- Joined
- Aug 17, 2007
- Messages
- 238
- Points
- 0
Does anyone know a good (cheap) supplier of this stuff in small quantities? Thanks! Lowest ebay price is $27.00 which is WAY too much.
LPF Donation via Stripe | LPF Donation - Other Methods
Links below open in new window
ArcticMyst Security by Avery
Thermally Conductive Epoxy
- Thread starter photongeek
- Start date
Gazoo
0
- Joined
- Jun 9, 2007
- Messages
- 3,206
- Points
- 38
Search for Arctic Silver on ebay..... 
- Joined
- Jul 27, 2007
- Messages
- 3,642
- Points
- 63
arctic silver sells both a thermal grease and a thermal epoxy, but most stores only carry the thermal paste so you may have to order online if the epoxy is what you need.
Or you can take some superfine Al powder and mix it with JUST enough 2 part epoxy to stick. I used about 5 parts 325 mesh Al powder and one part each clear 2 hour epoxy and hardener. Works great, and cheap to make. I'm too much a tightwad to spend $20 on a tiny tube when I can spent $2 on a bunch of epoxy and another buck worth of Al powder from my thermite stash
I know it's no dielectric, but for most applications it works fine for me. YMMV but if anyone else makes some, let me know how you liked it.
I know it's no dielectric, but for most applications it works fine for me. YMMV but if anyone else makes some, let me know how you liked it.
- Joined
- Aug 17, 2007
- Messages
- 238
- Points
- 0
Thanks for the info Guys.
I have atomized aluminum powder (I use it in my art work) I can mixed into 5-min epoxy. I'll give this a try before buying the retail product.
I have atomized aluminum powder (I use it in my art work) I can mixed into 5-min epoxy. I'll give this a try before buying the retail product.
Y
yew.sir-name
Guest
Dx just got some of this stuff in, check the new arrivals pages
Benm
0
- Joined
- Aug 16, 2007
- Messages
- 7,896
- Points
- 113
Perhaps a general warning would be in place for those who want to use finely powdered alu: It's hazardoes if you breath the stuff, and larger quantities can cause nasty dust explosions if spread around and accidentely ignited.
As for the heat conducting compounds: thermal expoxy is perhaps 3 times better than regular epoxy. In comparison: aluminium is over 100 times better than the best thermal grease. Minimizing the gaps will do you much more good than using an expensive compound.
As for the heat conducting compounds: thermal expoxy is perhaps 3 times better than regular epoxy. In comparison: aluminium is over 100 times better than the best thermal grease. Minimizing the gaps will do you much more good than using an expensive compound.
IgorT
0
- Joined
- Oct 24, 2007
- Messages
- 4,177
- Points
- 0
Benm said:
Exactly! I used plain old CA, when glueing heatsinks to my helicopter motors and my laser, and in both cases it works perfectly, since there is no gap in between.. (verified with an IR thermometer)
Of course, when it comes to lasers, CA can have nasty side effects.. The vapours can destroy the window of the LD or the lense.. That's why i covered the LD with a piece of scotch, and waited for the glue to completely dry, before putting the lense in.
Benm
0
- Joined
- Aug 16, 2007
- Messages
- 7,896
- Points
- 113
The thing with CA is that there must really be no gap at all in between, as the stuff really shrinks when it cures and the solvents vaporize off.
- Joined
- Aug 17, 2007
- Messages
- 238
- Points
- 0
YES!!! Good call Ben. This stuff has medical risks! Use caution!Benm said:
IgorT
0
- Joined
- Oct 24, 2007
- Messages
- 4,177
- Points
- 0
Benm said:
In that case it must also be quite good at conducting heat (at least in thin layers), cos in the case of the motors i mentioned, they went from scorching hot to barely warm, just by glueing two of those DIP heatsinks on them..
You have to squeeze everything together strong, of course, to make the layers as thin as possible.. That way they can't do much thermal insulating.
Benm
0
- Joined
- Aug 16, 2007
- Messages
- 7,896
- Points
- 113
The benefit of the drying an shrinking effect is that it works to your benefit when you let it cure under pressure. If you fit 2 pieces that actually fit eachoter (for example to flat surfaces) with CA, the layer of glue will be minute.
