ped
0
- Joined
- Nov 25, 2008
- Messages
- 4,889
- Points
- 113
Not to mention the 100R pot on the anode of the LD :crackup:
LPF Donation via Stripe | LPF Donation - Other Methods
Links below open in new window
ArcticMyst Security by Avery
Making A super long range IR remote with IR laser diode
- Thread starter plasmaninjaa
- Start date
- Joined
- Sep 20, 2008
- Messages
- 17,622
- Points
- 113
The 100 Ohm pot could be adjusted low enough to
turn ON the LD. Albeit with much difficulty to get a
precise output. But again only if the circuit was complete.
Jerry
turn ON the LD. Albeit with much difficulty to get a
precise output. But again only if the circuit was complete.
Jerry
- Joined
- Mar 17, 2013
- Messages
- 5
- Points
- 0
Yes, sorry about the incomplete circuit. I mentioned that it was only a rough sketch and was up late last night.
I too have thought about making a long ranged tv-b-gone that worked somewhat like this.
Remove the 1uF capacitor from the diagram above.
I too have thought about making a long ranged tv-b-gone that worked somewhat like this.
Remove the 1uF capacitor from the diagram above.
- Joined
- Sep 12, 2007
- Messages
- 9,399
- Points
- 113
- Joined
- Mar 17, 2013
- Messages
- 5
- Points
- 0
Well there was a schematic but lasersbee removed it somehow. :thinking:
daguin
0
- Joined
- Mar 29, 2008
- Messages
- 15,989
- Points
- 113
Read the bottom of your post.
It says, "Last edited by Ped using Jerry's . . . . "
Ped reworked your post for you
Jerry does not have moderator privileges
Peace,
dave
Last edited:
- Joined
- Sep 20, 2008
- Messages
- 17,622
- Points
- 113
I see both of the re-sized and incorrect drawings....
Before pointing your accusing finger at me you should
perhaps get your facts straight.
I'm not a Mod and have no magical powers to manipulate
your posts.
EDIT...
Looks like we posted at the same time...
Either I'm typing Faster or you are typing Slower...:evil:
Jerry
Last edited:
