Anybody have the blu-ray pinouts NOT on Finartdiography.com site? Seems every search references that site,and every time I try to go to that site, or see a linked picture, I get a Bandwith limit error. Thanks in advance i fanyone has this. Blu-ray from psxboy.com just arrived. Host with DDL circuit waiting in garage......
LPF Donation via Stripe | LPF Donation - Other Methods
Links below open in new window
ArcticMyst Security by Avery
Looking for blu-ray pinout NOT on fineartdiogrophy
- Thread starter desslok
- Start date
- Joined
- Nov 28, 2007
- Messages
- 31
- Points
- 0
Re: Looking for blu-ray pinout NOT on fineartdiogr
desslok
Here you go:
Going anti-clockwise from 12 o'clock gives you the Violet laser diode. There's Red and IR too.
Do you know if anyone here has made switching circuitry to utilise each of these diodes from the one can?
Good luck with the build! Don't rush it!
I've got my bluray diode sitting in my anti-static bag. Just looking at me daring to break it...I bought a pointer from Lesley Wright in the meantime so I can bask in its glorious blue beam...ah....
desslok
Here you go:
Going anti-clockwise from 12 o'clock gives you the Violet laser diode. There's Red and IR too.
Do you know if anyone here has made switching circuitry to utilise each of these diodes from the one can?
Good luck with the build! Don't rush it!
I've got my bluray diode sitting in my anti-static bag. Just looking at me daring to break it...I bought a pointer from Lesley Wright in the meantime so I can bask in its glorious blue beam...ah....
Attachments
Re: Looking for blu-ray pinout NOT on fineartdiogr
Nice, thanks a ton! Not sure if anybody has made a switching circuit. I have thought about it. But in all honesty, i would probably make 2 circuits, 2 switches if anything. Although my idea would be a 2 stage trigger, pull halfway and the violet lights up, pull the trigger all the way back and the red ignites/pops your target.
OK, off to the laboroatory,...er...I mean garage
"muahhahahhaha"
Nice, thanks a ton! Not sure if anybody has made a switching circuit. I have thought about it. But in all honesty, i would probably make 2 circuits, 2 switches if anything. Although my idea would be a 2 stage trigger, pull halfway and the violet lights up, pull the trigger all the way back and the red ignites/pops your target.
OK, off to the laboroatory,...er...I mean garage
"muahhahahhaha"
- Joined
- Jan 7, 2007
- Messages
- 6,309
- Points
- 83
Re: Looking for blu-ray pinout NOT on fineartdiogr
Sorry to "pop your target" but the red in a PS3 sled is a reader. I toasted one at about 70 mA. Damage the red and you may loose the Blu.
Mike
Sorry to "pop your target" but the red in a PS3 sled is a reader. I toasted one at about 70 mA. Damage the red and you may loose the Blu.
Mike
B
Benny_Hill
Guest
Re: Looking for blu-ray pinout NOT on fineartdiogr
Hi im still new to all of this and wondering if there is anyone who can give a quick but thorough walk through. I just received my PS3 sleds from psxboy and dont want to touch them unless I can get some help with the major issues. Ive looked for links, but just cant find anything reassuring to get started. Mainly if anyone has some tips, links or experiance in the following:
-harvesting
-simplest driver (safe)
-the dont do's
I hope one of you have the time to help a n :-X :-Xb, as I am quite anxious to dig in. I have read a lot of the posts, and I have to say there are some really creative, and smart people on here. I dont think there is another forum like this! Very cool and very crazy, it just cant be beat!
Thanx in advance
Benny
Hi im still new to all of this and wondering if there is anyone who can give a quick but thorough walk through. I just received my PS3 sleds from psxboy and dont want to touch them unless I can get some help with the major issues. Ive looked for links, but just cant find anything reassuring to get started. Mainly if anyone has some tips, links or experiance in the following:
-harvesting
-simplest driver (safe)
-the dont do's
I hope one of you have the time to help a n :-X :-Xb, as I am quite anxious to dig in. I have read a lot of the posts, and I have to say there are some really creative, and smart people on here. I dont think there is another forum like this! Very cool and very crazy, it just cant be beat!
Thanx in advance
Benny
- Joined
- Jan 12, 2008
- Messages
- 3,290
- Points
- 83
Re: Looking for blu-ray pinout NOT on fineartdiogr
Welcome to the forum
Here you go: http://www.fineartradiography.com/hobbies/lasers/blu-ray/diode.html
Have a good read, all that you need to know is here. Feel free to ask questions if you need more help
Welcome to the forum
Here you go: http://www.fineartradiography.com/hobbies/lasers/blu-ray/diode.html
Have a good read, all that you need to know is here. Feel free to ask questions if you need more help
- Joined
- Sep 22, 2007
- Messages
- 169
- Points
- 18
Re: Looking for blu-ray pinout NOT on fineartdiogr
Benny, in response to harvesting the diode: I just went at mine and basically took apart the entire sled before I found the diode (after which I had a very DUH moment). Its on the side, connected to a ribbon cable. It should just slide right out and then you can desolder the connections.
for a driver, just use the basic DDL driver, it's all over the forum, use the search button
Benny, in response to harvesting the diode: I just went at mine and basically took apart the entire sled before I found the diode (after which I had a very DUH moment). Its on the side, connected to a ribbon cable. It should just slide right out and then you can desolder the connections.
for a driver, just use the basic DDL driver, it's all over the forum, use the search button
B
Benny_Hill
Guest
Re: Looking for blu-ray pinout NOT on fineartdiogr
I just read the all the info of the link provided, it quite informative. One question I still have is, what is a suitable dummy load for this. I have some stuff kicking around but am not sure what to use. :-[
I just read the all the info of the link provided, it quite informative. One question I still have is, what is a suitable dummy load for this. I have some stuff kicking around but am not sure what to use. :-[
- Joined
- Jan 12, 2008
- Messages
- 3,290
- Points
- 83
Re: Looking for blu-ray pinout NOT on fineartdiogr
Two groups of 3 LED's in series connected in parallel worked great for me
Two groups of 3 LED's in series connected in parallel worked great for me
B
Benny_Hill
Guest
Re: Looking for blu-ray pinout NOT on fineartdiogr
That sounds easy enough, what should be my target ma.? I hear 38, but that may have changed, is that too much?
That sounds easy enough, what should be my target ma.? I hear 38, but that may have changed, is that too much?
- Joined
- Jan 12, 2008
- Messages
- 3,290
- Points
- 83
Re: Looking for blu-ray pinout NOT on fineartdiogr
38ma is the highest, safe current. If you use a pot you can find the lasing threshold and then go up another 10ma.
38ma is the highest, safe current. If you use a pot you can find the lasing threshold and then go up another 10ma.
B
Benny_Hill
Guest
Re: Looking for blu-ray pinout NOT on fineartdiogr
thank you soooo much, I just couldnt start doing anything until I talked it over first. These diodes came from hong kong but look to be well worth the wait. Any idea where to get some kinda spec sheet for these ones?? I found for Sharp, but 120mw! so I dont believe there will be any use for that
thank you soooo much, I just couldnt start doing anything until I talked it over first. These diodes came from hong kong but look to be well worth the wait. Any idea where to get some kinda spec sheet for these ones?? I found for Sharp, but 120mw! so I dont believe there will be any use for that
- Joined
- Jan 12, 2008
- Messages
- 3,290
- Points
- 83
Re: Looking for blu-ray pinout NOT on fineartdiogr
Sorry, got no clue, maybe it is the same as in ps3...? Nichia perhaps?
Sorry, got no clue, maybe it is the same as in ps3...? Nichia perhaps?
B
Benny_Hill
Guest
Re: Looking for blu-ray pinout NOT on fineartdiogr
The one i have is from psxboy.com, it looks to be an aftermarket but its for a ps3. Thats ok, as long as it works, the details can wait ;D
The one i have is from psxboy.com, it looks to be an aftermarket but its for a ps3. Thats ok, as long as it works, the details can wait ;D
- Joined
- Jan 12, 2008
- Messages
- 3,290
- Points
- 83
Re: Looking for blu-ray pinout NOT on fineartdiogr
Well all that I can say is good luck with your BR
Well all that I can say is good luck with your BR
B
Benny_Hill
Guest
Re: Looking for blu-ray pinout NOT on fineartdiogr
I actually got one more question, where I live, Radio shack no longer exists. They are called The Source by Circuit City. THIS SUCKS! It seems the overall IQ of the country has declined over the years, and supply of some of the more popular bits and bites being used, are no longer available. The Daedal circuit for the BR calls for a lm317, I have a 7805 from nexxtech (the source, aka RadioShack). Its a small voltage regulator with three pins : input, ground, output. It says +5vdc . up to 1A. Is this a suitable substitute?
I actually got one more question, where I live, Radio shack no longer exists. They are called The Source by Circuit City. THIS SUCKS! It seems the overall IQ of the country has declined over the years, and supply of some of the more popular bits and bites being used, are no longer available. The Daedal circuit for the BR calls for a lm317, I have a 7805 from nexxtech (the source, aka RadioShack). Its a small voltage regulator with three pins : input, ground, output. It says +5vdc . up to 1A. Is this a suitable substitute?
