Old 03-25-2012, 11:41 PM #1
mikesnap99's Avatar
Class 1 Laser
 
Join Date: Nov 2011
Posts: 79
Rep Power: 10
mikesnap99 is a jewel in the roughmikesnap99 is a jewel in the roughmikesnap99 is a jewel in the roughmikesnap99 is a jewel in the rough
mikesnap99 mikesnap99 is offline
Class 1 Laser
mikesnap99's Avatar
 
Join Date: Nov 2011
Posts: 79
Rep Power: 10
mikesnap99 is a jewel in the roughmikesnap99 is a jewel in the roughmikesnap99 is a jewel in the roughmikesnap99 is a jewel in the rough
Default Looking for someone to laser cut a logo

Hi guys, I'm looking for someone to cut a logo (picture below) into a piece of clear acrylic material. It would be in a rather small piece with the dimensions of 2.5'' height and 3.5'' length. I'll gladly pay for shipping and any other costs. Just looking for quotes, so any one with the correct machinery is welcome to post. Thanks for you help!



Mike


__________________
~1.9Watt: 445nm Elite Aurora C6, Xdrive at 1.76A
200mW: O-Like Newstyle Red
50mW: O-Like PowerRock Waterproof and Focusable
100mW: DIY 405nm Lab

COMING SOON: GGW 6x B50 host!

REVIEW AND BUILD PAGES:

445nm:

http://************.com/showthread.p...-with-a-Xdrive

405nm:

http://************.com/showthread.p...ld-Finished%21

532nm

http://************.com/showthread.p...=1585#post1585

Last edited by mikesnap99; 03-26-2012 at 09:09 PM.
mikesnap99 is offline   Reply With Quote


















Old 03-26-2012, 12:59 PM #2
Class 4 Laser
 
Join Date: May 2007
Location: Queensland, AU
Posts: 7,549
Rep Power: 2560
Things has a reputation beyond reputeThings has a reputation beyond reputeThings has a reputation beyond reputeThings has a reputation beyond reputeThings has a reputation beyond reputeThings has a reputation beyond reputeThings has a reputation beyond reputeThings has a reputation beyond reputeThings has a reputation beyond reputeThings has a reputation beyond reputeThings has a reputation beyond repute
Things Things is offline
Class 4 Laser
 
Join Date: May 2007
Location: Queensland, AU
Posts: 7,549
Rep Power: 2560
Things has a reputation beyond reputeThings has a reputation beyond reputeThings has a reputation beyond reputeThings has a reputation beyond reputeThings has a reputation beyond reputeThings has a reputation beyond reputeThings has a reputation beyond reputeThings has a reputation beyond reputeThings has a reputation beyond reputeThings has a reputation beyond reputeThings has a reputation beyond repute
Default Re: Looking for someone to laser cut a logo

Ack, this is why I can't wait to have my machine up and running, I'd happily do simple little jobs like this for people

Let me know if you're still looking within a months time

For now though, contact "MarioMaster" here on the forums. He has a small laser cutter and might be able to help you out.

Last edited by Things; 03-26-2012 at 01:01 PM.
Things is offline   Reply With Quote
Old 03-26-2012, 09:05 PM #3
mikesnap99's Avatar
Class 1 Laser
 
Join Date: Nov 2011
Posts: 79
Rep Power: 10
mikesnap99 is a jewel in the roughmikesnap99 is a jewel in the roughmikesnap99 is a jewel in the roughmikesnap99 is a jewel in the rough
mikesnap99 mikesnap99 is offline
Class 1 Laser
mikesnap99's Avatar
 
Join Date: Nov 2011
Posts: 79
Rep Power: 10
mikesnap99 is a jewel in the roughmikesnap99 is a jewel in the roughmikesnap99 is a jewel in the roughmikesnap99 is a jewel in the rough
Default Re: Looking for someone to laser cut a logo

Thank You both of you! @things would you happen to have it set up before may 13? It's actually not for me but for a birthday pressent for a very kind friend of mine that made me a rockin gift last year. I really wanted to repay the favor and make something just as cool. I dont mind waiting if you are up for the job because I'm so ahead of the game time wise. Thanks

Mike
__________________
~1.9Watt: 445nm Elite Aurora C6, Xdrive at 1.76A
200mW: O-Like Newstyle Red
50mW: O-Like PowerRock Waterproof and Focusable
100mW: DIY 405nm Lab

COMING SOON: GGW 6x B50 host!

REVIEW AND BUILD PAGES:

445nm:

http://************.com/showthread.p...-with-a-Xdrive

405nm:

http://************.com/showthread.p...ld-Finished%21

532nm

http://************.com/showthread.p...=1585#post1585
mikesnap99 is offline   Reply With Quote
Old 03-27-2012, 02:39 AM #4
Class 4 Laser
 
Join Date: May 2007
Location: Queensland, AU
Posts: 7,549
Rep Power: 2560
Things has a reputation beyond reputeThings has a reputation beyond reputeThings has a reputation beyond reputeThings has a reputation beyond reputeThings has a reputation beyond reputeThings has a reputation beyond reputeThings has a reputation beyond reputeThings has a reputation beyond reputeThings has a reputation beyond reputeThings has a reputation beyond reputeThings has a reputation beyond repute
Things Things is offline
Class 4 Laser
 
Join Date: May 2007
Location: Queensland, AU
Posts: 7,549
Rep Power: 2560
Things has a reputation beyond reputeThings has a reputation beyond reputeThings has a reputation beyond reputeThings has a reputation beyond reputeThings has a reputation beyond reputeThings has a reputation beyond reputeThings has a reputation beyond reputeThings has a reputation beyond reputeThings has a reputation beyond reputeThings has a reputation beyond reputeThings has a reputation beyond repute
Default Re: Looking for someone to laser cut a logo

Hi Mike, it's hard to tell, I myself was hoping to have it done well within April, because if it isn't, I'll probably end up going insane! I have so much cool stuff I wanna do with it as well.

I have just moved house though, so I'm waiting for it to arrive here, most likely this week, then I can get back to work on it.

However, I live in Australia, so not sure how economical shipping would be. Have you tried contacting MarioMaster?

I'm assuming you don't live in Australia here, since you haven't filled out your profile

Just for kicks, how would you want it done? Raster engrave the text and outer boxes, and just cut out the outline?

Dan

Last edited by Things; 03-27-2012 at 02:49 AM.
Things is offline   Reply With Quote
Old 03-27-2012, 02:53 AM #5
mikesnap99's Avatar
Class 1 Laser
 
Join Date: Nov 2011
Posts: 79
Rep Power: 10
mikesnap99 is a jewel in the roughmikesnap99 is a jewel in the roughmikesnap99 is a jewel in the roughmikesnap99 is a jewel in the rough
mikesnap99 mikesnap99 is offline
Class 1 Laser
mikesnap99's Avatar
 
Join Date: Nov 2011
Posts: 79
Rep Power: 10
mikesnap99 is a jewel in the roughmikesnap99 is a jewel in the roughmikesnap99 is a jewel in the roughmikesnap99 is a jewel in the rough
Default Re: Looking for someone to laser cut a logo

Ah yes my bad. I'm I'm the US (Massachusetts). I'll give Mariomaster a ping right now to see what he can do. I'll keep you in the back of my head if all else fails. How much would all the material and labor cost, just lookin for a quote.

Mike
__________________
~1.9Watt: 445nm Elite Aurora C6, Xdrive at 1.76A
200mW: O-Like Newstyle Red
50mW: O-Like PowerRock Waterproof and Focusable
100mW: DIY 405nm Lab

COMING SOON: GGW 6x B50 host!

REVIEW AND BUILD PAGES:

445nm:

http://************.com/showthread.p...-with-a-Xdrive

405nm:

http://************.com/showthread.p...ld-Finished%21

532nm

http://************.com/showthread.p...=1585#post1585

Last edited by mikesnap99; 03-27-2012 at 02:56 AM.
mikesnap99 is offline   Reply With Quote
Old 03-27-2012, 06:00 AM #6
MarioMaster's Avatar
Class 3B Laser
 
Join Date: Jul 2007
Location: Allentown, PA
Posts: 3,626
Rep Power: 44935
MarioMaster has a reputation beyond reputeMarioMaster has a reputation beyond reputeMarioMaster has a reputation beyond reputeMarioMaster has a reputation beyond reputeMarioMaster has a reputation beyond reputeMarioMaster has a reputation beyond reputeMarioMaster has a reputation beyond reputeMarioMaster has a reputation beyond reputeMarioMaster has a reputation beyond reputeMarioMaster has a reputation beyond reputeMarioMaster has a reputation beyond repute
Send a message via AIM to MarioMaster
MarioMaster MarioMaster is online now
Class 3B Laser
MarioMaster's Avatar
 
Join Date: Jul 2007
Location: Allentown, PA
Posts: 3,626
Rep Power: 44935
MarioMaster has a reputation beyond reputeMarioMaster has a reputation beyond reputeMarioMaster has a reputation beyond reputeMarioMaster has a reputation beyond reputeMarioMaster has a reputation beyond reputeMarioMaster has a reputation beyond reputeMarioMaster has a reputation beyond reputeMarioMaster has a reputation beyond reputeMarioMaster has a reputation beyond reputeMarioMaster has a reputation beyond reputeMarioMaster has a reputation beyond repute
Send a message via AIM to MarioMaster
Default Re: Looking for someone to laser cut a logo

Are you looking to have parts of the logo completely cut out or just have it etched in the surface?

I'm not sure if my machine will really cut through acrylic without melting it a lot since it doesn't have air assist. Etching I can do no problem though.
__________________
ILT 5500KR krypton only air cooled ion 100mW 647.1nm | ILT 5500AR argon only air cooled ion >300mW multiline
Omnichrome 643 air cooled Ar/Kr ion 10mW 676.4nm 647.1nm 568.2nm 488nm 476.2nm (high hours)
Spectra Physics 127 >30mW 632.8nm HeNe | Uniphase 1.5mW 543.5nm GreeNe
Coherent Innova 90 argon ion water cooled ??W (got plasma, alignment in progress)
Coherent 60W 830nm water cooled diode brick | Shenhui Laser 40W 10600nm water cooled CO2

(9:03:50 PM) Picasso: the best guys i saw ever at burning man was two dudes dressed as all green army men shooting pants at naked guys
MarioMaster is online now   Reply With Quote
Old 03-27-2012, 12:07 PM #7
mikesnap99's Avatar
Class 1 Laser
 
Join Date: Nov 2011
Posts: 79
Rep Power: 10
mikesnap99 is a jewel in the roughmikesnap99 is a jewel in the roughmikesnap99 is a jewel in the roughmikesnap99 is a jewel in the rough
mikesnap99 mikesnap99 is offline
Class 1 Laser
mikesnap99's Avatar
 
Join Date: Nov 2011
Posts: 79
Rep Power: 10
mikesnap99 is a jewel in the roughmikesnap99 is a jewel in the roughmikesnap99 is a jewel in the roughmikesnap99 is a jewel in the rough
Default Re: Looking for someone to laser cut a logo

^^^ well I would like to cut the part out but etching will work too. Can you see the design clearly or is it faint. Thanks Mariomaster for your consideration

Mike
__________________
~1.9Watt: 445nm Elite Aurora C6, Xdrive at 1.76A
200mW: O-Like Newstyle Red
50mW: O-Like PowerRock Waterproof and Focusable
100mW: DIY 405nm Lab

COMING SOON: GGW 6x B50 host!

REVIEW AND BUILD PAGES:

445nm:

http://************.com/showthread.p...-with-a-Xdrive

405nm:

http://************.com/showthread.p...ld-Finished%21

532nm

http://************.com/showthread.p...=1585#post1585
mikesnap99 is offline   Reply With Quote
Old 03-27-2012, 12:53 PM #8
Class 4 Laser
 
Join Date: May 2007
Location: Queensland, AU
Posts: 7,549
Rep Power: 2560
Things has a reputation beyond reputeThings has a reputation beyond reputeThings has a reputation beyond reputeThings has a reputation beyond reputeThings has a reputation beyond reputeThings has a reputation beyond reputeThings has a reputation beyond reputeThings has a reputation beyond reputeThings has a reputation beyond reputeThings has a reputation beyond reputeThings has a reputation beyond repute
Things Things is offline
Class 4 Laser
 
Join Date: May 2007
Location: Queensland, AU
Posts: 7,549
Rep Power: 2560
Things has a reputation beyond reputeThings has a reputation beyond reputeThings has a reputation beyond reputeThings has a reputation beyond reputeThings has a reputation beyond reputeThings has a reputation beyond reputeThings has a reputation beyond reputeThings has a reputation beyond reputeThings has a reputation beyond reputeThings has a reputation beyond reputeThings has a reputation beyond repute
Default Re: Looking for someone to laser cut a logo

Something like this? The red part being raster engraved, the green being the piece of acrylic it's engraved on?

Things is offline   Reply With Quote
Old 03-27-2012, 08:07 PM #9
mikesnap99's Avatar
Class 1 Laser
 
Join Date: Nov 2011
Posts: 79
Rep Power: 10
mikesnap99 is a jewel in the roughmikesnap99 is a jewel in the roughmikesnap99 is a jewel in the roughmikesnap99 is a jewel in the rough
mikesnap99 mikesnap99 is offline
Class 1 Laser
mikesnap99's Avatar
 
Join Date: Nov 2011
Posts: 79
Rep Power: 10
mikesnap99 is a jewel in the roughmikesnap99 is a jewel in the roughmikesnap99 is a jewel in the roughmikesnap99 is a jewel in the rough
Default Re: Looking for someone to laser cut a logo

Ya I was looking more for a the rectangle of acrylic material with the logo in the middle either engrave on or cut out. It's going to be apoxied between two post so a rectangular piece is more desirable. Thanks for putting that image out there.

Mike
__________________
~1.9Watt: 445nm Elite Aurora C6, Xdrive at 1.76A
200mW: O-Like Newstyle Red
50mW: O-Like PowerRock Waterproof and Focusable
100mW: DIY 405nm Lab

COMING SOON: GGW 6x B50 host!

REVIEW AND BUILD PAGES:

445nm:

http://************.com/showthread.p...-with-a-Xdrive

405nm:

http://************.com/showthread.p...ld-Finished%21

532nm

http://************.com/showthread.p...=1585#post1585
mikesnap99 is offline   Reply With Quote
Old 03-28-2012, 04:23 AM #10
TheTeslaWarrior's Avatar
Class 2 Laser
 
Join Date: Aug 2009
Location: California, us
Posts: 404
Rep Power: 60
TheTeslaWarrior has a reputation beyond reputeTheTeslaWarrior has a reputation beyond reputeTheTeslaWarrior has a reputation beyond reputeTheTeslaWarrior has a reputation beyond reputeTheTeslaWarrior has a reputation beyond reputeTheTeslaWarrior has a reputation beyond reputeTheTeslaWarrior has a reputation beyond reputeTheTeslaWarrior has a reputation beyond reputeTheTeslaWarrior has a reputation beyond reputeTheTeslaWarrior has a reputation beyond reputeTheTeslaWarrior has a reputation beyond repute
TheTeslaWarrior TheTeslaWarrior is offline
Class 2 Laser
TheTeslaWarrior's Avatar
 
Join Date: Aug 2009
Location: California, us
Posts: 404
Rep Power: 60
TheTeslaWarrior has a reputation beyond reputeTheTeslaWarrior has a reputation beyond reputeTheTeslaWarrior has a reputation beyond reputeTheTeslaWarrior has a reputation beyond reputeTheTeslaWarrior has a reputation beyond reputeTheTeslaWarrior has a reputation beyond reputeTheTeslaWarrior has a reputation beyond reputeTheTeslaWarrior has a reputation beyond reputeTheTeslaWarrior has a reputation beyond reputeTheTeslaWarrior has a reputation beyond reputeTheTeslaWarrior has a reputation beyond repute
Default Re: Looking for someone to laser cut a logo

I can probably help you out. The VLS has no problem cutting acrylic and i have plenty of acrylic just lying around.

What thickness of acrylic do you need?

Edit: If it's .125" acrylic, I can probably engrave for the cost of shipping.
__________________
my wavelengths:

http://laserpointerforums.com/f43/un...0-a-56708.html

Last edited by TheTeslaWarrior; 03-28-2012 at 04:25 AM.
TheTeslaWarrior is offline   Reply With Quote
Old 03-28-2012, 06:29 AM #11
MarioMaster's Avatar
Class 3B Laser
 
Join Date: Jul 2007
Location: Allentown, PA
Posts: 3,626
Rep Power: 44935
MarioMaster has a reputation beyond reputeMarioMaster has a reputation beyond reputeMarioMaster has a reputation beyond reputeMarioMaster has a reputation beyond reputeMarioMaster has a reputation beyond reputeMarioMaster has a reputation beyond reputeMarioMaster has a reputation beyond reputeMarioMaster has a reputation beyond reputeMarioMaster has a reputation beyond reputeMarioMaster has a reputation beyond reputeMarioMaster has a reputation beyond repute
Send a message via AIM to MarioMaster
MarioMaster MarioMaster is online now
Class 3B Laser
MarioMaster's Avatar
 
Join Date: Jul 2007
Location: Allentown, PA
Posts: 3,626
Rep Power: 44935
MarioMaster has a reputation beyond reputeMarioMaster has a reputation beyond reputeMarioMaster has a reputation beyond reputeMarioMaster has a reputation beyond reputeMarioMaster has a reputation beyond reputeMarioMaster has a reputation beyond reputeMarioMaster has a reputation beyond reputeMarioMaster has a reputation beyond reputeMarioMaster has a reputation beyond reputeMarioMaster has a reputation beyond reputeMarioMaster has a reputation beyond repute
Send a message via AIM to MarioMaster
Default Re: Looking for someone to laser cut a logo

If you're sure you want cutout and not just raster etching then have Tesla do it then. My machine has been offline for a while so I took the cooling system down to prevent gunk from building up in the laser tube.
__________________
ILT 5500KR krypton only air cooled ion 100mW 647.1nm | ILT 5500AR argon only air cooled ion >300mW multiline
Omnichrome 643 air cooled Ar/Kr ion 10mW 676.4nm 647.1nm 568.2nm 488nm 476.2nm (high hours)
Spectra Physics 127 >30mW 632.8nm HeNe | Uniphase 1.5mW 543.5nm GreeNe
Coherent Innova 90 argon ion water cooled ??W (got plasma, alignment in progress)
Coherent 60W 830nm water cooled diode brick | Shenhui Laser 40W 10600nm water cooled CO2

(9:03:50 PM) Picasso: the best guys i saw ever at burning man was two dudes dressed as all green army men shooting pants at naked guys
MarioMaster is online now   Reply With Quote
Old 03-28-2012, 12:48 PM #12
mikesnap99's Avatar
Class 1 Laser
 
Join Date: Nov 2011
Posts: 79
Rep Power: 10
mikesnap99 is a jewel in the roughmikesnap99 is a jewel in the roughmikesnap99 is a jewel in the roughmikesnap99 is a jewel in the rough
mikesnap99 mikesnap99 is offline
Class 1 Laser
mikesnap99's Avatar
 
Join Date: Nov 2011
Posts: 79
Rep Power: 10
mikesnap99 is a jewel in the roughmikesnap99 is a jewel in the roughmikesnap99 is a jewel in the roughmikesnap99 is a jewel in the rough
Default Re: Looking for someone to laser cut a logo

@theteslawarrior thank you my good sir! I'll take you up on that offer. Ya .125" will work perfect! So just a rectangular piece with the logo cut out in the middle. Just hit me up with the total cost. Thanks!

Mike
__________________
~1.9Watt: 445nm Elite Aurora C6, Xdrive at 1.76A
200mW: O-Like Newstyle Red
50mW: O-Like PowerRock Waterproof and Focusable
100mW: DIY 405nm Lab

COMING SOON: GGW 6x B50 host!

REVIEW AND BUILD PAGES:

445nm:

http://************.com/showthread.p...-with-a-Xdrive

405nm:

http://************.com/showthread.p...ld-Finished%21

532nm

http://************.com/showthread.p...=1585#post1585
mikesnap99 is offline   Reply With Quote
Old 03-29-2012, 02:53 AM #13
TheTeslaWarrior's Avatar
Class 2 Laser
 
Join Date: Aug 2009
Location: California, us
Posts: 404
Rep Power: 60
TheTeslaWarrior has a reputation beyond reputeTheTeslaWarrior has a reputation beyond reputeTheTeslaWarrior has a reputation beyond reputeTheTeslaWarrior has a reputation beyond reputeTheTeslaWarrior has a reputation beyond reputeTheTeslaWarrior has a reputation beyond reputeTheTeslaWarrior has a reputation beyond reputeTheTeslaWarrior has a reputation beyond reputeTheTeslaWarrior has a reputation beyond reputeTheTeslaWarrior has a reputation beyond reputeTheTeslaWarrior has a reputation beyond repute
TheTeslaWarrior TheTeslaWarrior is offline
Class 2 Laser
TheTeslaWarrior's Avatar
 
Join Date: Aug 2009
Location: California, us
Posts: 404
Rep Power: 60
TheTeslaWarrior has a reputation beyond reputeTheTeslaWarrior has a reputation beyond reputeTheTeslaWarrior has a reputation beyond reputeTheTeslaWarrior has a reputation beyond reputeTheTeslaWarrior has a reputation beyond reputeTheTeslaWarrior has a reputation beyond reputeTheTeslaWarrior has a reputation beyond reputeTheTeslaWarrior has a reputation beyond reputeTheTeslaWarrior has a reputation beyond reputeTheTeslaWarrior has a reputation beyond reputeTheTeslaWarrior has a reputation beyond repute
Default Re: Looking for someone to laser cut a logo

Hey,

Are these what you were looking for?



I have plenty more acrylic if they aren't what you wanted.
__________________
my wavelengths:

http://laserpointerforums.com/f43/un...0-a-56708.html
TheTeslaWarrior is offline   Reply With Quote
Old 03-29-2012, 03:41 AM #14
mikesnap99's Avatar
Class 1 Laser
 
Join Date: Nov 2011
Posts: 79
Rep Power: 10
mikesnap99 is a jewel in the roughmikesnap99 is a jewel in the roughmikesnap99 is a jewel in the roughmikesnap99 is a jewel in the rough
mikesnap99 mikesnap99 is offline
Class 1 Laser
mikesnap99's Avatar
 
Join Date: Nov 2011
Posts: 79
Rep Power: 10
mikesnap99 is a jewel in the roughmikesnap99 is a jewel in the roughmikesnap99 is a jewel in the roughmikesnap99 is a jewel in the rough
Default Re: Looking for someone to laser cut a logo

Oh my god! That's perfect! Thank you so much. Just pm me a PayPal bill and I'll gladly pay for shipping (and ect). Thanks again

Mike
__________________
~1.9Watt: 445nm Elite Aurora C6, Xdrive at 1.76A
200mW: O-Like Newstyle Red
50mW: O-Like PowerRock Waterproof and Focusable
100mW: DIY 405nm Lab

COMING SOON: GGW 6x B50 host!

REVIEW AND BUILD PAGES:

445nm:

http://************.com/showthread.p...-with-a-Xdrive

405nm:

http://************.com/showthread.p...ld-Finished%21

532nm

http://************.com/showthread.p...=1585#post1585
mikesnap99 is offline   Reply With Quote
Reply





Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

























Privacy Policy | Advertising Disclaimer | Terms of Use


 


All times are GMT. The time now is 10:59 AM.


Powered by: vBulletin
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO
Privacy Policy | Advertising Disclaimer | Terms of Use
Copyright (C) 2017 Laser Pointer Forums, LLC