Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

DIY Homemade laser diode driver

Status
Not open for further replies.
Joined
Oct 28, 2007
Messages
2,631
Points
48
also, I dont understand your resistor setup man.

look: no pot= okay

dont compensate the 100ohm pot with resistors, thats not needed


for a senkat diode (650 red) you need 5 ohms, or 2 10ohm resistors in parallel

for a blu-ray, you need at least 8v input, and a 33 ohm resistor
 





Joined
Feb 3, 2008
Messages
12
Points
0
Wait... I thiught this driver worked for the Stonetek 16X (SLD1236V I think) Laser diode. Someone mentioned a 650mW senkat. If it is for this "senkat" one will it still work for my sony 16X? I hope it does, but if not can someone give me a link to a driver that will work (if this one doesn't) Thanks
 
Joined
Oct 28, 2007
Messages
2,631
Points
48
tiedyeguy said:
Wait... I thiught this driver worked for the Stonetek 16X (SLD1236V I think) Laser diode. Someone mentioned a 650mW senkat. If it is for this "senkat" one will it still work for my sony 16X? I hope it does, but if not can someone give me a link to a driver that will work (if this one doesn't) Thanks

i said 650nm, which is red color

there are no 650mW diodes that I know of...

the diode I meant are the stonetek/senkat sony 16x diodes he sells on stonetek.org
 
Joined
Feb 2, 2008
Messages
259
Points
0
MaO said:
Is this driver only for red diodes or also other colors?


Did you read anything or just post?   If you look at gazoo's post 5 posts above yours #783 you will get your answer.  (you need more volts and less resistance).
 
Joined
Oct 28, 2007
Messages
2,631
Points
48
goldfingerfif said:
[quote author=MaO link=1185701612/780#788 date=1202224014]Is this driver only for red diodes or also other colors?


Did you read anything or just post?   If you look at gazoo's post 5 posts above yours #783 you will get your answer.  (you need more volts and less resistance).[/quote]


WRONG

YOU NEED MORE VOLTS AND MORE RESISTANCE, NOT LESS


RED: 6v input 2 10ohm resistors in parallel

Blu-ray: 8v input and 33 ohm resistor
 
Joined
Feb 2, 2008
Messages
259
Points
0
amkdeath said:
[quote author=goldfingerfif link=1185701612/780#789 date=1202225277][quote author=MaO link=1185701612/780#788 date=1202224014]Is this driver only for red diodes or also other colors?


Did you read anything or just post?   If you look at gazoo's post 5 posts above yours #783 you will get your answer.  (you need more volts and less resistance).[/quote]


WRONG

YOU NEED MORE VOLTS AND MORE RESISTANCE, NOT LESS

RED: 6v input  2 10ohm resistors in parallel

Blu-ray: 8v input and 33 ohm resistor[/quote]

I think you left your caps lock on, but you realized it halfway through your post.  I think it was an accident, like my typo (more instead of less).  The guy can figure it out on his own by reading so we don't have 30 of these 53 pages just the same question.  Oh yeah careful of that caps key, and the big text, I think you accidentally clicked something to make it bigger.
 
Joined
Oct 28, 2007
Messages
2,631
Points
48
You know, I must say YOU ARE NOT FUNNY!

I ddnt leave caps lock on, I HELD DOWN THE SHIFT KEY FOR THAT WHOLE LINE OF TEXT

I also PURPOSELY made the text BIG

not to be angry at you, but to make it clear to some new builders the correct configuration of thier drivers.

I do agree with you about reading the thread, but I doubt even you read all 53 pages goldfingerfif

P.S. there is a little font size setting to "click on" to make the text bigger if you didnt know

regards,

amk
 
Joined
Aug 26, 2007
Messages
334
Points
0
tiedyeguy said:
One more thing. All my radioshack had was a 10 0hm 1-watt resistor, and a 25 0hm potentiometer. Would these parts work? I heard the potentiometer will work but I don't know about the resistor. Sorry if this is a total noob question... I am a noob I guess... thanks for whatever feedback I get in advanced :)


I think the 1 watt resistors are those big ones. Radioshack has the smaller ones in a 10 pack(10 or 5 pack) for $0.99. Yeah you can use the 25 ohm pot.
 
Joined
Sep 1, 2007
Messages
1,591
Points
0
to clerify one more thing reds can't should not be ran with a 9v battery to the lm317 last post chido i promise
 

MTG18

0
Joined
Jan 16, 2008
Messages
28
Points
0
I have made this driver just as described, and am pretty confident in its accuracy although I am getting an output of 5V to the LD and Im using a 6 volt power source. Isn't the LM317 supposed to drop the voltage around 3V from the input source? Anyways, any suggestions as to what the problem could be would be very appreciated. Thanks!
 
Joined
Feb 3, 2008
Messages
12
Points
0
So... I got it mostly right I think. I had to use a 25-0hm rhetostat (is that the word?) and I had to use a 1-watt 10-0hm resistor. Also, whats the difference between capacitors? I think I got the wrong kind because they don't have the 47 uF in the right kind, I used an electryolic capacitor. If I can't use that, is there any other kind I can subsitute with? Sorry about the barrage of questions. Thanks for the help in advanced.
 

chido

0
Joined
Dec 4, 2007
Messages
1,918
Points
0
It doesn't matter what kind it is, it can be a tantulum or an electryolic, what's the uf in your capacitor, is it still 47?
 

Gazoo

0
Joined
Jun 9, 2007
Messages
3,206
Points
38
I am using 10uf 16 volt capacitors. You don't need to use capacitors with higher ratings, but if you have them they are ok to use.

MTG18, you need to have a load connected to the output of the regulator for the voltage to drop. Have you tested your driver with a load?
 
Status
Not open for further replies.




Top