Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

Ray foss 150mw FLX problem's

fullinfusion

fullinfusion

0
Joined
Jul 2, 2010
Messages
86
Points
0
Well I just recieved my 150mw flx green laser from Faona today and it's not what I expected.

I asked Fayona if she could please send me a laser with real good divergence and to make sure the diode was nice and straight.... my 50mw flx was slightly off center but hardly noticable and not worried about it.

Fayona replied, I get what you mean and will pass on the info the the engineers :)

Cool Im thinking,

well the bloody host was not even remotely close to being drilled in the center for the Diode...

result, a pointer that is way off center!

I am very happy with the burning capability of this crooked monster, If I had to guess Id say its running around 170ish MW

The host chamber gets nice and warm shortly after the unit is powered on which I learned from here is a good thing....

Is there any way I can fix this laser myself? or should I just send it back for a replacement?

DSC00157.jpg


thanks
 
Last edited:





fullinfusion

fullinfusion

0
Joined
Jul 2, 2010
Messages
86
Points
0
am I posting in the wrong thread?

I see lots of ppl but nothing being posted, If this is in the wrong thread please Moderator, move it to the appropriate thread.:thinking:

Thanks :whistle:
 
goninanbl00d

goninanbl00d

0
Joined
Jun 12, 2010
Messages
892
Points
0
If you're concerned about it, then send it back. There's not much you can do without voiding the warranty.

Sidenote- you see that 'lens' in the picture you posted up? That isn't a lens- that's the output coupler. How that's aligned has an effect on the crystals themselves, and it may be mounted off-centre.

Anyway- got more pictures showing the hole in the host, or the wonky beam? A beam leaving the hole off-centre and a beam coming out at an angle are two very different issues.
 
iwannapony

iwannapony

0
Joined
May 27, 2010
Messages
123
Points
0
i have the same exact problem, but i wont send it back. took too long to get. and im not too worried about it, its a cheap laser.
 
fullinfusion

fullinfusion

0
Joined
Jul 2, 2010
Messages
86
Points
0
goninanbl00d said:
If you're concerned about it, then send it back. There's not much you can do without voiding the warranty.

Sidenote- you see that 'lens' in the picture you posted up? That isn't a lens- that's the output coupler. How that's aligned has an effect on the crystals themselves, and it may be mounted off-centre.

Anyway- got more pictures showing the hole in the host, or the wonky beam? A beam leaving the hole off-centre and a beam coming out at an angle are two very different issues.
Click to expand...
Sure here you go, sorry for the bad quality... I have no tripod :eek:

DSC00158.jpg
 
fullinfusion

fullinfusion

0
Joined
Jul 2, 2010
Messages
86
Points
0
I hear ya, but I like having something that looks cool and not off center.

I paid the 23 dollars for ups and it took 3 days to get, Im in Canada.
 
fullinfusion

fullinfusion

0
Joined
Jul 2, 2010
Messages
86
Points
0
Ok thanks for that, Im new to this and never knew that about the crystal.

Ok you see the center lens right?

around that there is a small circular copper housing, then below that is the big copper piece.... you see the diode isnt sitting in the center?

the left side has a big blob of glue and the right side the glue is way smaller?
 
goninanbl00d

goninanbl00d

0
Joined
Jun 12, 2010
Messages
892
Points
0
The output coupler is off centre, and it's designed to be off-centre. Even on CNI lasers the output coupler will not be square on the piece of brass. That is normal. You can't actually see the diode either, what you're looking at is the output coupler.

labelxtals.jpg


That's how the green light is generated- it's not just a diode. Only difference is- you have an external output coupler which is set and adjusted at the factory.

You may have a crooked lens. Do you have a picture of the bit you unscrewed to reveal the output coupler, and the insides of that?
 
fullinfusion

fullinfusion

0
Joined
Jul 2, 2010
Messages
86
Points
0
goninanbl00d said:
The output coupler is off centre, and it's designed to be off-centre. Even on CNI lasers the output coupler will not be square on the piece of brass. That is normal. You can't actually see the diode either, what you're looking at is the output coupler.

labelxtals.jpg


That's how the green light is generated- it's not just a diode. Only difference is- you have an external output coupler which is set and adjusted at the factory.

You may have a crooked lens. Do you have a picture of the bit you unscrewed to reveal the output coupler, and the insides of that?
Click to expand...
I(m not talking about the out put coupler, Im talking about the brass body that surounds the coupler.... its not set in the center of the larger brass piece.
 
goninanbl00d

goninanbl00d

0
Joined
Jun 12, 2010
Messages
892
Points
0
Yes it does.

I've never seen an OC that off centre before, but the end result should be an offset beam, not an angled beam.

There should be a lens inside the housing that you screwed off. Check that lens.
 
fullinfusion

fullinfusion

0
Joined
Jul 2, 2010
Messages
86
Points
0
goninanbl00d said:
Yes it does.

I've never seen an OC that off centre before, but the end result should be an offset beam, not an angled beam.

There should be a lens inside the housing that you screwed off. Check that lens.
Click to expand...
I unscrewed the lens cap off my 50mw flx laser and placed it on the 150wm housing and its the same off angle beam.

Fayona just replied to my e-mail....

fay.jpg


Im starting to think I can live with it just for the fact of the high stable mw's its pumping out...:crackup:

what you all think I should do? :thinking:
 
jbtm

jbtm

0
Joined
Mar 22, 2010
Messages
495
Points
0
Never know...I see a lot of people saying Rayfoss lasers are outputing more than they say (200mw doing 220 for example) and few that say its below.

I got their 200mw waterproof red and mine was fine :p If it's adjustable and you can make a fine dot on the wall that your happy with, id say keep it...Im able to make a nice 2mm dot on a wall ranging 15-25ft away...I cant say exactly because I dont have proper red glasses.
 
fullinfusion

fullinfusion

0
Joined
Jul 2, 2010
Messages
86
Points
0
nice to know, Thanks man.

I just got the wife to beam onto the kitchen wall from the living room and Id say the dot is 3mm at the most outter edge, I was wearing my new glasses and must say.... Im glad to have them, the 50mw is bright but this one is wildly bright!!!
 
fullinfusion

fullinfusion

0
Joined
Jul 2, 2010
Messages
86
Points
0
I'm sending the unit back, it started to drop in intensity and fluctuate bright dim bright dim. What causes that? bad driver?

But any way Fayona is great to deal with :D
 
You must log in or register to reply here.




Top