Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

Portable 1/2 Watt RGB

Joined
Dec 6, 2008
Messages
1,581
Points
63
New project I have been working on:

RGB.jpg


A portable Lab laser with 650nm Red, 445nm Blue and 532nm Green primaries.

It is powered by two #18650 3400mah Panasonic cells for run times of over 2.5 hours.
(Or 9-12 VDC @ 1 amp plug-in supply)

Switches control White, Red, Blue, Green, Magenta, Turquoise, and Yellow/Green.
(Or individual TTL control of R,G & B)

Inside it has actual adjustable dichroic mounts:

DichroicMT.jpg


These should allow better far-field alignment.

Complete with batteries it weights 1 lb. 6 oz.and is 4" long.

Next, is a processor to automate color changes.

Power Levels:
200mw Blue 460
80mw Green 532
120mw Red 650

LarryDFW
 
Last edited:





Joined
Dec 31, 2012
Messages
904
Points
0
I've been salivating over the idea of owning an RGB Spiro party setup for many years. It's encouraging to see this may soon be in my future at a reasonable cost. I guess gas lasers and quadrature oscillators are a thing of the past.
 
Joined
Mar 27, 2011
Messages
14,125
Points
113
Would you mind sending me a PM with info as well? I've been thinking about grabbing an rgb white for a while, just can't seem to pull the trigger.
 
Joined
Nov 10, 2008
Messages
4,186
Points
63
It costs $168, has 470nm in it, and is 'not DPSS laser' as stated on the bottom ? There must be something I missed ..

Probably wrong info.
I was just wondering whether larry is the same guy i linked on ebay, because the product looks like the same. These are nice little portables :)
Seriously, you can build yourself a very cheap rgb projector with one of these. Not sure if the colors would be good enough for shows that require analogue modulation though. Still hell of a deal imo :)
 
Last edited:
Joined
Dec 6, 2008
Messages
1,581
Points
63
Rodman;

Here is a still photo I took with an 1/8 second exposure:

RGBdif.jpg


It only caught a portion of the pattern I was creating by hand.

You can see the white arc in the center, and the sharp lines of the blue, green and red.

LarryDFW
 
Last edited:
Joined
Dec 6, 2008
Messages
1,581
Points
63
Silvershot;

I am very impressed with the alignment and quality of this RGB laser module.

When you consider the the price point of ~$160,

it is an amazing feat.

The "White Fusion" RGB modules were ~$320 for less power.

LarryDFW
 
Last edited:
Joined
Apr 2, 2009
Messages
10,662
Points
113
It costs $168, has 470nm in it, and is 'not DPSS laser' as stated on the bottom ? There must be something I missed ..

Or more likely it is a Kasio 445- so far that seems to be the current belief- there is a thread on this started ny Merry at Laserlands<-username

Probably wrong info.
I was just wondering whether larry is the same guy i linked on ebay, because the product looks like the same. These are nice little portables :)
Seriously, you can build yourself a very cheap rgb projector with one of these. Not sure if the colors would be good enough for shows that require analogue modulation though. Still hell of a deal imo :)

...
ATM we dont know if the LLands version even has TTL and no doubt it is NOT anallog..


Silvershot;

I am very impressed with the alignment and quality of this RGB laser module.

When you consider the the price point of ~$160,

it is an amazing feat.

The "White Fusion" RGB modules were ~$320 for less power.

LarryDFW

Even if Larry needs to charge more than the laserlands version I am sure it will be better- arrive sooner-have better aftre-the -sale support and the obvious diff. of being both portable and able to run off mains .

And Larry has used 'REAL' dichros mounts that are adjustable- that is a huge improvement. My 532/200mW module from LLands was only a tad ove 40 mW- and no replacement was offered when I asked.. so-- shop LPF -- :beer::beer: to Larry

hak
 
Joined
May 17, 2013
Messages
971
Points
0
I am interested in one ,but I can't really decide without a price tag lol
 

M7CC

0
Joined
Jan 23, 2013
Messages
10
Points
0
LarryDFW, would a kit like this interface well with yours? I assume the RGB outputs would hook up to your inputs but what about the power leads and limiting resistors he refers to?


I'm pretty handy with a soldering iron but need a little help with the whole circuit design thing...
 




Top