Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

RGB hand-held laser

LaserCo

LaserCo

0
Joined
Sep 25, 2007
Messages
434
Points
28
This will be an interesting build, sounds like lots of work with the LCD and everything!
 





M

Multimode

0
Joined
Feb 10, 2012
Messages
330
Points
0
Short update at the start of the thread to keep all the photos together.
ATB
MM
 
Last edited:
ARG

ARG

0
Joined
Feb 27, 2011
Messages
6,772
Points
113
Extremeshade said:
I bet Arglaser could give you some alignment tips :D
Click to expand...

Heh. Not really. He's doing the right thing using mounts. Makes my stuff look like caveman work. You just got to have the patience to get it right, which isn't easy in a small area.
 
M

Multimode

0
Joined
Feb 10, 2012
Messages
330
Points
0
ARGLaser said:
Heh. Not really. He's doing the right thing using mounts. Makes my stuff look like caveman work. You just got to have the patience to get it right, which isn't easy in a small area.
Click to expand...

Hi Arg, you have been there and done it !
...all I got is a few shiny parts at the moment.
The fun (problems) will start when things start geting bolted together......
I'm hoping to have all the mechanical parts made in the next 1-2 weeks.


ATB
MM
 
F

flare09

0
Joined
Oct 19, 2011
Messages
173
Points
0
im going to try a ball joint tyoe with a set screw, and then do like the cinese and encase all of it with hard non-expanding epoxy once its set.
 
ARG

ARG

0
Joined
Feb 27, 2011
Messages
6,772
Points
113
Multimode said:
Hi Arg, you have been there and done it !
...all I got is a few shiny parts at the moment.
The fun (problems) will start when things start geting bolted together......
I'm hoping to have all the mechanical parts made in the next 1-2 weeks.
Click to expand...

Yup. The the optics is the hardest part, but also the most rewarding :D Get it set up where you can point the beam 10m away, so then you can get a good near field and far field alignment :)
 
jander6442

jander6442

0
Joined
Jan 8, 2009
Messages
3,145
Points
83
How are you going to hold the modules?

+1 for chamfering those existing holes
 
Last edited:
M

Multimode

0
Joined
Feb 10, 2012
Messages
330
Points
0
jander6442 said:
How are you going to hold the modules?
+1 for chamfering those existing holes
Click to expand...

There are 3 more holes :D on the uderside that will have a grub screw in to lock the module in place.
You can see one of them on the 3d model underside view, by the circular recess.
They will be hidden by the cover plate that holds the key switch.....
ATB
MM
 
M

Multimode

0
Joined
Feb 10, 2012
Messages
330
Points
0
LCD arrived yesterday - I can now finish the design of the optic bay cover now.
Tools to mill the underside cover arrived too - now need to snatch a bit of machine time:evil:
ATB
MM
 
You must log in or register to reply here.




Top