Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

Can static electricity kill a laser pointer?

Joined
Nov 2, 2010
Messages
165
Points
28
Hello guys.

I have a question about static electricity. Let's say I have one of my pointers (I have a couple of Arctics as well as a few Lazerer units, and a couple of home made units on flashlight hosts) on a table, and I pick it up, and I just happen to have static electricity, which discharges from my hand onto the host of the laser.

Is there a possibility to damage the laser if this occurs? I'm curious because most hosts use the body of the host itself to connect the negative terminal of the battery to the laser diode itself, and I was wondering if there was possibility for static charge to go up into the diode this way and kill it?
 





Joined
May 25, 2013
Messages
534
Points
28
Wonder if it would be more prone to damage on dpss lasers with case positive etc?
 
Joined
Dec 29, 2009
Messages
3,136
Points
63
There are devices you can retrofit to make your laser diode impervious to static. You can buy a Lasorb, you can also make your own protection circuitry. Just depends on how important that particular laser is to you.

Generally, the charge is trying to find its way to the Earth ground. Usually, this just involves travelling on the surface of whatever it is you zapped. Not to say that you may just be putting the body of the laser at a higher potential than the rest and that the high difference in potential wouldn't find its way through the diode. Just wanted to say if you zap your laser, don't throw it away assuming it's dead (who would do that anyways?), but try it to make sure it still works.
 
Joined
Nov 2, 2010
Messages
165
Points
28
Thanks guys. Thankfully I haven't zapped anything, but I got a serious shock when my leg hit my chair right before I was about to grab one of my lasers (I grounded myself before I grabbed it to be safe) and the question occurred to me then.

The static protection circuitry might be a good idea. I'm going to look into that.
 
Joined
Sep 12, 2007
Messages
9,399
Points
113
Can static electricity kill a laser pointer?

bare laser diodes? Definitely. Laser pointers? not a chance.

Bare diodes are susceptible because anode and cathode are electrically exposed. to damage the junction of a laser diode, you need a high potential across the junction. The case and attached circuitry present in a pointer prevents that from happening.
 
Last edited:
  • Like
Reactions: ped

Things

0
Joined
May 1, 2007
Messages
7,517
Points
0
Maybe if you had the tailcap removed, the batteries still inserted, and managed to touch the back end of the battery first, and even then it'd be a big maybe. Just picking up the laser, no chance.
 
  • Like
Reactions: ped
Joined
Nov 2, 2010
Messages
165
Points
28
Ok cool, I never keep my lasers with batteries inside. I treat them like I treat my guns, always unloaded and only loaded when in use in a safe environment :)

So yes, my lasers are built, no exposed parts, and no batteries.

So if in this condition the diode is unlikely to be damaged, could the driver circuitry be damaged instead?
 
  • Like
Reactions: ped

Things

0
Joined
May 1, 2007
Messages
7,517
Points
0
That caught me out at first too, but they mean static magnetic fields (ie, if you held a magnet to it), not static electricity.
 
Last edited:
Joined
Nov 2, 2012
Messages
626
Points
43
I've discharged static through pointer hosts and thrown sparks, never a problem. The electrons just want to jump off ASAP, there is no reason for them to travel inside the host. The electric field ensures that they collect on the outside of the host.

I keep my lasers "loaded", i.e. batteries installed, most of the time, I don't see a problem with that. The only exception is my 1W 808nm, which I never store with installed batteries, but that's a matter of eye safety rather than worrying about whether or not the laser gets fried. That one I do treat like a gun, literally, due to the inherent dangers of IR plus the high power. Nothing else in my collection currently comes close in terms of hazard.

But yeah, never killed a pointer with static, just clumsiness :)
 
Last edited:




Top