Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

Looking for an LPM. any suggestions?

P

Pyro Man

0
Joined
Jun 10, 2013
Messages
52
Points
0
I am looking for a laserbee LPM and I have been looking at the 3.7W USB one but i dont exactly know if i should get a usb one or a handheld one that just flips on. Anyone have any suggestions?:thinking:
 





lasersbee

lasersbee

0
Joined
Sep 20, 2008
Messages
17,622
Points
113
That all depends on what you need.
The LaserBee 3.7W USB LPM has data logging and comes
with the EaqleEye Data logging software but does not have
an on board Display. It is powered by the USB Port of your
computer.

The new 3.1W LaserBee AX for example has an on board
5 digit display but does not include Data Logging although
it can be added. It is powered by a standard 9Volt battery
making it portable.


Jerry
 
Livinloud

Livinloud

0
Joined
Feb 21, 2013
Messages
5,013
Points
0
If you dont mind a lightly used LPM (both LaserBee) then let me know and i can get you links to them. one is a LaserBee 2.5W USB and the other is a LaserBee I running on Ellipsis (Trevor is selling this one as well as servicing it down the road since Jerry wont touch it due to the changed programing which makes sense so this is not a knock on Jerry)

Like Jerry said, it all depends on what your needs are. Any LPM is going to be a good one but deciding on one is the hard part :D

Also keep in mind how powerful your lasers are. No point in buying a 3.7W if you dont have any lasers close to 3.7W or dont plan on getting one anytime soon.
 
lasersbee

lasersbee

0
Joined
Sep 20, 2008
Messages
17,622
Points
113
Livinloud said:
If you dont mind a lightly used LPM (both LaserBee) then let me know and i can get you links to them. one is a LaserBee 2.5W USB and the other is a LaserBee I running on Ellipsis (Trevor is selling this one as well as servicing it down the road since Jerry wont touch it due to the changed programing which makes sense so this is not a knock on Jerry)

Like Jerry said, it all depends on what your needs are. Any LPM is going to be a good one but deciding on one is the hard part :D

Also keep in mind how powerful your lasers are. No point in buying a 3.7W if you dont have any lasers close to 3.7W or dont plan on getting one anytime soon.
Click to expand...

Any well taken care of Used LaserBee LPM is also a good choice
if you don't want a new product or finances are tight.

But I would stay far far away from the 1W LaserBee I that Trevor
is trying to sell. It is no longer a LaserBee I since it was tampered
with and could very well have a defective ADC since I was just
made aware by Trevor that his LaserBee I exhibits jitter in the
readings.
A New LaserBee does not exhibit stable reading jitter.

That 1W LaserBee I also has a burnt Thermopile according to
Trevor and the LPM hasn't been calibrated in 4 years.

That's just a heads up to new members. If you want to buy it
then go for it but we will not service it under any circumstances.:cryyy:


Jerry
 
Last edited:
Trevor

Trevor

0
Joined
Jul 17, 2009
Messages
4,386
Points
113
I'm going to recalibrate it soon, against a NIST-traceable LPM. :)

Trevor
 
ped

ped

0
Joined
Nov 25, 2008
Messages
4,889
Points
113
Oh god, here we go.

bite.gif
 
Last edited:
P

Pyro Man

0
Joined
Jun 10, 2013
Messages
52
Points
0
But i need one higher or at 3w cause i will be building a 3w laser sometime soon but not very soon.
 
P

Pyro Man

0
Joined
Jun 10, 2013
Messages
52
Points
0
Well i will need a 3w lpm because i will make a 3w laser sometime soon and and i dont care bout response so i will either get the 3.7w usb lpm or the 3.1w laserbee AX model now i just need to decide if the extra 500mw will matter.
 
ARG

ARG

0
Joined
Feb 27, 2011
Messages
6,772
Points
113
Go for the AX, IMO.

You can add data logging to the AX easily for under 20$, it's hard to add a screen to the 3.7W USB.
Also I think the case on the 3.7W is rather ugly.

Edit: If you have a bit more to spend, go the DIY route with an Ophir head.
 
Last edited:
P

Pyro Man

0
Joined
Jun 10, 2013
Messages
52
Points
0
Omg i just cant make my mind ugg which one would you guys get 3.1w with a screen or a 3.7w usb. Will be ordering one in a couple days.
 
ARG

ARG

0
Joined
Feb 27, 2011
Messages
6,772
Points
113
As I said, datalogging can be added to the 3.1W for around 20$ if you DIY it :p
Can't easily add a screen to the 3.7W.
Also, if you're using (or plan to use) Windows 7, don't go with the 3.7W as the software is buggy and crashes all the time in Windows 7.
 
You must log in or register to reply here.




Top