Speedy78
0
- Joined
- Dec 17, 2012
- Messages
- 2,081
- Points
- 63
Re: Pre-Sale: The MS-Envy - 18650 Custom Host
Let me shoot him a pm real quick and clear it up.
Let me shoot him a pm real quick and clear it up.
LPF Donation via Stripe | LPF Donation - Other Methods
Links below open in new window
ArcticMyst Security by Avery
NEW STOCK: The MS-Envy - 18650 Custom Laser Host
- Thread starter sinner
- Start date
Speedy78
0
- Joined
- Dec 17, 2012
- Messages
- 2,081
- Points
- 63
Re: Pre-Sale: The MS-Envy - 18650 Custom Host
Ok cleared up. Its coming to me.
Ok cleared up. Its coming to me.
- Joined
- Feb 10, 2013
- Messages
- 2,125
- Points
- 63
Re: Pre-Sale: The MS-Envy - 18650 Custom Host
I am offering custom builds with this host as well. I'll be happy to use any diode/driver/battery configuration that somebody would like to use.
I am offering custom builds with this host as well. I'll be happy to use any diode/driver/battery configuration that somebody would like to use.
sinner
0
- Joined
- Oct 27, 2011
- Messages
- 2,565
- Points
- 83
Re: Pre-Sale: The MS-Envy - 18650 Custom Host
SBA Lasers - High-End Custom Builds , Is also the official distributor for Magic Sticks in the US. :wave:
P.S: Adding this info on the OP. For Pricing PM or Post your interest :thanks:
SBA Lasers - High-End Custom Builds , Is also the official distributor for Magic Sticks in the US. :wave:
P.S: Adding this info on the OP. For Pricing PM or Post your interest :thanks:
Last edited:
- Joined
- Apr 19, 2013
- Messages
- 2,246
- Points
- 63
Re: Pre-Sale: The MS-Envy - 18650 Custom Host
I'm really happy with my 520 SSW from SBA and Sinner :beer: An Amazing host and solid build. SBA communicates frequently and always stands by his work. Sorry I haven't posted my review yet, but I'll have something special, up this weekend
Once the I "C" Red contest is over, I'll be talking to you and SBA, Sinner. Hopefully I'll be able to get my hands on one of these exotic diodes floating around to go into one of your new hosts :thinking:
~ LB
I'm really happy with my 520 SSW from SBA and Sinner :beer: An Amazing host and solid build. SBA communicates frequently and always stands by his work. Sorry I haven't posted my review yet, but I'll have something special, up this weekend
Once the I "C" Red contest is over, I'll be talking to you and SBA, Sinner. Hopefully I'll be able to get my hands on one of these exotic diodes floating around to go into one of your new hosts :thinking:
~ LB
Last edited:
sinner
0
- Joined
- Oct 27, 2011
- Messages
- 2,565
- Points
- 83
Re: Pre-Sale: The MS-Envy - 18650 Custom Host
Sweet.. I'll keep an eye out for the review :beer: I'd love to see the duty cycle
(24h On/ 0h Off) :na:
Jokes apart, I have been designing a host for bloompyle, I do have C-Mount Heatsink Designed and Lens Barrel made, Just need some fine adjustments and Will start making a batch of 2-3 hosts.. 2x26650 sized, Copper Head C-Mount! :beer:
Sweet.. I'll keep an eye out for the review :beer: I'd love to see the duty cycle
(24h On/ 0h Off) :na:
Jokes apart, I have been designing a host for bloompyle, I do have C-Mount Heatsink Designed and Lens Barrel made, Just need some fine adjustments and Will start making a batch of 2-3 hosts.. 2x26650 sized, Copper Head C-Mount! :beer:
- Joined
- Apr 19, 2013
- Messages
- 2,246
- Points
- 63
Re: Pre-Sale: The MS-Envy - 18650 Custom Host
Thanks Sinner, I've been waiting for that
The Duty cycle? :crackup: I haven't needed to recharge the batteries yet The 520 diode SBA got is an amazing wavelength too. Great work from both of you.
~ LB
Thanks Sinner, I've been waiting for that
The Duty cycle? :crackup: I haven't needed to recharge the batteries yet
The 520 diode SBA got is an amazing wavelength too. Great work from both of you. ~ LB
- Joined
- Feb 10, 2013
- Messages
- 2,125
- Points
- 63
Re: Pre-Sale: The MS-Envy - 18650 Custom Host
Thanks, both, gentlemen! It's a pleasure to work with the both of you.
In regards to our 520nm, 100mW SSWs, according to my calculations, whilst using our 4000mAh 26650s, the duty cycle AND charge cycle is approximately 27 hours! :wave:
I've not yet tested this...no need to burn through so much diode time in one sitting. :beer:
Thanks, both, gentlemen! It's a pleasure to work with the both of you.
In regards to our 520nm, 100mW SSWs, according to my calculations, whilst using our 4000mAh 26650s, the duty cycle AND charge cycle is approximately 27 hours! :wave:
I've not yet tested this...no need to burn through so much diode time in one sitting. :beer:
Last edited:
- Joined
- Sep 22, 2010
- Messages
- 1,358
- Points
- 48
Re: Pre-Sale: The MS-Envy - 18650 Custom Host
Yeah that'd be great. Thanks to this lovely heatwave my net connection has been up and down or I'd have replied sooner. Now I just need to hunt down a spring board for it to connect my driver to.
Pre-Sale ends in 4 days
Yeah that'd be great. Thanks to this lovely heatwave my net connection has been up and down or I'd have replied sooner. Now I just need to hunt down a spring board for it to connect my driver to.
sinner
0
- Joined
- Oct 27, 2011
- Messages
- 2,565
- Points
- 83
Re: Pre-Sale: The MS-Envy - 18650 Custom Host
I have included one, carefully cut to size and pressed in the pill with + & - wired up.. It was a 14mm Round contact board cant seem to find one so i had to cut round pieces of veroboard to make my own.. So im sure theres no need to use any other parts than a driver and a diode module, and offcourse batteries..
I have included one, carefully cut to size and pressed in the pill with + & - wired up.. It was a 14mm Round contact board cant seem to find one so i had to cut round pieces of veroboard to make my own.. So im sure theres no need to use any other parts than a driver and a diode module, and offcourse batteries..
- Joined
- Sep 22, 2010
- Messages
- 1,358
- Points
- 48
Re: Pre-Sale: The MS-Envy - 18650 Custom Host
Awesome! Now I just need to do is decide which diode combo to get from DTR and (try to) wait patiently for everything to arrive.
Awesome! Now I just need to do is decide which diode combo to get from DTR and (try to) wait patiently for everything to arrive.
Speedy78
0
- Joined
- Dec 17, 2012
- Messages
- 2,081
- Points
- 63
Re: Pre-Sale: The MS-Envy - 18650 Custom Host
515nm going in mine When do we pay?
515nm going in mine
When do we pay?
sinner
0
- Joined
- Oct 27, 2011
- Messages
- 2,565
- Points
- 83
Re: Pre-Sale: The MS-Envy - 18650 Custom Host
Whenever it is convenient for you, I'll start shipping orders monday-tuesday!
Whenever it is convenient for you, I'll start shipping orders monday-tuesday!
Speedy78
0
- Joined
- Dec 17, 2012
- Messages
- 2,081
- Points
- 63
Re: Pre-Sale: The MS-Envy - 18650 Custom Host
Ah ok shoot me your pp info and price in a pm and ill do it tomorrow when I get on my pc.
Ah ok shoot me your pp info and price in a pm and ill do it tomorrow when I get on my pc.
sinner
0
- Joined
- Oct 27, 2011
- Messages
- 2,565
- Points
- 83
Re: Pre-Sale: The MS-Envy - 18650 Custom Host
Sounds great :beer:
PM Sent..
Sounds great :beer:
PM Sent..
- Joined
- Sep 22, 2010
- Messages
- 1,358
- Points
- 48
Re: Pre-Sale: The MS-Envy - 18650 Custom Host
LOL suppose I should pay for mine too since I bought the diode and driver that's going into it last night. Can you PM me payment info and I'll get it sent off either tonight or tomorrow after work.
Now let's see if I can manage to not power up that 520 diode before getting the host. Survey says.... "highly unlikely".
LOL suppose I should pay for mine too since I bought the diode and driver that's going into it last night. Can you PM me payment info and I'll get it sent off either tonight or tomorrow after work.
Now let's see if I can manage to not power up that 520 diode before getting the host. Survey says.... "highly unlikely".
