MXDL host with heatsink & flexdrive - $25

Lol who won the laser anyway?

thats what i wanna know!

I got it, but you read my post where I said I would take it if you didn't already get it... Which I wrote from the beginning...

As to why he sent it to me... probably because he wanted another Pocket Mini kit, and we traded, plus the difference.

But I want to mention that it is not a FlexDrive. It is a rkcstr driver.

For me, the draw was the FlexDrive! Because I use them in most of my 'Hot' option kits and personal builds. But it's ok that it wasn't a FlexDrive, because I sold a kit at the same time...

But also, I will offer the host/heatsink/rkcstr driver/3 X 10440 batteries to you if you want for $25 dollars. But you would have to pay $6 dollars shipping from me. Since on the trade deal I would be out my shipping, PayPal fees, and packaging by shipping it to you... (I tested the driver and it is working and adjusting great. I have not tested the batteries, you would get them just as I did)

This offer is only to you, bobhaha. (since you had said you'll take it before me) And Crossfire said he would pay my $6 dollars shipping... If I don't hear from you by Tuesday the 15th, then the deals off. Fair enough?

Thank you for your honesty and helpfulness.. I'm just abit confused atm.. so you send it to me.. as it is stated in the first post in this thread. except its a rckstr driver not a flexdrive is that correct??

BTW you know I dont live in the USA.. happy to pay postage! (its around $6 right?)

Yes, in this case, I would send you the host, heatsink, rkcstr driver, and 3 X 10440 batteries.

Everything that I received except for the dead diode that I removed because I wanted to test the driver. Which is working perfectly.

I did not test the batteries though. But you will receive the exact batteries that were sent me.

One other thing. The host was missing the black rubber seal that holds the heatsink solid. (with the final retaining ring of the host) It had a yellow plastic ring instead that I didn't like the look of. So I will offer to make a custom heatsink that will fit without using a rubber seal.

So you will get your choice of a version 1, or version 2 heatsink style. See here for the difference in looks:
http://laserpointerforums.com/laser_pointer_forums_3/forum/showthread.php?t=22512

The total will be $31 dollars shipped. But because you are out of the U.S. You will assume responsibility. I will mark the package as a 'gift', with a description of 'LED Flashlight', and a value of $15 dollars.

This offer is good until Tuesday, 9/15.

PM me for payment if you want...

version 2 is nice! but would the current heatsink work, with a full axis module? other then the look of it, is there any thing wrong with it? otherwise im happy with version 2 heatsink (if that allows enough room for full aixis!

pm me with payment details and info!

There is nothing wrong with the current heatsink, but the host is missing a black rubber o-ring type of seal which is needed for the heatsink to fit tight.

So I will make you a custom version 2 heatsink that will fit this host without the need of the missing rubber seal.

And yes... this host has plenty of room for a full length AixiZ module even with a version 2 heatsink. There is about 40mm's length between the top of a version 2 heatsink, and the bottom of the pill.

Sending PM...

Got it! thank you for your help!!

ok payment sent! check your PM for details! thanks crossfire and jayrob, you have been great helps!

-Adrian

Wait, I'm confused. Is this the MXDL type that Mohrenberg was going to sell, or the 4171/3405?

silver 3405

Oh, ok. I thought they only came in black