Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

PS3 Sled for RBG

Crazyk187

Crazyk187

0
Joined
Jan 13, 2011
Messages
284
Points
0
Will this sled work for a white fusion??? Or do I need the older generation sled for the ps3???

I think this is the 7th gen......it looks the same just smaller!!!!!

feel free to correct me where ever...... I know I don't have to tell most of you that lol ;)

Thanks for all the feed back

SORRY FOR THE BLURRY SHOTS:cryyy:

IMAG0372.jpg


IMAG0371.jpg


IMAG0370.jpg


IMAG0373.jpg


Thanks guys/gals
 





ARG

ARG

0
Joined
Feb 27, 2011
Messages
6,772
Points
113
I'm not sure about this specific sled, but PS3 diodes are usually low powers (20mW IIRC?), you'd be better off buying a PHR sled for 8$ The PHR diodes can go to 100mW, 120mW if you push them hard.
 
Kmor2004

Kmor2004

0
Joined
Jun 12, 2011
Messages
292
Points
0
also If you use the sled like a white fusion, the PHR mirror has better perfomance supposedly.
 
Crazyk187

Crazyk187

0
Joined
Jan 13, 2011
Messages
284
Points
0
O I would be switching all the diodes I was just talking about the sled being used for the combing of the 3
 
Kmor2004

Kmor2004

0
Joined
Jun 12, 2011
Messages
292
Points
0
Thats what I mean, if you dig up I think Jayrobs 1st post about the White fusion he said that a PS3 sled and the optics from it were being used, but the mirror was more "lossy" then a mirror from a PHR sled, I think he was losing something like 30-50mW per color with the PS3 mirror VS 10-20mW loss from the PHR mirror.
 
Crazyk187

Crazyk187

0
Joined
Jan 13, 2011
Messages
284
Points
0
What mw's are good for a descent kit?????

I mean I know the more power the brighter it will be but do you guys recommend anything. I can get low cost red and free ps3 Bluerays witch I think are 30wm....
 
Crazyk187

Crazyk187

0
Joined
Jan 13, 2011
Messages
284
Points
0
Hey all posting on this thread again cuz i took the diode out of that sled. I am told it is from a PS3. Well it has to be thats were it came from. Anywayz... it only has one diode in it as you might be able to see. It has 4 pins.... I used search, and i really cant find a definitive answer to what it is???

IR?
IR/BR?
IR/RED?


Thanks you guys........and gals. :)
 
chipdouglas

chipdouglas

0
Joined
Dec 23, 2008
Messages
3,948
Points
63
i'm to lazy to search, but search for diode compilation thread.

also the easiest way to make rgb would be to get the cheap dichros and mounts from olike, or a member who sells guts from the 445nm projector. and add your lasers. mount it all to the smallest base plate possible.

michael.
 
chipdouglas

chipdouglas

0
Joined
Dec 23, 2008
Messages
3,948
Points
63
np. while it might not be the smallest route, once you hone your skillz you could make anything you wanted after.


michael.
 
You must log in or register to reply here.




Top