- Joined
- Mar 10, 2013
- Messages
- 2,918
- Points
- 113
Ok guys...got tons of stuff hanging out and about around my home that I don't need or don't have the time to fix or tinker with anymore, and I need money for the holidays like everyone else, and to keep bringing you guys treats to the forum. 
Lab lasers (and such fancy stuff) don't pay for themselves! These won't have pics right away, but for now I want to get this stuff listed along with some basic prices, but as always I take offers into consideration as long as you can back them up. Shipping is at-cost to me, rounded to the nearest dollar, and will be sent in the way you specify, or by default will be USPS priority mail. Free/included shipping applies only to USA for obvious reasons.
Coherent C215M-10 Lab Laser - VERY nice, VERY small laser. very lightly used, like new, outputting 12mW ish, so well over its minimum power spec (10mW), SLM 532nm low power green output with essentially a perfect beam profile, and slightly wide divergence allowing you to set it as you like with a positive lens. Great for calibrating your meter due to the low power and ultra-high stability. Also would perhaps make a great telescope guide or good for basic small hologram making. Comes complete with power supply, autostart jumpered so it runs as a desktop laser after applying power, but it also has an analog input if desired. Also note that this is the version with the nice long cable, not the short super tiny one everyone sells on ebay on the cheap.
- SOLD
675nm Diode laser - ultra stable
Melles Griot Super high quality 9mm 670-675nm laser diode with professional matched driver and optical feedback for super high stability in the deep red portion of the spectrum. Installed into a 501B host with a 3 element lens for low divergence and easy to maintenance due to being very modular. Output is adjustable to an extent up to about 22mW IIRC, factory setting is about 20mW-ish. I'd strongly recommend it be set there, but I'll adjust it as requested before shipping. makes a great long distance laser, and very stable and reliable, Beautiful deep cherry red color. Don't have 671nm, or need a super stable handheld? this is for you. Another great laser of known power for calibrating your LPM every few months.
$100 shipped.
Pre-Built Cyrpus copper magic pen host build chrome plated 120mW tested 450nm laser - Sold
Cyprus copper magic pen host chrome plated with focus knob (2xAAA size) - Sold
--------------------------------------------------------------------------------------------------
GAS:
Coherent Tropel 200
Tropel SLM stabilized HeNe laser, already adjusted, just needs a new tube. (see sam's FAQ it's not hard) I already pulled the old one even to make it easier and get the hard part out of the way. one of the feedback diodes popped off and I soldered it back on but not sure if the polarity is right so it may need to be reversed. (would give a negative reading, but no harm to the driver) but that's the only thing even remotely wrong with it. was working when I got it but the tube was a slow start, so I had to pull it as it was arcing to the heater ground. I fixed that too. A new tube and alignement and its good to go. Tube required is an LHR-120 (NOT AN LHP-120) they are pretty small and readily available from places like Meredeth instruments for fairly cheap. probably cost you a few hundred bucks between the parts and the tube for a several K $$$ SLM HeNe. Could potentially be a great deal for someone. Questions welcome after purchase if you need help.
$100 +shipping
LOR-006 tiny 612/633nm Orange/Red HeNe
Here's a rare treat. I happened across another one of these 6" ORANGE HeNe tubes. It's doing about 0.5mW just like my other tube, but is also a slight multiline! it intermittently spits small amounts of red too, and using a red ext. OC I can make it do 2 reds and an orange at the same time with the right mirror setup. NOS tube and it doesn't get any better! This is a VERY rare item. I will include clips and a 68K 3W ballast resistor with the tube. I know its expensive, but I really need the money, and this unique gem is easily worth it. Power supply available at request for additional charge
- $600 + shipping
Uniphase 1145P HeNe (21mW+ @ 6.5-7mA) - $300 + shipping
Uniphase 1145P HeNe lab-style laser supply (2500-4300VDC @ 6.5mA) Brand new HV supply installed - $400 + shipping unless bought with its laser head. great for making holograms!
LGR-120 HeNe Bare Tube 543.5nm 10" (0.5mW+) tested 0.7mW - $125 + shipping
Melles Griot LHR-201 Laser bare tube 14" (5mW+) tested doing about 8mW - $125 + shipping
HeNe tube clips - $1 per pair (or comes with a tube if you bought one that needs them)
68K 3W ballast MO resistors - $1 each
Also I have a small cylidrical Nd:YAP crystal available for $20
Argon Ion ML HR Mirrors 30cm RoC concave, 488-515nm? made for Uniphase Argon tubes. NOS
-$20 ea
-----------------------------------------------------------------------------------
I'd also like to mention that I've spoke with USF physics and they still have a few x56 441.6nm blue Omnichrome HeCds for sale they want to be rid of that need a home. I already have several so I offered to spread around the news to a few people, but I'll also mention it here just in case. they're asking $1K each, and while I know that's pretty pricey, they are complete with everything and brand new, working guaranteed. price is possibly negotiable, PM if interested with an offer!
I'll add more details at a later time/as I get requests and interest. Everything must go!
Lab lasers (and such fancy stuff) don't pay for themselves! These won't have pics right away, but for now I want to get this stuff listed along with some basic prices, but as always I take offers into consideration as long as you can back them up. Shipping is at-cost to me, rounded to the nearest dollar, and will be sent in the way you specify, or by default will be USPS priority mail. Free/included shipping applies only to USA for obvious reasons.Coherent C215M-10 Lab Laser - VERY nice, VERY small laser. very lightly used, like new, outputting 12mW ish, so well over its minimum power spec (10mW), SLM 532nm low power green output with essentially a perfect beam profile, and slightly wide divergence allowing you to set it as you like with a positive lens. Great for calibrating your meter due to the low power and ultra-high stability. Also would perhaps make a great telescope guide or good for basic small hologram making. Comes complete with power supply, autostart jumpered so it runs as a desktop laser after applying power, but it also has an analog input if desired. Also note that this is the version with the nice long cable, not the short super tiny one everyone sells on ebay on the cheap.
- SOLD
675nm Diode laser - ultra stable
Melles Griot Super high quality 9mm 670-675nm laser diode with professional matched driver and optical feedback for super high stability in the deep red portion of the spectrum. Installed into a 501B host with a 3 element lens for low divergence and easy to maintenance due to being very modular. Output is adjustable to an extent up to about 22mW IIRC, factory setting is about 20mW-ish. I'd strongly recommend it be set there, but I'll adjust it as requested before shipping. makes a great long distance laser, and very stable and reliable, Beautiful deep cherry red color. Don't have 671nm, or need a super stable handheld? this is for you. Another great laser of known power for calibrating your LPM every few months.
$100 shipped.
Pre-Built Cyrpus copper magic pen host build chrome plated 120mW tested 450nm laser - Sold
Cyprus copper magic pen host chrome plated with focus knob (2xAAA size) - Sold
--------------------------------------------------------------------------------------------------
GAS:
Coherent Tropel 200
Tropel SLM stabilized HeNe laser, already adjusted, just needs a new tube. (see sam's FAQ it's not hard) I already pulled the old one even to make it easier and get the hard part out of the way. one of the feedback diodes popped off and I soldered it back on but not sure if the polarity is right so it may need to be reversed. (would give a negative reading, but no harm to the driver) but that's the only thing even remotely wrong with it. was working when I got it but the tube was a slow start, so I had to pull it as it was arcing to the heater ground. I fixed that too. A new tube and alignement and its good to go. Tube required is an LHR-120 (NOT AN LHP-120) they are pretty small and readily available from places like Meredeth instruments for fairly cheap. probably cost you a few hundred bucks between the parts and the tube for a several K $$$ SLM HeNe. Could potentially be a great deal for someone. Questions welcome after purchase if you need help.
$100 +shipping
LOR-006 tiny 612/633nm Orange/Red HeNe
Here's a rare treat. I happened across another one of these 6" ORANGE HeNe tubes. It's doing about 0.5mW just like my other tube, but is also a slight multiline! it intermittently spits small amounts of red too, and using a red ext. OC I can make it do 2 reds and an orange at the same time with the right mirror setup. NOS tube and it doesn't get any better! This is a VERY rare item. I will include clips and a 68K 3W ballast resistor with the tube. I know its expensive, but I really need the money, and this unique gem is easily worth it. Power supply available at request for additional charge
- $600 + shipping
Uniphase 1145P HeNe (21mW+ @ 6.5-7mA) - $300 + shipping
Uniphase 1145P HeNe lab-style laser supply (2500-4300VDC @ 6.5mA) Brand new HV supply installed - $400 + shipping unless bought with its laser head. great for making holograms!
LGR-120 HeNe Bare Tube 543.5nm 10" (0.5mW+) tested 0.7mW - $125 + shipping
Melles Griot LHR-201 Laser bare tube 14" (5mW+) tested doing about 8mW - $125 + shipping
HeNe tube clips - $1 per pair (or comes with a tube if you bought one that needs them)
68K 3W ballast MO resistors - $1 each
Also I have a small cylidrical Nd:YAP crystal available for $20
Argon Ion ML HR Mirrors 30cm RoC concave, 488-515nm? made for Uniphase Argon tubes. NOS
-$20 ea
-----------------------------------------------------------------------------------
I'd also like to mention that I've spoke with USF physics and they still have a few x56 441.6nm blue Omnichrome HeCds for sale they want to be rid of that need a home. I already have several so I offered to spread around the news to a few people, but I'll also mention it here just in case. they're asking $1K each, and while I know that's pretty pricey, they are complete with everything and brand new, working guaranteed. price is possibly negotiable, PM if interested with an offer!
I'll add more details at a later time/as I get requests and interest. Everything must go!
Last edited:
