diachi
0
- Joined
- Feb 22, 2008
- Messages
- 9,700
- Points
- 113
As Mario already said, the ballast resistor is just there to limit current.
The cathode end of a HeNe is the end with the " Metal can " inside it.
LPF Donation via Stripe | LPF Donation - Other Methods
Links below open in new window
ArcticMyst Security by Avery
Tube from a Heruurscience surprise box
- Thread starter Morgan
- Start date
As Mario already said, the ballast resistor is just there to limit current.
The cathode end of a HeNe is the end with the " Metal can " inside it.
- Joined
- Feb 11, 2008
- Messages
- 730
- Points
- 0
The ballast resistor is attached to the tube assembly.
Morgan
0
- Joined
- Feb 5, 2009
- Messages
- 2,174
- Points
- 0
Icecruncher - PM ignored, no worries. I did PM Heruurscience on your behalf too but that was before I read your post. Glad all is well.
Jerry - I'll have to update my profile. Probably missing the UK info since the changeover.
I feel a lot more confident to fire this thing up now.
I'm off to find a plug...
... Post imminent.....
M
Jerry - I'll have to update my profile. Probably missing the UK info since the changeover.
I feel a lot more confident to fire this thing up now.
I'm off to find a plug...
... Post imminent.....
M
diachi
0
- Joined
- Feb 22, 2008
- Messages
- 9,700
- Points
- 113
YAYYY 
Take some pics, we love pics you know
Take some pics, we love pics you know
Morgan
0
- Joined
- Feb 5, 2009
- Messages
- 2,174
- Points
- 0
First Light!
Ahh, init cute!
Beautiful, beautiful light. It is nice and bright too. Bit brighter than I was expecting and the beam looks to be very tight. All in all I am feeling VERY pleased.
Thank you Heruurscience!
This is only the preliminary setup to get it working. Now I know it does I'll have to give it a good clean up and a mount.
Now some more Qs I'm afraid:
I know HeNes can be a variety of colours. How do I determine the wavelength? (Not that it matters in the slightest right now!)
Are there any recommendations on run time and general care? I read that Argons should be run for a certain amount of time every so often.
Apologies if I disappear for the rest of the evening but I have to give my eye-balls a HeNe burn in!!!
I have such a stoopid smile on my chops!
M...
Ahh, init cute!
Beautiful, beautiful light. It is nice and bright too. Bit brighter than I was expecting and the beam looks to be very tight. All in all I am feeling VERY pleased.
Thank you Heruurscience!
This is only the preliminary setup to get it working. Now I know it does I'll have to give it a good clean up and a mount.
Now some more Qs I'm afraid:
I know HeNes can be a variety of colours. How do I determine the wavelength? (Not that it matters in the slightest right now!)
Are there any recommendations on run time and general care? I read that Argons should be run for a certain amount of time every so often.
Apologies if I disappear for the rest of the evening but I have to give my eye-balls a HeNe burn in!!!
I have such a stoopid smile on my chops!
M...
Attachments
- Joined
- Sep 20, 2008
- Messages
- 17,622
- Points
- 113
As to the color... it should be indicated in "nm" on the tube label if it has one...
if it is red similar to a red $1.00 laser pointer or a dilda (it won't be exactly the
same color but close) then it is most likely a red 632.8nm HeNe...
and as what Chris said it is 4mW... I've got a bunch of these about 14"-15" long...
they have a nice round beam dot...
Jerry
if it is red similar to a red $1.00 laser pointer or a dilda (it won't be exactly the
same color but close) then it is most likely a red 632.8nm HeNe...
and as what Chris said it is 4mW... I've got a bunch of these about 14"-15" long...
they have a nice round beam dot...
Jerry
- Joined
- Jan 2, 2008
- Messages
- 1,513
- Points
- 83
You know I'm watching this thread pretty close with 2 hene's on order.
Also, using a diffraction grating and a close known wavelength you can determine pretty close the wavelength off reflections onto a wall details are in the Sam Laser FAQs.
Last edited:
diachi
0
- Joined
- Feb 22, 2008
- Messages
- 9,700
- Points
- 113
As Jerry said, if it's red like one of those cat toy pointers then it's 632.8nm. I must say it IS a cute little thing ! I really need a HeNe ! As for running, I'm not aware that you need to run HeNe lasers every so often like you do with argon lasers. I had a huge grin when I fired up my first argon laser
Morgan
0
- Joined
- Feb 5, 2009
- Messages
- 2,174
- Points
- 0
Laserbee - No wavelength markings that I can see. There is a sticker that disappears round the back of the tube so that's probably where I'll find it. I'll have to remove the tube first. Doesn't look too much of a job either. I'll compare it with my Senkat diode, (x16 red), and report back for confirmation.
The dot is nice and round although I haven't checked it at long distance. There is also a dot coming from the other end. Less bright but just as defined. It doesn't surprise me it's there but would it have been in the original design brief? Do all gas lasers do this? Is this what they call, "Dual line"?
I SO feel like a noob right now! I've built a few diode based do-hickies now and I do know the info is out there, and where I might look for it, (Note to fellow noobs: The search button is your friend! And, "Sam's FAQs", is your bible!). I just can't help thinking aloud here! Good to share with you guys!
Icecruncher - You're gonna love 'em!!!!
Gassy dreams everyone...
M
The dot is nice and round although I haven't checked it at long distance. There is also a dot coming from the other end. Less bright but just as defined. It doesn't surprise me it's there but would it have been in the original design brief? Do all gas lasers do this? Is this what they call, "Dual line"?
I SO feel like a noob right now! I've built a few diode based do-hickies now and I do know the info is out there, and where I might look for it, (Note to fellow noobs: The search button is your friend! And, "Sam's FAQs", is your bible!). I just can't help thinking aloud here! Good to share with you guys!
Icecruncher - You're gonna love 'em!!!!
Gassy dreams everyone...
M
- Joined
- Jan 7, 2007
- Messages
- 6,309
- Points
- 83
HeNe was my first laser many years ago. They are still fun and a nice color.
Enjoy the gas !!
Mike
Enjoy the gas !!
Mike
- Joined
- Jul 27, 2007
- Messages
- 3,642
- Points
- 63
The bit of light coming out of the other end is normal - the mirrors aren't 100% perfect so a bit of light leaks out of the HR (high reflective) mirror. The OC or output coupler is designed to leak (95-97% reflective or so) which is where the main laser beam comes from.
And I believe what you were referring to as "multi line" which you find in other lasers such as argon where you can have two or more wavelengths coming out of a single laser. You can't really do this with HeNes since the lines "fight" for power and just doesn't work very well.
Morgan
0
- Joined
- Feb 5, 2009
- Messages
- 2,174
- Points
- 0
MM - Yep, I've since read a post from Daguin, (I think), where it explained, "multi-lines", better. I was barking up the wrong cul-de-sac with that one! After seeing it in the dark too, it seems the dimmer spot is not as clean as first thought. I'm loving it though!
The colour is just a shade more orange than my Senkat, (noticeably more orange than my PHR IR/Red Spirograph), so I'll happily go along with 632.8nm, (Think I remembered that figure correctly).
Nice to have a post from Mr Hemlock there too. Hello again! Last time we spoke I think it was on my, "Welcome to the forum", post. I'm still here so you didn't put me off and I'm still learning.
Gas ist gut yah?!
M
The colour is just a shade more orange than my Senkat, (noticeably more orange than my PHR IR/Red Spirograph), so I'll happily go along with 632.8nm, (Think I remembered that figure correctly).
Nice to have a post from Mr Hemlock there too. Hello again! Last time we spoke I think it was on my, "Welcome to the forum", post. I'm still here so you didn't put me off and I'm still learning.
Gas ist gut yah?!
M
- Joined
- Nov 7, 2008
- Messages
- 5,725
- Points
- 0
My first laser was also a HeNe. They are a lot of fun, and the common ones are very cheap, so that doesn't hurt. Nice find.
- Joined
- Feb 9, 2008
- Messages
- 152
- Points
- 18
Congradulations Morgan on your first HeNe!!!
I'm waiting for a tube from Laserben and a brick power supply from heruusciences to make a desktop lamp like daves. When I get that up and running I'll probably be selling my complete HeNe system.
http://www.laserpointerforums.com/laser_pointer_forums_3/forum/showthread.php?t=38668
I think it was brand new when I got it a few weeks ago, and I''ve put less than 24 hours on it. I'm pretty sure it has a beam expander built into it. Also, it was manufactured in December-about half a year ago. It is my first HeNe.
Sorry for the partial threadjack. I know the excitement you feel when you fire up your first gas laser. Good for you Morgan.
I'm waiting for a tube from Laserben and a brick power supply from heruusciences to make a desktop lamp like daves. When I get that up and running I'll probably be selling my complete HeNe system.
http://www.laserpointerforums.com/laser_pointer_forums_3/forum/showthread.php?t=38668
I think it was brand new when I got it a few weeks ago, and I''ve put less than 24 hours on it. I'm pretty sure it has a beam expander built into it. Also, it was manufactured in December-about half a year ago. It is my first HeNe.
Sorry for the partial threadjack. I know the excitement you feel when you fire up your first gas laser. Good for you Morgan.
- Joined
- Mar 31, 2009
- Messages
- 327
- Points
- 0
- Joined
- Sep 20, 2008
- Messages
- 17,622
- Points
- 113
Yeah... it's really easy... do what it says on the Power Supply in the picture...
BTW "whatsupadrian"... you're hijacking this thread...
Jerry
BTW "whatsupadrian"... you're hijacking this thread...
Jerry
