETTER than new!
 





Joined
Dec 24, 2007
Messages
309
Points
0
Re: I Fixed My Romisen's button without modificati

Do you insert it from the back of the laser, or do you have to take it apart?
 
Joined
Jun 7, 2007
Messages
1,771
Points
0
Re: I Fixed My Romisen's button without modificati

cbrian4 said:
Do you insert it from the back of the laser, or do you have to take it apart?
just take the battery out and shove it in with a small screwdriver. actually i didnt just SHOVE it in, i tried to position it against the inside kinda making the shape of the inside, then i used the screwdriver to slide it down, once it was pushing against the foam and mainboard, i just poked at it till it was stuffed under the mainboard. If you do it right you should feel it lift and feel the button higher up.
 
Joined
Dec 24, 2007
Messages
309
Points
0
Re: I Fixed My Romisen's button without modificati

yeah i did it works great [smiley=thumbsup.gif] Also i wouldn't use toilet paper cause it can shred into tiny bits and get all over the board. I used an orbits wrapper! i also pot modded mine and it got maybe 5mW brighter because its one of those resetting pots and nearly impossible to tell if you've gone to far or not far enough.
 




Top