Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

Presale: "Just Add Diode" Kits






tsteele93

tsteele93

0
Joined
Dec 27, 2011
Messages
2,062
Points
48
So here is what I decided...

428mA, 478mA, 1.8A

I'm thinking that I will use the 428mA with an LPC-826 red (I'm assuming that is better than LPC-815 or LPC-836)

The 478mA is going to be paired with a DTR 700mW 12X 405nm S06J Blu-Ray Laser Diode which he recommends keeping under 500mA.

And of course the 1.8A will be used with DTR's M140 445nm 1.5-2W Blue Laser Diode. I wonder if I would be smarter at 1.62A, but I've decided to try 1.8A and see if I can heat sink it.

I had to do some really fast scrambling to try and learn enough to put together a decent list. Hopefully I didn't aim too high...

ts
 
cheech226

cheech226

0
Joined
Jun 25, 2011
Messages
1,481
Points
63
hey moh,

i ordered a 1.8A driver from you that hasn't been seen since memphis according to tracking. tried pm'ing you, i know you're busy bro, did you get the pm?
 
Last edited:
Mohrenberg

Mohrenberg

0
Joined
Aug 30, 2008
Messages
6,891
Points
83
I remember reading it, i just forgot to respond and forgot all about it. If the tracking hasn't changed since the 13th, then it's surely lost. I can do a refund or send you a new one out in the morning. just let me know.
Also sending you a PM.
 
Mohrenberg

Mohrenberg

0
Joined
Aug 30, 2008
Messages
6,891
Points
83
Hosts were purchased last night. I'm going to start getting everything ready.

Nosebleed,let me get back to you. If I get a few extra Heatsinks made ill let you get one. Otherwise it'll have to wait until I get back from Florida
 
Kyosama66

Kyosama66

0
Joined
Mar 14, 2011
Messages
87
Points
8
My 405 C6 got so many gawkers, I might have to make a 445 and really blow everyone away. Seriously, you make lasers so easy with these kits.
 
Last edited:
GAtkins

GAtkins

0
Joined
Nov 19, 2011
Messages
294
Points
0
@Kyosama66, what driver and specs do you have behind your 405?

Thanks.

Glenn
 
Kyosama66

Kyosama66

0
Joined
Mar 14, 2011
Messages
87
Points
8
GAtkins said:
@Kyosama66, what driver and specs do you have behind your 405?

Thanks.

Glenn
Click to expand...

I'm just using a Mohrenberg driver at 428mA. It's not pushing too hard, but I get great battery life even with cheap 16340's. It will still start to melt a hole in an alarm clock from about 8 feet away if you're not careful... Oops.

And yes, it's a 12x S06J diode.
 
Last edited:
Mohrenberg

Mohrenberg

0
Joined
Aug 30, 2008
Messages
6,891
Points
83
Kyosama66 said:
Put me down in the "leftovers" category. My 405 C6 got so many gawkers, I might have to make a 445 and really blow everyone away. Seriously, you make lasers so easy with these kits.
Click to expand...

Thanks! I try to make them obtainable without breaking the wallet.
 
Kyosama66

Kyosama66

0
Joined
Mar 14, 2011
Messages
87
Points
8
Well, just let me know if you've got any extras so I can get some money off to you ASAP.
 
Last edited:
Mohrenberg

Mohrenberg

0
Joined
Aug 30, 2008
Messages
6,891
Points
83
478mA okay?

btw, Just got word earlier today that the hosts shipped out on Feb 3rd. Should have them in the middle of this coming week I hope.

DHL tracking # 8958519452 for those who are interested.
 
You must log in or register to reply here.




Top