Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

aixiz laser modules

kiyoukan

kiyoukan

0
Joined
Oct 24, 2009
Messages
2,555
Points
48
i ordered 10 aixiz laser modules and found that 4 out of my ten wont screw together right.
The part from the diode holder to the back end always has a gap of 1.1 mm i tried to clean the threads thinking there was gunk in the way but it happened of 4 of them.
Has anyone ever had this?
 





ped

ped

0
Joined
Nov 25, 2008
Messages
4,889
Points
113
Yup i have one at home...doesnt even try to screw together...but i thought...thier not megabucks so what the hell haha
 
kiyoukan

kiyoukan

0
Joined
Oct 24, 2009
Messages
2,555
Points
48
well i just wanted to know i mean 4 out of my ten thats a bit much, i know i am not paying tons of money but when i buy something i expect it to work.
 
ped

ped

0
Joined
Nov 25, 2008
Messages
4,889
Points
113
kiyoukan said:
well i just wanted to know i mean 4 out of my ten thats a bit much, i know i am not paying tons of money but when i buy something i expect it to work.
Click to expand...

No thats fair comment, i misread...didnt realise it was 4 of them?!? , thats is unusual.
 
lasersbee

lasersbee

0
Joined
Sep 20, 2008
Messages
17,622
Points
113
Like T_J stated... if you bought them from Aixiz...
Just contact them... They have good customer service..

It is beyond me why you didn't do that first before posting...:thinking:


Jerry
 
kiyoukan

kiyoukan

0
Joined
Oct 24, 2009
Messages
2,555
Points
48
well i wanted to know if this was a problem only to me, seeing as i have never even heard of this happening i thought maybe it was me but even after switching them around i still have 4 that wont screw all the way down.
You know maybe user error, but it finds out that its manufacturer tolerances error.
Trust me i would in no way try to bash aixiz i just wanted to know if i was alone in this problem but it sounds like others have had this but only like on or 2.
 
L

leftkidney

0
Joined
Aug 17, 2010
Messages
92
Points
0
I dont have any of these but I would get a micrometer out and check to see if all of them are the same size - I would think that the threaded part is either to long on the male part or the female part doesent have the threads cut all the way to the end and it wont fit

you might be able to fix this by taking the male part and sanding it down a little so its shorter

again I dont have these so I am not sure if this will even work
 
You must log in or register to reply here.




Top