URGENT-super deal-BUT ONLY a few days to JOIN this GB

Our Projector Group Buy has hit a few snags---

We lost two buyers one a week ago and another =just last night--

IF you were EVER thinking about owning a VERY nice FULL COLOR 1400mW RGB you will NOT find a better deal-

we are paying the price of a 7 color and it came with NONE of the free extras we are getting- If past PJs (more than >35 so far) are any indicator of the quality of these , I am confident the LKRGB5 will be less tha half the price one should expect to pay--

LASERKING has also consistently shown customer service that we rarely see from most China makers/sellers.

if you can jump in here and do it VERY soon I can promise that you will have no regrets- ANd a bunch forum members will be thanking you as the GB has been worked on for months with a goal of delivery asap-
BUT- as these PJs are NOT offered as FULL COLOR those getting the LKRGB5 must accept that only after we pay can LASERKING do the modifications ~one weeks work upgrading them- delivery will not be until after Xmas on the LKRGB5s-all other should be delivered before Xmas.

you can read about details here

http://laserpointerforums.com/f55/update-laserprojector-group-buy-4-time-send-payments-85297.html

PM me NOW - do not post in this thread--

short details
the LASERKING LKRGB5 is prices WITH shipping for >$1248
its & color- and i dont thing you get ANy extras

as a group- and to further promote LK we have a ONE-TIME special deal
We get:
free dhl express ship- typically 72 from DHL China to our doors.
free 10 meter ILDA cable
free flight cases
AND FREE UPGRADE TO FULL COLOR(allow about one week to upgrade these before shipping )

and since past GBs for LK projectors has gone extremely well and both the quality of product and coustomer service that too makes LASERKING a GREAT choice for buying a projector--






*********** below is an old thread-due to time constraints I have done an edit- do not post here BUT PM ME ASAP instead;

&&&&&&&&&&&&&&&

++++++++++++++++++++++++++++++++++++++++
Time for spring cleaning- hak needs $$
I will add stuff and one pic each- if you want to see more pics I will email them to you.
any reasonable offers are appreciated-

subscribe to this thread so you will know whats up and whats left- anything not sold goes to FeeBay--

#1 MC/snow mobile/atv etc riders outfit- SOLDTY JEFF00

very nice jacket with light weight armor on sholders and elbows..-LOTS of KYY zippered pockets and vents.- two pairs pants- gloves and swell backpack to hold all. EASILY 250+$ when purchased new,
only the lighter weight pair of pants & the gloves show ANY wear. These are right size for a rider around 5-8 to 6 ft tall and slim build- waist looks to be around 25 inches.. I will add more info after this post is approved. rain or snow you will be dry and protected.

#2 folding knife- not a common knife- only one I have ever seen like this-
When I read what is printed on the handle i first thought that this is a watermelon knife. Some body ran it thru a crappy sharpener- see photos - it has marks from the grinder- but not too bad- if you collect knives you prolly do not have one like this..

update see newest posts new items

Re: FS bunch of Hak's 'treasures'

Picture(s) of the knife please

Re: FS bunch of Hak's 'treasures'

Lasers, dude, we want lasers! Gas ones, if you got 'em.

If you need money, sell off those orange HeNe's you're hoarding.

Or some used (below market) FB3 DACs, or 0.5 mrad labbies in red.

Re: FS bunch of Hak's 'treasures'

pschlosser said:

Or some used (below market) FB3 DACs

Click to expand...

:crackup: Yes please, I'll take one

Re: FS bunch of Hak's 'treasures'

Len, you KNOW I'm interested in the clothing. Let me know what you are asking for it.

Re: FS bunch of Hak's 'treasures'

the knife
* EDIT to get my post count down*************


Quote:
Originally Posted by pschlosser
Lasers, dude, we want lasers! Gas ones, if you got 'em.

If you need money, sell off those orange HeNe's you're hoarding.

Or some used (below market) FB3 DACs, or 0.5 mrad labbies in red.
I WILL be adding a few 633nm red HeNes --gots no orange one and would never sell if i did sam has both green & yellow for sale at his classifieds- link in afew
LINKAGE.......


He has a LOT of items and some are very low priced.. read everything.

http://www.repairfaq.org/sam/sale/

looks like ATM just one yellow
but 9 greens

note- Sam occasionally forgets to take down ads of items gone.
So you need to find out if something you are wanting is still there.

He has a LOT of items and some are very low priced.. read everything.

http://www.repairfaq.org/sam/sale/




Search P/L for used Fb3- they come up two maybe three times a year- are snatched up in an hour or so and a are not a whole lot below new cost.

I already sell(11 so far) QS Fb3 BELOW market ($600) my price only to forum members is lowest USA at $498 + ship ( but since we are SO close only $487 just for YOU--lol)
FULL refund of purchase price if not happy.

They have always had a high re-sale price tag.



I am doing lunch soon with AixiZ Dr Chuck and will look into a GB on some VERY nice mini 638 labbies- 150 mW- mine showed average of 230mW!!

take a look at them on EBAY seller-- aixiz_laser- these have very small footprint- and you can get matching ones in 532/445 & 405 as well- I may do a bundle deal with 2,3 or all 4.

NEVER buy AixiZ via FeeBay or Amazon- go to AixiZ.com and order there- you can call in your order toll free and use your CC over the phone- When you talk to Chuck or Xia you will need to use my name to get any 'forum member' breaks. Be nice or I will be kicking ass and taking names.



BTW ask any 'old timer' what he paid for QS 'back in the day'
they are MUCH cheaper now. LD 2000 still costs IIRC around $2K.
Or it did at one time.

Re: FS bunch of Hak's 'treasures'

Just few new items- I must have a hundred things i need to part with asap.
So this thread is really just a small start.

#3-- Bow-Lingual
new in box- may be missing just the collar that it came with - does it do what they claim-- IDKFS- you would need to opinion of the 'Dog Whisperer' to know for sure-
make offer
#4 'like new' pelican cases 1170--have three in stock- one is promised and I can get as many more as i want.

..Pelican case.com

7 1/4th X 5 X (deep)2 1/2 * inches



*
This is with no foam or lining
in addition the lid itself is 1/4 " deep
Four small holes in the corner are for mounting
Aon a wall or sufface- if you intend to sumburge this case I
suggest that you femove these and seal with silicon &
replace these or any other screws you
may want two use.
PELICAN gets $14.50 for the 3- piece foam set.on sale at $10.23( I recycle -thats too much$$$)
These are 'like-new- 'pulls' from surplus.
9 of of ten on some better on others.
The labels have been removed ( leaving some small scratches
I have put metal tape where the labels were.
How good are Pelican cases??
they say..
"YOU BREAK IT, WE REPLACE IT... FOREVER."

REG. PELICAN PRICE $35.5O(no foam set)
PLUS SHIPPING-
ship& Tax total $13.18 total =36.64(< to my address in Tx)
(while sale is on-after sale ends total is $48.68)

I feel comfy with $30.spilt ship cost-?$4. +/---actual cost /2-
Tested for size--JL PL-C with tailcap removed
fits but touches the case at all fpur points.
hold one to three or six Ti-Bs(two layers)
Room for two and two places for 16650 batts.
in single layer.
easily holds (two layers) 16 pointer pens size.
long new blade on a good exacto knife(get the 'fat' handle)
and practice you can hand cut pro-looking foam for your lasers.

No foam will be provided- I will place (not glue) a liner for the top and bottom- you can glue these in place or toss them out-

Re: FS bunch of Hak's 'treasures'

Are these not airtight? Or are the screws missing from the vent hole(s)?
Also, do you know the Pelican model number these are equivalent to?
Are those interior or exterior dims?
And maybe some pics of it closed?

Re: FS bunch of Hak's 'treasures'

pschlosser said:

Are these not airtight? Or are the screws missing from the vent hole(s)?
Also, do you know the Pelican model number these are equivalent to?

Click to expand...

in the corners there are four tiny holes- I have put some screws in these- but no silicone-- so afaik they are water tight- the o-rings are fine... BUT if you plan to scuba dive with this case I suggest you seal these tiny hole better than I have,

IIRC these are the 1170 model- use the link I have posted..

I have no clue how long they will be on-sale-
the lifetime free replacement warranty is good no matter where you get a pelican case or flashlight- I found a lite by them that was totally' FUBARED'- mailed it to them and they sent me a brand new one!

Pelican cases are used world-wide for cameras and electronics-
In fact the name 'pelican case' has been used generically to refer to high quaility water tight, crush proof cases..


hak

Re: FS bunch of Hak's 'treasures'

Pics on Bow-lingual & another pic of the Pelican case and..

#5
Some kind of old-timey portable power meter-
WESTON-(SOLD) I did not get the leads & it is untested
I can do any test you ask- more pics Upon request- first 7$ gets it pLus actual shipping cost to you- also make offer--ty--JAMES

Re: FS bunch of Hak's 'treasures'

PM sent on the clamp style meter.

Re: FS bunch of Hak's 'treasures'

Searching 'marlboro gear' gets 163 'hits' .

Marlboro gear | eBay

take a look and if you see an item there that you want me to put in this thread PM me or post.

BTW/FYI- thankfully I quit smoking Marlboros long before the 'Adventure Team' stuff was offered-

I networked w/ friends that still smoked- and got many miles from packs discarded at the beach and car wash trash cans-

One day I found >5000 'miles' in the car wash dumpster- all in a zip lock bag- somebody had filled out the form and even wrote the check for shipping (torn into tiny pieces)

My 'Monk' powers told me they were a married couple who had saved these but failed to send them in on time-

turned out you could still (limited )use them in the following offers- so I used every one of them..I was able to piece the check back together enough to see the name on it.

About a week or two from finding this 'stash' of miles I saw their name in the local paper-- they were filing for divorce!!

Was it due to one spouse being pissed at the other for dropping the ball on the Miles?? who knows??

I lost track of how many miles i had sent in- but i seriously doubt that many sent in more than I did- I maxed out every catalog and had to resort to setting up new names to place more orders for stuff. I estimate that I got $3000 worth gear retail priced. We even entered a rawing by Marlboro and won a Weber SS outdoor gas grill-$400 value-

Here is the search results for completed listings-- the green are the ones that sold- I will beat any price (including the ship) for items sold that I have..

http://www.ebay.com/csc/i.html?_sacat=0&_nkw=Marlboro+gear&LH_Complete=1&rt=nc

I have two of the REAL 'bristle' dart boards still in the box-comes in nice wooden wall mount box with a set of crappy darts-these are heavy so the shipping will not be cheap. Make offer..

Re: FS bunch of Hak's 'treasures'

jcranmer said:

PM sent on the clamp style meter.

Click to expand...

SOLD to Jcranmer

everal that look like this one are listed at ebay

here is just one...

Vintage Test Equipment Weston 253423 Clamp on AC Ammeter Voltmeter Multimeter | eBay

w/alligator clips I tested the VDC using 12v wallwart and it appears to be working fine.

For that it has three 'ranges' max of 150/300&600- so for low voltage it would not be an ideal meter. Weston has been in biz since the 1800s- they make lots of different meters and IIRC this one in NOT plastic ..its bakelite. The sticker on the back was from the pawn shop where my dad bought it- barely readable- it looks like they wanted $20 for it. I removed the sticker. The AC Amps has ranges or max-6/15/30/60150 & 300, making your own leads with plastic insulators clips should be easy..
here is another one - you can see the stock leads.

Vintage Weston Model 749 Clamp on Voltage AC Volt Ammeter 0 300 Vac with Case | eBay

Re: FS bunch of Hak's 'treasures'

HUGE thick lenses from early version RPTV- quite heavy- shipping will not be cheap-
you can calculate by using the weight in the pic(1299grams=2.9 lbs)- I have three of these- 10$ each- all three for 25$ they are not all the same (see the pics)

VINTAGE(nearly antique) BENJAMIN Air Rifle
Not the Holy Grail (worth ~$1000)first edition but def. from the '20s or '30s
repairable- muzzleloading- has somebodies initials scratched into the stock.

I will let it go here for $250- I CAN sell it on FeeBay as it is not working.
I have a photocopy of an ad for one like this. Just a real ad(1922) cut from prolly Pop. Mech. mag goes for 12$--the rifle in the ad went for 5$!!!
Ad claims it is unlike any other BB rifle as you can vary the power by the number of pumps.(one to six strokes)
" You can't have an accident with a Benjamin. Its safe always because you contol the power"<-- yeah--right!

Re: FS bunch of Hak's 'treasures'

[COLOR="Red"S O L D
[SIZE="3"]TO JAMES aka Dr Evil[/COLOR][/SIZE]


Here is a cool item-especailly if you drive 18 wheelers or own a PIT breed dog.
genuine Hood Ornament from a MACK truck.
There is some normal pitting in the chrome- you MAY be able to buff it away.
Comes with the base- to put on your hood you will new to find two bolts(SS may be good to get) the right size an drill some holes. Looks pretty good just sitting on a shelf.

Re: FS bunch of Hak's 'treasures'

Pete wants me to sell some lasers-- here you go..

From My private JL collection- Spec or above PLC 532/250mW
30 day warranty- return for FULL refund of purchase price.
Less than 1 hour on this JETLASERS PGL.
High quality IR filter-EZ smooth focusing - safety pin, shutter and key lockable.
VERY thin beam- swell divergence- one of the most successful lasers that JL has every sold-
If purchased before April 1ST buyer gets two 18650 batts and charger.
$250

(ORIGINALY Sold for $325 PLUS SHIP~$30)
When these went to closeout the price was dropped to $265 + 30$ to ship.

JL no longer offers these.