high power laser pointer report from warnlaser.com

Swot Laser Pointer Portable Green Laser Pointer
[ch61548] [ch12288]Specification
Model Swot Laser Pointer
Wavelength (nm) 532
Output power (mW) 350mw+-20mw
Beam divergence (mrad) 1.0-1.2mrad
Transverse mode TEM00
Beam diameter (mm) 1.0-1.2mm(at the output mirror)
Dimension (mm) [ch1060]23x160mm
Laser power supply 1×3.6V Sanyo 18650 Battery 2300mAh
Operating temperature (°C) 15-35
Operating mode CW
Lifetime >5000hours
Net weight
0.3kg
Applications Fluorescence Excitation, Direction Indicator at Long Distance, Tracks Detection, star pointing
[ch61548] [ch12288]Operation and Preaution[ch65306]
1. Put batteries into the laser tube with the “+” outward.
2. Never point the laser beam to anybody, especially the eyes.
3. When you needn’t use the pointer for a long time, you should keep it in a place where there is no static and humidity..
4. You'd better not to bump the pointer.
5. You'd better not to disassemble or rebuild the machine, we will not responsible for the damage caused by this.
6. The laser Pointer is quite sensitive to the temperature. The output power will vary when the temperature varies.
7. It is better for lifetime of laser to operate laser about 20 seconds to 30 seconds every time.






SWOT Laser Pointer Portable Green Laser Pointer
[ch61548] [ch12288]Specification
Model SWOT Laser Pointer
Wavelength (nm) 532
Output power (mW) 400mw+-20mw
Beam divergence (mrad) 1.0-1.2mrad
Transverse mode TEM00
Beam diameter (mm) 1.0-1.2mm(at the output mirror)
Dimension (mm) [ch1060]23.5x168mm
Laser power supply 1×3.6V Sanyo 18650 Battery 2300mAh
Operating temperature (°C) 15-35
Operating mode CW
Lifetime >5000hours
Net weight
0.3kg
Applications Fluorescence Excitation, Direction Indicator at Long Distance, Tracks Detection, star pointing
[ch61548] [ch12288]Operation and Preaution[ch65306]
1. Put batteries into the laser tube with the “+” outward.
2. Never point the laser beam to anybody, especially the eyes.
3. When you needn’t use the pointer for a long time, you should keep it in a place where there is no static and humidity..
4. You'd better not to bump the pointer.
5. You'd better not to disassemble or rebuild the machine, we will not responsible for the damage caused by this.
6. The laser Pointer is quite sensitive to the temperature. The output power will vary when the temperature varies.
7. It is better for lifetime of laser to operate laser about 20 seconds to 30 seconds every time.

Re: high power laser pointer report from warnlaser

Laser reviews mean nothing when coming from the company that sells them.

Why do you have a picture of a blue pointer then a photoshopped "green" one under it? I don't see any fake stats for a blue pointer.

Re: high power laser pointer report from warnlaser

HOORAY FOR MORE SCAMMING!!!

Okay everyone, time to gang up on pseudo for calling BS on an obvious case of a scam... because pseudo just isn't being polite enough to our little scamming friend.

Re: high power laser pointer report from warnlaser

So that's supposed to be a 400mW green pointer? Or a 400mW blue pointer? :

Re: high power laser pointer report from warnlaser

i am on pseudo's side... no matter what else, if someone is low enough to post a scam like this they need to be booted off the forum regardless...
SCAM

Re: high power laser pointer report from warnlaser

to spyrorocks
blue laser pointers are same style and same series.

scam?give me reasons,thanks.

see the details.
http://www.warnlaser.com/faqs.html#q8

if customers are not satisfied with our product within 7 days ,we can return all.
you loss money?loss what?please tell me.

btw:you have bought warnlaser pointers?you have it?you try our laser pointers?
please tell me.

if you don't have,you can comment everything,but don't malign everyone.it's bad habit.

Re: high power laser pointer report from warnlaser

Anyone who's been in the hobby for a year or two should be able to scan your site and see you have some of the same units vavolo (or whatever theyre called), spymode, etc. sell - units that have been purchased from these companies and conclusively proven as scams.

Now sure, we havent bought the same scam laser from you and again proven its a scam. That would just be a waste of time and money. Why should we be burdened with proving the same laser is a scam, over and over again, just because new resellers keep popping up?

If you REALLY must insist you aren't full of BS, contact me to arrange sending a 150mW green pen-unit for testing. I'll cover return shipping out of my own pocket and let everyone know the results.

Re: high power laser pointer report from warnlaser

I'm not sure who posted this further information, reminding us of proof that YOUR SPECIFIC LASERS ARE A SCAM, but I must commend them  http://www.warnlaser.com/forum/forum_posts.asp?TID=8&SID=9e23da673dcc8b3a98ced1a4bc949ca2

Warnlaser, if that link goes down or that post is edited, you will have proven you're not only a scammer, but a cheating liar to boot. For your own sake leave that post be - if you must try to defend yourselves though, feel free.



EDIT - in case it does get altered, here is a copy of the original:

"WarnLaser is nothing but another scam of a laser company, or should I perhaps say that they might be in the process of being scammed by their suppler (To make things more far, but they really should check the output of their lasers before they are shipped. Any real laser company checks output).

As reviewed on LaserPointerForums.com, their 30mw model preformed at only 15mws. Thats nothing but a pathetic excuse for a underpowered piece of crap laser (Not the fact that it was 15mw, the fact that its severally under the advertised power output). WarnLaser is misleading people to buy its mass produced crap, thats all made in large factories that also make cheap dollar store wallets and Fake Knockoff Rolex Watches.

There is no quality control. In fact, there is no quality. You don't even include an IR filter in your lasers, that proves how much you value the safety of your customers. Cutting safety corners to lower production costs, typical in china.

Also, if you truly were a legit company, why is the English on your site so terrible? Any legit company would hire a professional translator. It looks really tacky, but hey, since you guys are out just to rip a few "suckers" off, what does it matter in china, right?

You even had a fake ILDA certificate on your site at one point (Now removed). You are obviously a reseller, so why do you claim to be an OEM? On top of that, you faked certification (ILDA).

The laser hobby has been polluted by fake scams like warnlaser, spymode, etc etc. All claiming to sell decent lasers, but never preform to what they are advertised to.

Ditch warnlaser, find a better company to buy from (NovaLasers, LaserGlow), and don't give these scammers the time of day. Cut off their revenue stream, and they won't have the resources to continue scamming innocent people who just love lasers.

(It seems you deleted my last thread. Trying to hide something?)

-The Anonymous Laser Hobbiest, exposing the truth
"

Re: high power laser pointer report from warnlaser

Dude, first of all, you can't speak semi-decent english.Secondly, you couldn't even hire someone who can speak english to write the text on your site.Just drop it.

Re: high power laser pointer report from warnlaser

Warnlaser, if that link goes down or that post is edited, you will have proven you're not only a scammer, but a cheating liar to boot. For your own sake leave that post be - if you must try to defend yourselves though, feel free.

Click to expand...

WHERE'D IT GO!!!!!!

I think that speaks volumes, well done pseudo.

Regards rog8811

Re: high power laser pointer report from warnlaser

Wow, they deleted it...

But it looks like theres another one now.... http://www.warnlaser.com/forum/forum_posts.asp?TID=9&PID=19

Re: high power laser pointer report from warnlaser

Honestly, if you want to come HERE an spoon feed us bullshit you better have a better plan than "Open up and let the train in"

we dont gobble down scam from scums like many other people do.... cough LC....

This forum, from what i can tell, is made for the sole purpose of educating yourself about lasers, picking the right one, and then having fun with it.

If you want to advertise, contact one of the fair mods here and im sure they would be overly zealous to test the protuct.

If its a nice product--You have nothing to worry about. you get free advertising from a RELIABLE source.

Whats the problem???

Re: high power laser pointer report from warnlaser

The problem is they are scammers, and by sending out a laser we will build even more evidence against them.

Re: high power laser pointer report from warnlaser

Let them send one to Pseudo for independent analysis. He's made a good offer and he has the equipment. Not everyone with weak English skills is bad.
That's why there is a review forum here.

Mike

Re: high power laser pointer report from warnlaser

They should just send us all a free pointer

Re: high power laser pointer report from warnlaser

Hemlock Mike said:

Let them send one to Pseudo for independent analysis.  He's made a good offer and he has the equipment.  Not everyone with weak English skills is bad.  
That's why there is a review forum here.

Mike

Click to expand...

No but the fact that they didn't even make the effort to hire someone to make their site show a huge lack of seriousness.Their site is full of ridiculous spelling errors, that's just not the way to make a good impresion.I mean, that has made a very bad impression on me the first time I was thier website.