- Joined
- May 11, 2007
- Messages
- 220
- Points
- 0
Re: Teenie Burner $45 **SOLD** More soon!
wow! Those look pretty sharp.
wow! Those look pretty sharp.
LPF Donation via Stripe | LPF Donation - Other Methods
Links below open in new window
ArcticMyst Security by Avery
Teenie Burner $50 More Available now!!
- Thread starter Kenom
- Start date
- Joined
- Nov 24, 2007
- Messages
- 2,735
- Points
- 0
Re: Teenie Burner $45 **SOLD** More soon!
That is freakin' sexy 
Are you seriously not willing to sell these hosts?
At least PM me with the part number...
Kenom said:I just ordered another four of these hosts. I have them in two colors. grey anodized, and blue metalic anodized. 2 of each.
Are you seriously not willing to sell these hosts?
At least PM me with the part number...
Kenom
0
- Joined
- May 4, 2007
- Messages
- 5,629
- Points
- 63
Re: Teenie Burner $45 **SOLD** More soon!
only the 2 blue one's are available. I'll be ordering more in a few days.
only the 2 blue one's are available. I'll be ordering more in a few days.
diachi
0
- Joined
- Feb 22, 2008
- Messages
- 9,700
- Points
- 113
Re: Teenie Burner $45 **SOLD** More soon!
I also have one of these hosts, they are quite nice. I can easily get more. They are good torches too
Kenom said:I just ordered another four of these hosts. I have them in two colors. grey anodized, and blue metalic anodized. 2 of each.
I also have one of these hosts, they are quite nice. I can easily get more. They are good torches too
- Joined
- May 11, 2007
- Messages
- 220
- Points
- 0
Re: Teenie Burner $45 **SOLD** More soon!
Kenom, will you be making more of these?
Kenom, will you be making more of these?
Kenom
0
- Joined
- May 4, 2007
- Messages
- 5,629
- Points
- 63
Re: Teenie Burner $45 **SOLD** More soon!
You bet should be here in a few days. First come first serve.
I've only got the blue one's left for now.
Ken
You bet should be here in a few days. First come first serve.
I've only got the blue one's left for now.
Ken
- Joined
- Feb 29, 2008
- Messages
- 2,344
- Points
- 0
Re: Teenie Burner $45 **SOLD** More soon!
I have a question. If red diodes need 3v, and the three 1.5 batteries make 4.5v, won't that damage the diode no matter how much current goes through it?
Thanks
I have a question. If red diodes need 3v, and the three 1.5 batteries make 4.5v, won't that damage the diode no matter how much current goes through it?
Thanks
daguin
0
- Joined
- Mar 29, 2008
- Messages
- 15,989
- Points
- 113
Re: Teenie Burner $45 **SOLD** More soon!
I bought mine as a birthday "gift," for Kenom, but I'm the one who got the present
I use a single 10180 in mine. It is freakin' awesome. It puts out 185mW from a truly pocket sized host
I've already had to recharge the battery once and I'm NOT a "burner" I light it just to be amazed again by the unreal amount of light coming from this tiny host.
Peace,
dave
robjdixon said:
I bought mine as a birthday "gift," for Kenom, but I'm the one who got the present
I use a single 10180 in mine. It is freakin' awesome. It puts out 185mW from a truly pocket sized host
I've already had to recharge the battery once and I'm NOT a "burner" I light it just to be amazed again by the unreal amount of light coming from this tiny host.
Peace,
dave
- Joined
- Feb 29, 2008
- Messages
- 2,344
- Points
- 0
Re: Teenie Burner $45 **SOLD** More soon!
Yeah i might buy one soon, but the voltage thing holds me back a little. It is probably a simple misunderstanding on my account though. :
Yeah i might buy one soon, but the voltage thing holds me back a little. It is probably a simple misunderstanding on my account though. :
Kenom
0
- Joined
- May 4, 2007
- Messages
- 5,629
- Points
- 63
Re: Teenie Burner $45 **SOLD** More soon!
Voltage is irrelevant. current is what's important. the diode is only going to pull the voltage it needs but the current has to be either regulated or a small amount. This is accomplished with the batteries. Since they are so small, they don't have much current.
When I first popped that 10180 battery into it, I truly expected it to die! but when it didn't and I saw over 200mw, it blew my freakin mind!!!
Voltage is irrelevant. current is what's important. the diode is only going to pull the voltage it needs but the current has to be either regulated or a small amount. This is accomplished with the batteries. Since they are so small, they don't have much current.
When I first popped that 10180 battery into it, I truly expected it to die! but when it didn't and I saw over 200mw, it blew my freakin mind!!!
- Joined
- May 11, 2007
- Messages
- 220
- Points
- 0
Re: Teenie Burner $45 **SOLD** More soon!
Will the laser last long with the 10180 in it? couldn't it die?
Will the laser last long with the 10180 in it? couldn't it die?
Kenom
0
- Joined
- May 4, 2007
- Messages
- 5,629
- Points
- 63
Re: Teenie Burner $45 **SOLD** More soon!
I honestly don't know. I havn't managed to test the current that is being pumped from this little battery. What I do know is that it is possible to on a fresh charge but you'd have to ask daguin about it since he's actually put a fresh 10180 into his.
I honestly don't know. I havn't managed to test the current that is being pumped from this little battery. What I do know is that it is possible to on a fresh charge but you'd have to ask daguin about it since he's actually put a fresh 10180 into his.
Kenom
0
- Joined
- May 4, 2007
- Messages
- 5,629
- Points
- 63
Re: Teenie Burner $45 **SOLD** More soon!
only one blue host remaining
only one blue host remaining
daguin
0
- Joined
- Mar 29, 2008
- Messages
- 15,989
- Points
- 113
Re: Teenie Burner $45 **SOLD** More soon!
Anything COULD die. It pulls just over 190mA with a freshly charged 10180. The spot even shows the "line" through the dot of high powered reds!
When the battery sags to 3V the laser goes dark. It actually drains the battery fairly quickly, but they recharge quickly as well. I do what I normally do. I have two batteries for it. While I'm charging one, I'm using the other.
Peace,
dave
TacomanMcjab said:
Anything COULD die. It pulls just over 190mA with a freshly charged 10180. The spot even shows the "line" through the dot of high powered reds!
When the battery sags to 3V the laser goes dark. It actually drains the battery fairly quickly, but they recharge quickly as well. I do what I normally do. I have two batteries for it. While I'm charging one, I'm using the other.
Peace,
dave
- Joined
- Nov 6, 2008
- Messages
- 866
- Points
- 18
Re: Teenie Burner $45 **SOLD** More soon!
where do i get the batteries for this?
where do i get the batteries for this?
daguin
0
- Joined
- Mar 29, 2008
- Messages
- 15,989
- Points
- 113
Re: Teenie Burner $45 **SOLD** More soon!
The button batteries (LR-44) can be found at many places that carry button batteries. They are used in many "normal" applications.
The 10180's must be bought online. Here's one source:
http://www.lighthound.com/AW-10180-Unprotected-Rechargeable-Lithium-Battery_p_20-92.html
I recharge them in the same charger that I use for the rest of my 3.7V batteries. I just use a series of rare earth magnets as spacers to make the connection.
Peace,
dave
DayOfShadows said:
The button batteries (LR-44) can be found at many places that carry button batteries. They are used in many "normal" applications.
The 10180's must be bought online. Here's one source:
http://www.lighthound.com/AW-10180-Unprotected-Rechargeable-Lithium-Battery_p_20-92.html
I recharge them in the same charger that I use for the rest of my 3.7V batteries. I just use a series of rare earth magnets as spacers to make the connection.
Peace,
dave
