Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

For Sale: Xenon Plasma Electrodeless Discharge Tube

Joined
Dec 11, 2011
Messages
4,364
Points
83
Hello everyone!

In order to replenish my R&D budget for Electronics and Tesla Coil endeavors I have to let go of some things I just don't need and don't use any more.

For sale is one 500ml flask type electrodeless discharge tube, filled with Xenon gas and trace Nitrogen/Oxygen. This tube was made by TeslaCoil.ru and has his emblem and website engraved on the exterior of the tube. There are imperfections in the tube wall, but they're all cosmetic as they are all on the interior surface and do not affect operation. The discharge is a greenish white color, with white diffuse glow in areas of high ion density. Additionally, there are some remnants of whatever contamination was inside the tube. Running the tube effectively "burnt up" the contaminants and they formed a soot that lightly coated some of the internal area of the tube. That is why the glass looks dirty.

A high frequency AC power supply is required to operate the tube; NSTs and other similar 50/60Hz transformers will not work, nor will a standard DC flyback transformer. AC (diode-less) flyback transformers or power supplies from cheap plasma globes should work though. Best results are obtained when using a Solid State Tesla Coil or Vacuum Tube Tesla Coil, but all types of Tesla Coil will work. Care must be taken to never let a spark/streamer/arc or the HV terminal come in direct contact with the tube, as this can damage the tube and allow air in. Likewise, it is fragile glass with a partial vacuum inside, and should be handled accordingly.

Price: $60 + $15 shipping.
Payment: PayPal only.

Note: I will ship overseas but buyer must pay additional shipping charges.

I bought this for over $115 + shipping and they were far easier to get ahold of then than they are now. You won't find these on the open market anymore as 2 of the three makers in the world has shut down sales. If you want an electrodeless discharge tube you had better be prepared to know an inside source and commission the work custom, and that is $$$. I offer this tube so cheaply because of the cosmetic issues.

0ynk.jpg


k5gp.jpg


mre1.jpg


8rn0.jpg


no1g.jpg


 
Last edited:





Joined
Mar 23, 2011
Messages
2,095
Points
63
Re: Xenon Plasma Electrodeless Discharge Tube

Very interesting tube. Too bad I don't have a power source for it or I would take it off your hands. I do have a couple of cheap plasma globes that might work I suppose, but what I really need is a TC. :D
 
Joined
Dec 11, 2011
Messages
4,364
Points
83
I know several people who run similar tubes using the power supply from old plasma globes; they wrap one end of the tube in aluminium foil and attach the plasma globe driver output to that. Fine mesh works great too.

But yes, what you do need is a Tesla Coil! Perhaps a project you should consider undertaking? >.> :whistle:
 




Top