Old 10-18-2011, 03:49 AM #1
Class 1M Laser
 
Join Date: May 2011
Posts: 140
Rep Power: 13
arcaneinsomniac is a name known to allarcaneinsomniac is a name known to allarcaneinsomniac is a name known to allarcaneinsomniac is a name known to allarcaneinsomniac is a name known to allarcaneinsomniac is a name known to all
arcaneinsomniac arcaneinsomniac is offline
Class 1M Laser
 
Join Date: May 2011
Posts: 140
Rep Power: 13
arcaneinsomniac is a name known to allarcaneinsomniac is a name known to allarcaneinsomniac is a name known to allarcaneinsomniac is a name known to allarcaneinsomniac is a name known to allarcaneinsomniac is a name known to all
Default Has anybody built a heatsink for this host?

Here's the host:

Sky Ray G6

Manafont.com | $21.2 Sky Ray G6 Cree R5 5-Mode Stainless Steel LED Flashlight (1*18650)

Found an image:



I think it's pretty good lookin' but haven't found anybody mentioning it around here. I think it would be a sweet laser host. I don't have the equipment or expertise to attempt this but I think somebody should look into it.

I am ordering one of these from Manafont right now.


__________________
When setting up LFI make sure you check the "Laser On" Option to turn on the signal!! This took me forever to figure out.
M-140 445nm@ 1800mA in L2X body (I have both a 2x18650 and 1x18650 L2X tubes that I drive with either 2x18650 or 2xIMR18350) with G2 LFL lens
Mitsubishi "500mW" 638nm @ 1400mA in Solarforce P1D Grey, beautiful custom Copper heatsink in a waterproof configuration and with a G2 lens You have outdone yourself Flaminpyro!
M-140 445nm @ 1800mA Lazeerer X-Drive 2x14430 host thanks Ehgemus
Crooked 500mW O-Like Crown 532nm thanks Susie (but damnit, it's mounted crooked)
Mitsubishi "300mW" 638nm @ 775mA in Solarforce L2T Waterproof
A-140 445nm @ 1500mA flexdrive, Aixiz 445 lens in Solarforce L2P Waterproof thanks Jayrob
BDR-S06J @475mA L2P thanks Flaminpyro
LPC-826 in Aurora SH-032 Stainless @417mA
PHR-803T @ 85mA

Last edited by arcaneinsomniac; 10-18-2011 at 03:52 AM.
arcaneinsomniac is offline   Reply With Quote


















Old 10-18-2011, 03:53 AM #2
blakegriffin's Avatar
Class 2 Laser
 
Join Date: Aug 2011
Location: Los Angeles, CA
Posts: 255
Rep Power: 9
blakegriffin will become famous soon enough
blakegriffin blakegriffin is offline
Class 2 Laser
blakegriffin's Avatar
 
Join Date: Aug 2011
Location: Los Angeles, CA
Posts: 255
Rep Power: 9
blakegriffin will become famous soon enough
Default Re: Has anybody built a heatsink for this host?

You can pm jayrob to make a costome heatsink for that host.
__________________
10mw laser
1,000mw laser bulid
1.9-2 watt 445nm laser (kinda broke I think something wrong with the connection)
5mw green laser
800mw laser
450mw 635nm laser
5mw red laser pen
Radient electronics 2 watt lpm
blakegriffin is offline   Reply With Quote
Old 10-18-2011, 03:55 AM #3
Class 1M Laser
 
Join Date: May 2011
Posts: 140
Rep Power: 13
arcaneinsomniac is a name known to allarcaneinsomniac is a name known to allarcaneinsomniac is a name known to allarcaneinsomniac is a name known to allarcaneinsomniac is a name known to allarcaneinsomniac is a name known to all
arcaneinsomniac arcaneinsomniac is offline
Class 1M Laser
 
Join Date: May 2011
Posts: 140
Rep Power: 13
arcaneinsomniac is a name known to allarcaneinsomniac is a name known to allarcaneinsomniac is a name known to allarcaneinsomniac is a name known to allarcaneinsomniac is a name known to allarcaneinsomniac is a name known to all
Default Re: Has anybody built a heatsink for this host?

I'll surely talk with him about it.

Do you not agree that it is one sweet looking host?
__________________
When setting up LFI make sure you check the "Laser On" Option to turn on the signal!! This took me forever to figure out.
M-140 445nm@ 1800mA in L2X body (I have both a 2x18650 and 1x18650 L2X tubes that I drive with either 2x18650 or 2xIMR18350) with G2 LFL lens
Mitsubishi "500mW" 638nm @ 1400mA in Solarforce P1D Grey, beautiful custom Copper heatsink in a waterproof configuration and with a G2 lens You have outdone yourself Flaminpyro!
M-140 445nm @ 1800mA Lazeerer X-Drive 2x14430 host thanks Ehgemus
Crooked 500mW O-Like Crown 532nm thanks Susie (but damnit, it's mounted crooked)
Mitsubishi "300mW" 638nm @ 775mA in Solarforce L2T Waterproof
A-140 445nm @ 1500mA flexdrive, Aixiz 445 lens in Solarforce L2P Waterproof thanks Jayrob
BDR-S06J @475mA L2P thanks Flaminpyro
LPC-826 in Aurora SH-032 Stainless @417mA
PHR-803T @ 85mA

Last edited by arcaneinsomniac; 10-18-2011 at 03:56 AM.
arcaneinsomniac is offline   Reply With Quote
Old 10-18-2011, 04:55 AM #4
blakegriffin's Avatar
Class 2 Laser
 
Join Date: Aug 2011
Location: Los Angeles, CA
Posts: 255
Rep Power: 9
blakegriffin will become famous soon enough
blakegriffin blakegriffin is offline
Class 2 Laser
blakegriffin's Avatar
 
Join Date: Aug 2011
Location: Los Angeles, CA
Posts: 255
Rep Power: 9
blakegriffin will become famous soon enough
Default Re: Has anybody built a heatsink for this host?

I do think it looks awesome I am not sure what color would lok good in it. If I were to use that host in my next build which will be in like a half a year I would probably make a 12x violet laser or I would just put in like a 50-100mw green laser module.
__________________
10mw laser
1,000mw laser bulid
1.9-2 watt 445nm laser (kinda broke I think something wrong with the connection)
5mw green laser
800mw laser
450mw 635nm laser
5mw red laser pen
Radient electronics 2 watt lpm
blakegriffin is offline   Reply With Quote
Old 10-20-2011, 06:15 AM #5
Synchros's Avatar
Class 1 Laser
 
Join Date: Oct 2011
Location: Witch's Tit, Minnesota
Posts: 76
Rep Power: 7
Synchros is on a distinguished road
Synchros Synchros is offline
Class 1 Laser
Synchros's Avatar
 
Join Date: Oct 2011
Location: Witch's Tit, Minnesota
Posts: 76
Rep Power: 7
Synchros is on a distinguished road
Default Re: Has anybody built a heatsink for this host?

That would be a beautiful host! Simple and streamlined. 405 would be great coming out of that baby, but any color would be fine.
Synchros is offline   Reply With Quote
Old 10-20-2011, 06:18 AM #6
rhd's Avatar
rhd rhd is offline
Class 4 Laser
 
Join Date: Dec 2010
Posts: 8,492
Rep Power: 108508
rhd has a reputation beyond reputerhd has a reputation beyond reputerhd has a reputation beyond reputerhd has a reputation beyond reputerhd has a reputation beyond reputerhd has a reputation beyond reputerhd has a reputation beyond reputerhd has a reputation beyond reputerhd has a reputation beyond reputerhd has a reputation beyond reputerhd has a reputation beyond repute
rhd rhd is offline
Class 4 Laser
rhd's Avatar
 
Join Date: Dec 2010
Posts: 8,492
Rep Power: 108508
rhd has a reputation beyond reputerhd has a reputation beyond reputerhd has a reputation beyond reputerhd has a reputation beyond reputerhd has a reputation beyond reputerhd has a reputation beyond reputerhd has a reputation beyond reputerhd has a reputation beyond reputerhd has a reputation beyond reputerhd has a reputation beyond reputerhd has a reputation beyond repute
Default Re: Has anybody built a heatsink for this host?

I have

I've taken to calling it the "Ribbed Silver Senior"

It fits SH-032 and TR-801 heatsinks perfectly.

Attached Thumbnails
Has anybody built a heatsink for this host?-img_5123.jpg  
__________________
CURRENT WAVELENGTHS:
405|441|450|467|473|495|505|520|532|556|PGLRG|589|594|632|638|660


SAFETY & IMPORTANT READING (threads authored and contributed to by various members of LPF):
- Federal Aviation Administration - Laser Safety Initiative (link)
- Info release from Laserglow - Default Canadian restrictions on portable lasers (link)
- The Necessity of Safety Goggles (link)


Last edited by rhd; 10-20-2011 at 06:19 AM.
rhd is offline   Reply With Quote
Old 10-20-2011, 07:53 PM #7
Class 1M Laser
 
Join Date: May 2011
Posts: 140
Rep Power: 13
arcaneinsomniac is a name known to allarcaneinsomniac is a name known to allarcaneinsomniac is a name known to allarcaneinsomniac is a name known to allarcaneinsomniac is a name known to allarcaneinsomniac is a name known to all
arcaneinsomniac arcaneinsomniac is offline
Class 1M Laser
 
Join Date: May 2011
Posts: 140
Rep Power: 13
arcaneinsomniac is a name known to allarcaneinsomniac is a name known to allarcaneinsomniac is a name known to allarcaneinsomniac is a name known to allarcaneinsomniac is a name known to allarcaneinsomniac is a name known to all
Default Re: Has anybody built a heatsink for this host?

Quote:
Originally Posted by rhd View Post
It fits SH-032 and TR-801 heatsinks perfectly.
Now that's what I've been hoping to hear!

Sweet!
__________________
When setting up LFI make sure you check the "Laser On" Option to turn on the signal!! This took me forever to figure out.
M-140 445nm@ 1800mA in L2X body (I have both a 2x18650 and 1x18650 L2X tubes that I drive with either 2x18650 or 2xIMR18350) with G2 LFL lens
Mitsubishi "500mW" 638nm @ 1400mA in Solarforce P1D Grey, beautiful custom Copper heatsink in a waterproof configuration and with a G2 lens You have outdone yourself Flaminpyro!
M-140 445nm @ 1800mA Lazeerer X-Drive 2x14430 host thanks Ehgemus
Crooked 500mW O-Like Crown 532nm thanks Susie (but damnit, it's mounted crooked)
Mitsubishi "300mW" 638nm @ 775mA in Solarforce L2T Waterproof
A-140 445nm @ 1500mA flexdrive, Aixiz 445 lens in Solarforce L2P Waterproof thanks Jayrob
BDR-S06J @475mA L2P thanks Flaminpyro
LPC-826 in Aurora SH-032 Stainless @417mA
PHR-803T @ 85mA
arcaneinsomniac is offline   Reply With Quote
Old 10-21-2011, 12:44 AM #8
madog's Avatar
Class 2M Laser
 
Join Date: May 2010
Location: ohio
Posts: 530
Rep Power: 25
madog has much to be proud ofmadog has much to be proud ofmadog has much to be proud ofmadog has much to be proud ofmadog has much to be proud ofmadog has much to be proud ofmadog has much to be proud ofmadog has much to be proud ofmadog has much to be proud ofmadog has much to be proud of
madog madog is offline
Class 2M Laser
madog's Avatar
 
Join Date: May 2010
Location: ohio
Posts: 530
Rep Power: 25
madog has much to be proud ofmadog has much to be proud ofmadog has much to be proud ofmadog has much to be proud ofmadog has much to be proud ofmadog has much to be proud ofmadog has much to be proud ofmadog has much to be proud ofmadog has much to be proud ofmadog has much to be proud of
Default Re: Has anybody built a heatsink for this host?

Why am I not surprised?
Between you, DTR, and wannaburn, we have been seeing some good ole homecookin' recently.
Keep up the good work!
Quote:
Originally Posted by rhd View Post
I have

I've taken to calling it the "Ribbed Silver Senior"

It fits SH-032 and TR-801 heatsinks perfectly.

__________________
635nm 800mw in a Cree C3 w/mosquito thanks RHD
635nm 300mw labby

600mw JetL PL-C 880mw Peak Thanks Hak and Gray
445nm 1550mw Wolf800 Thanks Flaminpyro
405nm 600mw in a Cree C3 Thanks Daguin
Plus a handful of miscellaneous cheapy handhelds
madog is offline   Reply With Quote
Old 11-13-2011, 09:21 PM #9
Class 1M Laser
 
Join Date: May 2011
Posts: 140
Rep Power: 13
arcaneinsomniac is a name known to allarcaneinsomniac is a name known to allarcaneinsomniac is a name known to allarcaneinsomniac is a name known to allarcaneinsomniac is a name known to allarcaneinsomniac is a name known to all
arcaneinsomniac arcaneinsomniac is offline
Class 1M Laser
 
Join Date: May 2011
Posts: 140
Rep Power: 13
arcaneinsomniac is a name known to allarcaneinsomniac is a name known to allarcaneinsomniac is a name known to allarcaneinsomniac is a name known to allarcaneinsomniac is a name known to allarcaneinsomniac is a name known to all
Default Re: Has anybody built a heatsink for this host?

I got this host in the mail from Manafont today. It's very good quality. Minimalistic footprint for fitting an 18650. Much more attractive than the SH-032 IMO. It also tailstands great because the button does not protrude slightly like my SH-032 does.

Mine came with (I think) a Cree XP-G, so it's quite a nice flashlight (though it could be better without the flashy modes)...

What's interesting is it does not have a screw off tailcap. The clicky is mounted on a pill which screws into the back of the "body" piece.

The primary o-ring seems to fit pretty snug. I think with a bit of lubing and making sure everything's tight, it will be very waterproof.

Edit: I am pretty sure that this particular unit I got does not have any memory. So you will always need to deal with the blinky modes. This is obviously a flashlight dealbreaker so I imagine I'll swap my sh-032 build into this host. Will post back with results and pictures.
__________________
When setting up LFI make sure you check the "Laser On" Option to turn on the signal!! This took me forever to figure out.
M-140 445nm@ 1800mA in L2X body (I have both a 2x18650 and 1x18650 L2X tubes that I drive with either 2x18650 or 2xIMR18350) with G2 LFL lens
Mitsubishi "500mW" 638nm @ 1400mA in Solarforce P1D Grey, beautiful custom Copper heatsink in a waterproof configuration and with a G2 lens You have outdone yourself Flaminpyro!
M-140 445nm @ 1800mA Lazeerer X-Drive 2x14430 host thanks Ehgemus
Crooked 500mW O-Like Crown 532nm thanks Susie (but damnit, it's mounted crooked)
Mitsubishi "300mW" 638nm @ 775mA in Solarforce L2T Waterproof
A-140 445nm @ 1500mA flexdrive, Aixiz 445 lens in Solarforce L2P Waterproof thanks Jayrob
BDR-S06J @475mA L2P thanks Flaminpyro
LPC-826 in Aurora SH-032 Stainless @417mA
PHR-803T @ 85mA

Last edited by arcaneinsomniac; 11-18-2011 at 06:09 PM.
arcaneinsomniac is offline   Reply With Quote
Old 11-23-2012, 01:31 PM #10
Bristol's Avatar
Class 1 Laser
 
Join Date: Oct 2012
Location: Lincoln, Nebraska
Posts: 57
Rep Power: 9
Bristol is just really niceBristol is just really niceBristol is just really niceBristol is just really nice
Bristol Bristol is offline
Class 1 Laser
Bristol's Avatar
 
Join Date: Oct 2012
Location: Lincoln, Nebraska
Posts: 57
Rep Power: 9
Bristol is just really niceBristol is just really niceBristol is just really niceBristol is just really nice
Default Re: Has anybody built a heatsink for this host?

How about this one?

NEW-626A Cree XR-E Q5 300LM 3-Mode White Light Waterproof LED Flashlight - Red (1x18650 Included) - Free Shipping - DealExtreme
__________________
445nm Aurora C6
Bristol is offline   Reply With Quote
Old 11-23-2012, 02:31 PM #11
Blord's Avatar
Class 4 Laser
 
Join Date: Dec 2007
Location: Belgium
Posts: 5,368
Rep Power: 251027
Blord has a reputation beyond reputeBlord has a reputation beyond reputeBlord has a reputation beyond reputeBlord has a reputation beyond reputeBlord has a reputation beyond reputeBlord has a reputation beyond reputeBlord has a reputation beyond reputeBlord has a reputation beyond reputeBlord has a reputation beyond reputeBlord has a reputation beyond reputeBlord has a reputation beyond repute
Blord Blord is offline
Class 4 Laser
Blord's Avatar
 
Join Date: Dec 2007
Location: Belgium
Posts: 5,368
Rep Power: 251027
Blord has a reputation beyond reputeBlord has a reputation beyond reputeBlord has a reputation beyond reputeBlord has a reputation beyond reputeBlord has a reputation beyond reputeBlord has a reputation beyond reputeBlord has a reputation beyond reputeBlord has a reputation beyond reputeBlord has a reputation beyond reputeBlord has a reputation beyond reputeBlord has a reputation beyond repute
Default Re: Has anybody built a heatsink for this host?

These are the same hosts Yobresal is selling in blue color.
You better start a new thread because the old one is over a year old and your question has nothing to do with it.
__________________
405nm 400mW S06J C6
445nm 3W Big Boy, 2.8W Dominator, 2.4W Steel Laser
450nm 240mW PL450 C6
473nm 100mW PGL-III-C-473
520nm 55mW Skylaser PL520
532nm 821mW Skylaser PL532, 133mW Jetlasers Ti-B
589nm 100mW PGL-III-C-589
635nm 70mW Sanyo SenTorch
638nm 175mW Ehgemus, 1W Rook
660nm 1216mW Skylaser PL660, 263mW LPC826 C6
685nm 33mW Fujitsu FLD6A2TK C6
780nm 150mW Dilda
808nm 640mW C6

I have copper 501B and Dominator lasers for sale !

Last edited by Blord; 11-23-2012 at 02:33 PM.
Blord is offline   Reply With Quote
Reply





Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



























Privacy Policy | Advertising Disclaimer | Terms of Use


 


All times are GMT. The time now is 12:26 PM.


Powered by: vBulletin
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO
Privacy Policy | Advertising Disclaimer | Terms of Use
Copyright (C) 2017 Laser Pointer Forums, LLC