Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

Help!!

Misanthrop

Misanthrop

0
Joined
Aug 26, 2011
Messages
647
Points
0
Okay I recieved this laser today (for parts or not working... "Laser light is dim") but I intend to fix it but I've never seen this set up on a labby so I'm really confused.

Above AC AC there are two screws for an obvious power supply to be connected to... but there isn't an on switch.. unless it just goes on automatically when you connect it up?

What sort of power cable will I need etc etc pleas help.



There's nothing else on the sides or the backs of the PSU/driver.





It says DC 12V 12.5A on it, but there doesnt seem to be a connection for it anywhere!






Edit: Sorry for DOUBLE THREAD??? don't even know how i did it??


Admin please delete one thread.
 
Last edited:





Misanthrop

Misanthrop

0
Joined
Aug 26, 2011
Messages
647
Points
0
Cyparagon said:
It's a CNI head for sure... More angles on the power supply, please.



Try it.
Click to expand...


Pics in a sec..


..and I can't try it because I have nothing to connect to the mains with it.. unless there was something I could use as a substitute but still safe of course.
 
Misanthrop

Misanthrop

0
Joined
Aug 26, 2011
Messages
647
Points
0
For all those that want to see it that don't know.. this is the inside of a module..

 
Cyparagon

Cyparagon

0
Joined
Sep 12, 2007
Messages
9,399
Points
113
Surely you have several of these you're not using

Qk0JjI1DtQFKJn9Qd7YbK61WBIrlNIP2oIMlMbsw9DXaeFqn-98qUoFprRoDeS6AkhvH53UaWbomKMWuEkdE9uojd79W0Dxkjmkg0jYwG1GQvB56t3N2DUVlZ3uk7O4HgFTLoFhS2tXa4F0to8MoHqgOY20


strip the ends opposite to the outlet plug, and insert them into the appropriate screw terminals.

It may require modulation input to lase. Look for a wire pair or anything indicating it might be for an input signal. Perhaps the green terminal in the fourth picture?
 
Last edited:
Misanthrop

Misanthrop

0
Joined
Aug 26, 2011
Messages
647
Points
0
Cyparagon said:
Surely you have several of these you're not using

Qk0JjI1DtQFKJn9Qd7YbK61WBIrlNIP2oIMlMbsw9DXaeFqn-98qUoFprRoDeS6AkhvH53UaWbomKMWuEkdE9uojd79W0Dxkjmkg0jYwG1GQvB56t3N2DUVlZ3uk7O4HgFTLoFhS2tXa4F0to8MoHqgOY20


strip the ends opposite to the outlet plug, and insert them into the appropriate screw terminals.

It may require modulation input to lase. Look for a wire pair or anything indicating it might be for an input signal. Perhaps the green terminal in the fourth picture?
Click to expand...

So strip the head with 3 holes in it?
 
Ghostchrome

Ghostchrome

0
Joined
Aug 14, 2011
Messages
1,109
Points
0
Yes, unless you've got some fancy reverse wall plug the rest of us don't know about :p
 
Misanthrop

Misanthrop

0
Joined
Aug 26, 2011
Messages
647
Points
0
Can someone also tell me please which wires go to what part of the AC AC part.

FG is ground I know..

If you look at the picture with the front part facing you does the blue go on the left and the brown on the right or vice versa?
 
Misanthrop

Misanthrop

0
Joined
Aug 26, 2011
Messages
647
Points
0
Cyparagon said:
Surely you have several of these you're not using

Qk0JjI1DtQFKJn9Qd7YbK61WBIrlNIP2oIMlMbsw9DXaeFqn-98qUoFprRoDeS6AkhvH53UaWbomKMWuEkdE9uojd79W0Dxkjmkg0jYwG1GQvB56t3N2DUVlZ3uk7O4HgFTLoFhS2tXa4F0to8MoHqgOY20


strip the ends opposite to the outlet plug, and insert them into the appropriate screw terminals.

It may require modulation input to lase. Look for a wire pair or anything indicating it might be for an input signal. Perhaps the green terminal in the fourth picture?
Click to expand...


What would I do with that input bit to make it lase, because at the moment there isn't a weak light when I turn it on.
 
You must log in or register to reply here.




Top