- Joined
- May 30, 2012
- Messages
- 4
- Points
- 0
Hello All! (new user)
I need to construct a laser based leveling system. The beam must produce a small dot ( max 7.0 mm / min 1.0 mm) at 150 meters. A well shaped circular spot with sharply defined edged is a plus. This laser will be used with the Pacific Sensor QP50-6-18u-SD2 position sensor (sensitivity range 400 nm - 1100 nm, peak sensitivity at 900nm) I'm guessing (you guys are the experts) that some type of lens colliminator will be required...
Thanks For Reading!
Cheers
Bill
P.S. Forgot to mention, minimum spot size sensor will accept is 1.0mm
I need to construct a laser based leveling system. The beam must produce a small dot ( max 7.0 mm / min 1.0 mm) at 150 meters. A well shaped circular spot with sharply defined edged is a plus. This laser will be used with the Pacific Sensor QP50-6-18u-SD2 position sensor (sensitivity range 400 nm - 1100 nm, peak sensitivity at 900nm) I'm guessing (you guys are the experts) that some type of lens colliminator will be required...
Thanks For Reading!
Cheers
Bill
P.S. Forgot to mention, minimum spot size sensor will accept is 1.0mm
Last edited: