- Joined
- Jul 4, 2008
- Messages
- 2,036
- Points
- 48
So, for sale is a jayrob 18650 445nm laser. I'm putting just the laser and battery out there for $220. I don't have a meter, but at this current it should be putting out around 1.2 watts. It includes
Copper heatsink (better than aluminum)
Aixiz 445 lens
Maxed out microboost-well heatsinked
An AW protected 18650 battery, 2600mAh-the best you can get, these cost around $20 shipped on their own.
The beam is spectacular, and the laser feels very nice. It's my favorite laser that I own by far, the power is just incredible. Recommended duty cycle is 30 seconds on, 1 minute off due to the high power output. It gets hot if pushed much harder. Obviously it can burn things, there are a few videos on youtube of it lighting a firework and setting magazine paper on fire. Say something if you want to see them.
pictures:
Here is the laser, as well as a very underexposed beam shot (normal exposure blinded the camera) and I tried to take a dot picture at 10 feet, but I couldn't get it to not blind the camera. Suffice it to say the beam is still small enough to smoke plastic at 10' when well focused.
As well as some options.
Focalprice goggles+free microfiber-$8 (these have a few melted spots on them where I tested the goggles to make sure I trusted them)
18650 charger-$5 (this came from o-like)
lens cleaning solution-$7 (I love this stuff, it smells good too)
There are some minor blemishes, I don't know if you can see them on camera-right on the inside edge of the front bezel, there's a little anodizing missing. Same goes for the parts where the battery tube widens up for the head and tailcap. It's really very minor.
Shipping to USA is free, I will ship insured for the whole purchase price and with delivery confirmation. I usually end up shipping the day of or day after payment, unless of course it's a sunday.
Fine print:
Due to the moddable nature of this product, I can only guarantee that I will ship the laser working, and what you see is what you get. If, somehow, the laser manages to break during shipping (very unlikely), it is up to you to prove to USPS that it did so and collect the insurance money. I will not accept returns. My reputation should speak for itself, I've never had an incident with an unsatisfied buyer before. I am not responsible for any damage to health or property due to this laser, once I ship the laser the responsibility lies with you. You must make 100% sure it is legal to own and use the laser in your area, and assume responsibility for any legal issues do to misuse. THIS IS NOT A LASER POINTER. It is a high-powered laser, and should not be used for presentations, general pointing, etc. Eye protection should always be used, and the quality of eye protection is up to you. I reserve the right to refuse sale to people I feel might misuse the laser.
The costs listed are with paypal "gift" payment. If you choose to pay for it by some means other than "gift", please add 3% to the purchase price.
PM me or post with any questions, I'm happy to answer.
Copper heatsink (better than aluminum)
Aixiz 445 lens
Maxed out microboost-well heatsinked
An AW protected 18650 battery, 2600mAh-the best you can get, these cost around $20 shipped on their own.
The beam is spectacular, and the laser feels very nice. It's my favorite laser that I own by far, the power is just incredible. Recommended duty cycle is 30 seconds on, 1 minute off due to the high power output. It gets hot if pushed much harder. Obviously it can burn things, there are a few videos on youtube of it lighting a firework and setting magazine paper on fire. Say something if you want to see them.
pictures:
Here is the laser, as well as a very underexposed beam shot (normal exposure blinded the camera) and I tried to take a dot picture at 10 feet, but I couldn't get it to not blind the camera. Suffice it to say the beam is still small enough to smoke plastic at 10' when well focused.
As well as some options.
Focalprice goggles+free microfiber-$8 (these have a few melted spots on them where I tested the goggles to make sure I trusted them)
18650 charger-$5 (this came from o-like)
lens cleaning solution-$7 (I love this stuff, it smells good too)
There are some minor blemishes, I don't know if you can see them on camera-right on the inside edge of the front bezel, there's a little anodizing missing. Same goes for the parts where the battery tube widens up for the head and tailcap. It's really very minor.
Shipping to USA is free, I will ship insured for the whole purchase price and with delivery confirmation. I usually end up shipping the day of or day after payment, unless of course it's a sunday.
Fine print:
Due to the moddable nature of this product, I can only guarantee that I will ship the laser working, and what you see is what you get. If, somehow, the laser manages to break during shipping (very unlikely), it is up to you to prove to USPS that it did so and collect the insurance money. I will not accept returns. My reputation should speak for itself, I've never had an incident with an unsatisfied buyer before. I am not responsible for any damage to health or property due to this laser, once I ship the laser the responsibility lies with you. You must make 100% sure it is legal to own and use the laser in your area, and assume responsibility for any legal issues do to misuse. THIS IS NOT A LASER POINTER. It is a high-powered laser, and should not be used for presentations, general pointing, etc. Eye protection should always be used, and the quality of eye protection is up to you. I reserve the right to refuse sale to people I feel might misuse the laser.
The costs listed are with paypal "gift" payment. If you choose to pay for it by some means other than "gift", please add 3% to the purchase price.
PM me or post with any questions, I'm happy to answer.
Attachments
Last edited:
