daguin
0
- Joined
- Mar 29, 2008
- Messages
- 15,989
- Points
- 113
Have you done your maintenance burns this month?
Peace,
dave
Peace,
dave
LPF Donation via Stripe | LPF Donation - Other Methods
Links below open in new window
ArcticMyst Security by Avery
Argon Maintenance
- Thread starter daguin
- Start date
- Joined
- Sep 12, 2007
- Messages
- 9,399
- Points
- 113
I suppose my spectra physics is overdue for a burn. It's been maybe 6 weeks :-/. I fired my HGM up 3 weeks ago, but I'm not worried about that one. It has a massive gas reserve.
Thanks for the reminder!
Thanks for the reminder!
jamilm9
0
- Joined
- Jan 12, 2008
- Messages
- 1,864
- Points
- 0
what do you do to keep a argon good?
daguin
0
- Joined
- Mar 29, 2008
- Messages
- 15,989
- Points
- 113
jamilm9 said:
When an argon gas laser lases it "buries" some of the argon in the metal of the tube. As the tube sits, the buried argon is slowly released. If too much is released the tube gets to too high a gas pressure. If the gas pressure is too high, the tube will have trouble starting. You have to burn an argon at least once a month (some recommend twice a month) to keep the gas pressure down. To keep our gas laser healthy, you are forced (I know . . .it sucks to be us) to use the argon every month.
Peace,
dave
jamilm9
0
- Joined
- Jan 12, 2008
- Messages
- 1,864
- Points
- 0
daguin said:
When an argon gas laser lases it "buries" some of the argon in the metal of the tube. As the tube sits, the buried argon is slowly released. If too much is released the tube gets to too high a gas pressure. If the gas pressure is too high, the tube will have trouble starting. You have to burn an argon at least once a month (some recommend twice a month) to keep the gas pressure down. To keep our gas laser healthy, you are forced (I know . . .it sucks to be us) to use the argon every month.
Peace,
dave[/quote]
ok good i am think of getting a argon in a while(but i am also thinking of getting 2 billion in cash)thats not to bad.Just need one that can take phase 1 one power with the max of 15 amp.
GooeyGus
0
- Joined
- Mar 8, 2008
- Messages
- 2,669
- Points
- 48
I'm going to do mine tonight. I fired it up the day I fixed the power supply, but only for about 10 minutes because my room was already HOT.
It had been about 3 weeks, maybe even more, since I had started it due to the PSU being broken. When I started it for the first time after the hiatus, it was the first time I had ever seen it not start on the first 'click' (it started on the second ;D)
Time to give her a good burnin'
It had been about 3 weeks, maybe even more, since I had started it due to the PSU being broken. When I started it for the first time after the hiatus, it was the first time I had ever seen it not start on the first 'click' (it started on the second ;D)
Time to give her a good burnin'
- Joined
- Feb 28, 2008
- Messages
- 573
- Points
- 0
That's probably something I don't do often enough....in that way argon lasers are kind of like cars - if you don't start and run it ever so often, one day it might not start at all!
Both my argons are in my unheated garage, so I can always fire both of them up (luckily I have outlets that are on two different circuits in the garage) and maybe warm up the garage a bit.
BTW, speaking of temperature - my garage is seldom below freezing, usually around 40F for most of the winter - it won't be harmful to keep my argon lasers in a cool place like that, will it?
Both my argons are in my unheated garage, so I can always fire both of them up (luckily I have outlets that are on two different circuits in the garage) and maybe warm up the garage a bit.
BTW, speaking of temperature - my garage is seldom below freezing, usually around 40F for most of the winter - it won't be harmful to keep my argon lasers in a cool place like that, will it?
how does the "run-in" process for argons compare to that of dpss?
i mean, is there a fault in leaving a quality built dpss laser on the shelf without touching it for months? does not firing up a dpss laser effect the diode or any crucial internals?
i mean, is there a fault in leaving a quality built dpss laser on the shelf without touching it for months? does not firing up a dpss laser effect the diode or any crucial internals?
- Joined
- May 9, 2008
- Messages
- 82
- Points
- 6
I'm 99% sure dpss don't need to be ran like argons. I think that is just an inherited characteristic of gas lasers...darklandz said:
EDIT: Psst, why would you EVER not touch a laser for months???
Razako
0
- Joined
- Mar 17, 2006
- Messages
- 4,301
- Points
- 113
The only thing to watch out for when storing dpss lasers is battery corrosion. Alkaline batteries have a nasty habit of leaking whenever you leave them in a piece of electronic equipment for years. Have you ever found an old mag-light in the closet and opened it up to find a huge mess? You don't want that happening to your expensive lasers.
GooeyGus
0
- Joined
- Mar 8, 2008
- Messages
- 2,669
- Points
- 48
I ended up being lazy and didn't do mine last night, so I'm setting it up right now
I'll let her go for two hours I guess... I have the A/C turned on to counteract the heat ;D
I took a couple pictures just for fun.
Here's an idle....
And here's about 8A (just a guess, I wasn't measuring but it wasn't turned all the way up)
So pretty.... I missed it so much when it was broken
EDIT:
Here's a shot I got of the tube without the cover on. It ran for about 5 seconds with no fan, just long enough to get the shot. For anyone wondering, on the right is the leakage out the HR end of the tube, the spots that are lit up are the exposed parts of the tube itself. The section of the tube to the right is pinkish because of the glow from the red-hot cathode
The tube itself gets much brighter when the power is turned up, but I wasn't about to turn it past an idle without the fan!
I'll let her go for two hours I guess... I have the A/C turned on to counteract the heat ;D
I took a couple pictures just for fun.
Here's an idle....
And here's about 8A (just a guess, I wasn't measuring but it wasn't turned all the way up)
So pretty.... I missed it so much when it was broken
EDIT:
Here's a shot I got of the tube without the cover on. It ran for about 5 seconds with no fan, just long enough to get the shot. For anyone wondering, on the right is the leakage out the HR end of the tube, the spots that are lit up are the exposed parts of the tube itself. The section of the tube to the right is pinkish because of the glow from the red-hot cathode
The tube itself gets much brighter when the power is turned up, but I wasn't about to turn it past an idle without the fan!
- Joined
- Jan 7, 2007
- Messages
- 6,309
- Points
- 83
Why are some pictures so HUGE here ?? Most times I have to scan the picture all over my screen to see what's there.
Mike
Mike
GooeyGus
0
- Joined
- Mar 8, 2008
- Messages
- 2,669
- Points
- 48
Hemlock Mike said:
Sorry... The resolution on my screen is really high so they dont look too big to me, check back in two minutes I'll re-size them
Edit: that should be better
- Joined
- Jan 7, 2007
- Messages
- 6,309
- Points
- 83
I'm running my Argons tonight. Took the first one 10 minutes to get back up to power but it ignited immediately no problem.
If you got 'em -- run 'em
Mike
If you got 'em -- run 'em
Mike
