Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

Metalworking Lathe on-the-cheap?

Joined
Nov 18, 2009
Messages
253
Points
0
I have a general question.

I'm sure most of us can't just go out and buy a metalworking lathe for machining heat sinks, flashlight mods, etc... My guess is something like that isn't cheap.

But could you use a regular power drill to do the job?

I'm sure you'd need a way of securing the aluminum so it doesn't move, and making sure you drill STRAIGHT through. And maybe special bits.

So, is there a poor man's lathe out there?
 





Joined
Jan 7, 2007
Messages
6,309
Points
83
Harbor Freight has two small lathes. I have the 7x10 which works great for me. You will need to also buy things like tool holders, bits, center drills etc. It's almost as much fun machining as lasers!

HMike
 
Joined
Nov 18, 2009
Messages
253
Points
0
Wait, what??!! You mean this?? That's not my idea of "on-the-cheap." :eek:

Even a 4 x 5 is still $300.

Yeah, so back to the power drill idea....... LOL.
 
Last edited:
Joined
Jan 2, 2009
Messages
11,800
Points
0
Its not going to happen. There is a lot of stress put on those machines. A drill is not made to take that kind of abuse. Even if you could, by the time you pay for all the attachments you could have bought one. Just lurks Craigslist. Sometimes you can find an older machine that needs a motor or something.
 

Things

0
Joined
May 1, 2007
Messages
7,517
Points
0
$300 for a lathe is extremely cheap. If you have a machine shop local, see if they can do it for you.
 
Joined
Oct 24, 2006
Messages
2,032
Points
0
Yeah, I'm sorry but if $300 surprises you you're gunna have a hard time. Even the $1000 grizzly lathe I use often can't pull off basic tasks.

For small diameter things that aren't too long you can stick them in the drill chuck to turn them (your limitation is probably a 3/8" diam chuck, 1/2" if you're lucky). Keep in mind the drill's bearings are made for load along the drilling axis, not for the radial load you'll put on it for lathe use (an angle grinder would be better if there was an easy way to hold the workpiece to it). From there, and with some sandpaper you can get away with cleaning/polishing the surface of metal and maybe some light removal. With wood and coarse sandpaper you can maybe do some more interesting things.

For any serious work though, especially cutting metal, high rigidity of your setup is important. That means your cutting tool, toolholder, workpiece, etc... everything must not deflect more than a minute fraction of a mm (even that is too much!) or its not even worth trying. Unfortunately, that means you gotta have a good amount of machine and slideways that are precisely made to do any real work, and that runs into $$. Sorry. Perhaps you can get some of what you want done with a dremel/rotary tool?
 
Joined
Oct 24, 2009
Messages
2,555
Points
48
Simple answer yes you can use a "drill" as a mini lathe.
First off you need to decide what drill you want to use or motor.
A hammer drill works best as it has spots for a handle which can be removed and secured to a rig.
As far as motors i have seen them made out of motors from old treadmills.
here are examples;
This one can be made out of parts from the store and will not ruin your drill.
http://www.btinternet.com/~two.mm/articles/fonly/lathe_overview.jpg
This one here is the best but you have to find someone with a broken lathe.
http://www.rolandandcaroline.co.uk/assets/images/lathedrill.jpg
the famous treadmill/ washing machine motor design kinda like the second.
http://www.rolandandcaroline.co.uk/lathe/lathe2a.jpg
Turning the peice of work is not the hard part.
These are used mainly for wood. the main reason is there is no precision movement as you would need to use for metal working.
The hole for the laser is also easy in concept but a bit difficult to setup. all you do is mount a dril bit to the moving head stock or the back and press it up against the peice spinning on the drill. this will help hold the peice and cut threw it. use lots of lube.
http://www.mini-lathe.com/Mini_lathe/Features/lathe.gif
Best way is to set the hole is to set the tail stock back against the peice nice and tight. remeber to have that tail stock on 2 good drawer sildes. have a bolt mounted to a peice of wood behind it and slowly turn it pushing it evenly against the tail stock. this will give you precision depth for your cuts.
honestly i would never make one again. i have made one and in the beggining i hurt myself alot. alot alot. things broke and hit me and cut me. but what you are trying to make is this but out of hard ware parts
Taig Tools - Desktop Milling Machines and Lathes. sub the chuck and big motor for a drill.
this stuff can go for around 200$ on ebay
after parts and time you are looking at and around 150$-350$. 150 is if you are lucky and know where to get your stuff. junk yards are a great place to look.
7" x 10" PRECISION METAL MINI LATHE 110 V - eBay (item 370320808456 end time Jan-15-10 20:50:12 PST)

if you are just looking into making a heat sink the best way it to find the dia of the metal you want to get or make a drill press. (google it if you need to.) Buy a specialty bit the exact size you need it. you will not find the bit you need at a store or at least i was unable to. pick up a set of taping tools
Harbor Freight Tools
if you want to find metal in lots of shapes and sizes look from a local metal store or go to Online Metal Store | Small Quantity Metal Orders | Metal Cutting, Sales & Shipping | Buy Steel, Aluminum, Copper, Brass, Stainless | Metal Product Guides at OnlineMetals.com

if you can not make one go and find a machine shop in your local listing and ask them to make it for you. alot cheaper that building the whole rig.
Lastly sounds weird but high schools and some middle schools have metal lathes ask the school if you can use there equipment. or get the shop teachers email and tell him what you want to do.
 




Top