andy_con
0
- Joined
- May 24, 2007
- Messages
- 3,394
- Points
- 0
(indeed not a mirror mount) this was just a 5.6mm diode holder i made for testing stuff, threaded with 9x0.5 thread. so all aixiz and olike lens will fit. two m3 holes are tapped in the bottom for mounting.
if no one wants it ill just bin it.
35mm high x 16mm wide x 20mm deep including screws. beam height 15mm
£5 + postage
3x home made mirror mounts, bit rough round the edges but work perfect.
25mm high x 11mm wide x 25mm deep not including screws
mirror mounting height between 10-25mm high
£8 each + postage
3x adjustable mirror mounts, 0.9mm and 1.5mm allen key needed to adjust these mounts
17mm high x 11mm wide x 20mm deep
mirror mounting height between 8mm and 17mm high
£10 each + postage
9x of the above mirror mounts for sale but the holes are not tapped. so you will need an m2 tap.
17mm high x 11mm wide x 20mm deep
mirror mounting height between 8mm and 17mm high
£8 each which is what it cost me to have them made + postage
if no one wants it ill just bin it.
35mm high x 16mm wide x 20mm deep including screws. beam height 15mm
£5 + postage
3x home made mirror mounts, bit rough round the edges but work perfect.
25mm high x 11mm wide x 25mm deep not including screws
mirror mounting height between 10-25mm high
£8 each + postage
3x adjustable mirror mounts, 0.9mm and 1.5mm allen key needed to adjust these mounts
17mm high x 11mm wide x 20mm deep
mirror mounting height between 8mm and 17mm high
£10 each + postage
9x of the above mirror mounts for sale but the holes are not tapped. so you will need an m2 tap.
17mm high x 11mm wide x 20mm deep
mirror mounting height between 8mm and 17mm high
£8 each which is what it cost me to have them made + postage