Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

Xeno Cube for a host??

B

BIGGUN

0
Joined
Feb 3, 2012
Messages
76
Points
0
01%20XENO%20CUBE%20E11.jpg


I really like the looks of this housing but wondered what all could be hosted in it?

LINK to: XENO CUBE E11 V7 Flashlight

It looks like the driver is a linear driver with 3 modes.

*.Using Ni-MH battery:
Low (135mA/40lms/4hrs), Ultra Low (20mA/10lms/20hrs), High (450mA/140lms/1hr)
*.Using Li-ion battery
Low (350mA/110lms/2hrs), Ultra Low (150mA/50lms/5hrs), High (800mA/220lms/1hr)

Would it be possible to keep this driver and use it in a laser application? If not I still think the housing is sweet.


Kevin
 





JaiNobeZ

JaiNobeZ

0
Joined
Jan 21, 2010
Messages
935
Points
0
They missed out one vital piece of information on their website.


THE PRICE!! :yabbmad:
 
Last edited:
B

BIGGUN

0
Joined
Feb 3, 2012
Messages
76
Points
0
They're aren't cheap. I didn't want to link to a sales site for fear of people thinking it was spam. I've seen them from $79 to $100. Not cheap enough to go out and get if it won't work.... but for a high power build it becomes a little less relevant.

Yeah! It was Lazerer's one that got me looking!

Kevin
 
Blord

Blord

0
Joined
Dec 24, 2007
Messages
5,356
Points
0
One advantage with the Cube host, it won't rolled off the table by accident. It happens to me once with the C6 host, destroying the glass window and denting the host on stone floor. You can still that host in my C6 collection picture, the one with the tape around :D
 
Joe Mo

Joe Mo

0
Joined
Jan 4, 2012
Messages
317
Points
0
Pm rhd or jay rob, they will let you know. I love how that looks!
 
offroadfreak8582

offroadfreak8582

0
Joined
Oct 14, 2011
Messages
2,369
Points
83
i think that would look great with a focus adapter from moh! but too bad it is so expensive!

greetings,,
 
Joe Mo

Joe Mo

0
Joined
Jan 4, 2012
Messages
317
Points
0
a focus adapter flush with the front edge of the cube ;) I would so buy this, if someone can figure out the process/sizes :)
 
B

BIGGUN

0
Joined
Feb 3, 2012
Messages
76
Points
0
Polonium210 said:
That host is awesome! I made one of my first 260mW 660's in that host run off two cr123a's
All sizes | IMG_1262 | Flickr - Photo Sharing!

All sizes | IMG_1269 | Flickr - Photo Sharing!

My next build in that host will be a 1watt 445 with a custom focus adapter :D
Click to expand...

What happened to it?

Do you have a parts list for the build? Do you have any details of the build? How much of a PIA was it? What parts were used and what parts were tossed? How much custom machining was done?

DETAILS DETAILS DETAILS!!!!!!! :thanks:


Kevin
 
Last edited:
Polonium210

Polonium210

0
Joined
Nov 8, 2011
Messages
404
Points
28
I'm not sure what you mean "What happened to it?"
I still have it and I have 3 more of the same host that I'm building some 1W M140 445's in.
Here is a link to the host:
Small Sun A33 Square Tube Flashlight(18650) With 3 Modes, 120 Lumens | eBay
A lot cheaper than $79-$100 bucks.

I own a mini metal lathe that I make the heat sinks and focus adapters on.*The stock driver will not work but the pill has room to fit a micro Flexdrive v5. You will have to make a battery contact board to fit where the 17mm round stock driver was. The host comes anodized black but I De-anodized and polished it to a mirror finish and it looks great :D
If you need any more details let me know.
Hope this helps :wave:
 
Last edited:
B

BIGGUN

0
Joined
Feb 3, 2012
Messages
76
Points
0
Sweet! Thanks a ton!

I didn't know if you still had it. Didn't recognize it in your sig.

Would you be willing to sell some of the machined parts if there was enough interest?

Kevin
 
Polonium210

Polonium210

0
Joined
Nov 8, 2011
Messages
404
Points
28
PM me :D
I have been too busy to add them to my sig.
BIGGUN said:
Sweet! Thanks a ton!

I didn't know if you still had it. Didn't recognize it in your sig.

Would you be willing to sell some of the machined parts if there was enough interest?

Kevin
Click to expand...
 
Last edited:
You must log in or register to reply here.




Top