Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

High Powered Lasers

Joined
Sep 2, 2012
Messages
16
Points
0
Hey all, relatively new here to the laser world..I recently got a 200mw 405 nm laser and I loved it! So going further....any good lasers out there you would recommend? I don't have that much of budget so I'd prefer cheaper ones...


I saw some stuff on 5w lasers for 150 bucks on ebay...is it legal?:drool:

Thanks

Jason:
 





DrSid

0
Joined
Jul 17, 2010
Messages
1,506
Points
48
It might be legal, but it's not legit. 5W laser won't cost $150. For that money you can get 300mW reasonable quality green or 1-2W 445nm if you build it yourself. Greens are simply expansive. But you buy green for nice beam, not for burning .. and for that 200mW would be enough. For serious burning (and serious safety concerns) go for 445nm.
 
Joined
Aug 25, 2012
Messages
38
Points
0
There are some good links and threads about USA laser laws. From what I've seen, and please don't take this as gospel, is that you're in the clear as long as you aren't aiming it at people, vehicles, or aircraft, you aren't putting on any laser shows with unapproved lasers, and that you aren't in the vicinity of an airport. That's really the biggest one (beyond lasing people) because any beam sightings are likely to be reported, and the fines can be quite hefty if you get caught. Owning and using (responsibly) is not in itself a crime, although there are tight restrictions on the importing of complete lasers.

As for what to get next, thats up to you and what you want to do. A lot of folks like to build up a full spectrum, some are star gazing, others are pyros or have legitimate burning/etching needs. I would definitely stay away from eBay though unless other folks have vetted the seller - you usually just don't know what you're actually going to get.

And "cheap" is very relative - a 500mw blue is going to be much cheaper than a 500mw green. DIY is the cheapest way to go, but there are also a lot of almost finished kits that bring the price down. If you can solder, I recommend looking at guys like DTR and jayrob for kits, if not keep your eyes on the buy/sell lists for what fits your budget and your wants. Someone like Blord would probably be able to work with you to get something pseudo-custom for a reasonable price.

Good luck, have fun, and be safe!
 




Top