Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

Laser in mirror burned it's own diode out?

Joined
Jul 18, 2013
Messages
12
Points
0
So I was playing with my great little 300mw red laser off ebay. Of course then I had to point it in a mirror and try to align the beams. The moment I did the diode went down to a faint glow.

Did I kill it?
 





Joined
Dec 11, 2015
Messages
1,628
Points
113
So I was playing with my great little 300mw red laser off ebay. Of course then I had to point it in a mirror and try to align the beams. The moment I did the diode went down to a faint glow.

Did I kill it?

I've actually heard on the forums of people killing their lasers this way and it seems to be more common that I would've thought. Are your batteries fully charged? If so then you probably have an LED'd laser diode.
 
Joined
Jul 18, 2013
Messages
12
Points
0
Yep battery is good tried 2nd. So it actually lasers again in a mirror amplifying itself into near instant overload being the radiation can't escape.
Good thing I didn't make a black hole.
 
Joined
Jul 18, 2013
Messages
12
Points
0
Joking aside it raises a question I though about. Why can't even weak 5mw lasers be focused into a small enough spot to burn things?
 

diachi

0
Joined
Feb 22, 2008
Messages
9,700
Points
113
Joking aside it raises a question I though about. Why can't even weak 5mw lasers be focused into a small enough spot to burn things?

There's a limit to how small a beam at a given wavelength can be focused. It's called the diffraction limit.

It's catastrophic optical damage (COD). It is dead.
This is why you need anti-reflective-coated lenses for high power, and it's always a good idea to point the laser at a slight angle when going through additional lenses, windows, or other optics.

This^^
 
Joined
Jan 12, 2008
Messages
3,290
Points
83
giphy.gif
 
  • Like
Reactions: Sta
Joined
Jan 29, 2014
Messages
12,031
Points
113
Why would you shoot the output of a laser beam directly back into the diode using a mirror? I have had diodes fail just from using of of those small little line producing lenses, due to having too much reflect back into the diode, much less a mirror putting most of the power back into the diode.
 
Joined
Jan 29, 2014
Messages
12,031
Points
113
Maybe not re-focus but will return power back into the diode and if over-driven to begin with, as we like to do for our pointer laser diodes, is bad news to add more heat back into the diode.
 

Radim

0
Joined
Aug 17, 2016
Messages
1,458
Points
83
Yea. That would've sucked for all of us. Pun intended

If the black hole was significantly smaller than lets say proton - what is likely when considerling general laser power, it would just fall through the Earth to the core and stayed there as it could not swallow probably anything. Anyway with this size it would just evaporate very quickly due to to Hawking's radiation before anything could fall into it, probably even faster that its fall inside the Earth's core :) The size of black hole of mass (or energy - remember E=mc^2 where c is just constant) of Earth would be of diameter about 18 mm. So, consider energy of the laser...

So, no worries when playing with lasers and mirrors that you will not destroy Earth. :)

Just saying.
 




Top