A fun little thing...

Well, I have a "200mW" o-like that I think actually puts out about 30-50mW less, a 100mW BR, and a 50mW IR and green. On the way is a 245mW red. These are all my active lasers, I have a few diodes. So about 555mW or .555 watt.

will

Woodofcville said:

You mean like... Was the engraving unit used for making those crystal cubes like in my profile pic? <<

Click to expand...

It was used to engrave/etch glass and stone

I've got about 70W. 60.4W is IR though. 4 are class 4.

60 watt co2 and 100mw 473nm

Uhm ..... hard to say, cause some of my old units are not working (no PSU, like the 50mW He-Ne or the 8W UV HG unit) ..... and also, i think i have around some units that i don't literally know where the hell i put them, in all these years .....

Counting only solid state working ones, labby, modules, c-mounts and handhelds, regardless from the wavelenghts, i think approximatively 10 or 11 W ..... but if you want to add all the gas ones, and the SSY1, is a different thing :eg:

Woodofcville said:

Was the engraving unit used for making those crystal cubes like in my profile pic? <<

Click to expand...

Not clear from the pic, anyway ..... is that one of those acrylate cubes with a 3D object engraved inside them ?

If yes, for make them, is used a far-focused scanner engraver ..... is a setup that use a green or IR (depend from the type of material that they need to engrave) beam, focused on a single point from a large source, so the light can pass inside the acrylate unfocused (not affecting the material), and change the transparency properties only in the focused point, that become "scanned" in 3D pattern for "print" the object shape inside.

I had some link of these machines at work saved somewhere, if i reach to find them, i post them.

EDIT: these ones

http://www.youtube.com/watch?v=HPZ0oiIoc8E
http://www.youtube.com/watch?v=2xAVxsWD1PM
http://www.youtube.com/watch?v=EUpkZxisWzo
http://www.youtube.com/watch?v=cZLd5g3pPvI
http://www.youtube.com/watch?v=KHvS6C_gY4Q

I don't have many lasers, so about 885mW, only visible light

I have 591mW

PHR-803T build = 110mw
Green O-like build = 171mW
DX green 100mW = 60mW?
DX Red 200mW = 200mW
Argon (coming) = 320-52mW

I have approximatly 1.23 watts - most of which get spat out of the green 1 watt lab CNI module. The other two comprise the 150mw green lab and the argon laser. Its probably more as CNI's are known to be overspec. I'll measure all my powers when I've saved the cash for a kenometer pro.

I have to update my Sig a little, alot more to be put in.

But all in total, about 4.2w, and lots of $$$

I have a woppin 205 mw. Lol. I am new to the whole laser thing. So stuff you guys do everyday still fascinates me. I am getting more lasers though.

225mw of green when I fix my 75mw pen
(maybe more, CNI pens = overspec mostly?).

5W Millennia
5W Millennia
2W Millennia
5W Verdi
10W Verdi
200mW Sapphire
20mW Sapphire
19mW HeNe
5mW HeNe
2.3mW HeNe
1mW HeNe
1.8mW GreNe
1.2mW GreNe
10W CO2
250mW Portable
120mW Portable
20mW Portable
5mW Portable
25W Surgical
13W Diode
13W Diode
13W Diode
13W Diode
13W Diode
13W Diode

130.6453W

Not counting the 40W diodes, which I have boxes and boxes of.

^holy s**t^

2W 973nm C-mount
3x phr (<300mW total)
GGW (<200mW)
LCC (~200mW)
2x 50mW green's
30x HeNe's ( prob 200mW total)


About 3 W total

I don't have enough fingers & toes & I can't find my calculator-------- rob PS, I'd be curious to know daguin's total wattage, WOW!!!!!!

phoenix77 said:

I don't have enough fingers & toes & I can't find my calculator-------- rob PS, I'd be curious to know daguin's total wattage, WOW!!!!!!

Click to expand...

Over nine thousand!!!