- Joined
- Dec 4, 2016
- Messages
- 197
- Points
- 43
Bump! this pumping chamber is still on sale! https://www.ebay.com/itm/K301V-YAG-...m=112982983816&_trksid=p2047675.c100011.m1850
LPF Donation via Stripe | LPF Donation - Other Methods
Links below open in new window
ArcticMyst Security by Avery
K301V 125W CW Nd:YAG pumping chamber for sale
- Thread starter Laserbuilder
- Start date
- Joined
- Dec 4, 2016
- Messages
- 197
- Points
- 43
Bump!
- Joined
- Dec 4, 2016
- Messages
- 197
- Points
- 43
The pumping chamber is still on sale on e-bay. https://www.ebay.com/itm/K301V-YAG-...h=item1a4e4f8488:g:MBcAAOSwmcBa8v43:rk:3:pf:0
Also I want to add for sale some custom made low pressure mercury lamps, that had been made by my fellow glassblower. They are also listed on e-bay here: https://www.ebay.com/itm/Low-pressu...=item1a60585541:g:418AAOSwj6lbs-rv:rk:30:pf:0
Price is 15$ for each, 9 lamps available. You will save a lot on shipping if you buy at least 2-3 of them.
For sale is the low pressure low intensity mercury lamp that has the following specifications:
Dimensions 200mm length, 15mm dia,
Operating voltage 1200-1500V DC
Operating current 1-2 mA DC.
Envelope material: Soda lime glass.
Expected lifetime -- 1000 hours or more.
The output spectrum is VISIBLE ONLY. No UV light, it is blocked by the envelope.
The lamp can be used as a source of calibration spectrum with narrow line width for calibrating spectrometers, testing and control of optical surfaces quality or any other purpose where a source of visible mercury spectrum is needed. The best way to power it is to use a line voltage multiplier with a ballasting resistor. Note, that the starting voltage is at least 1.5-2 times higher than operating voltage.
Also I want to add for sale some custom made low pressure mercury lamps, that had been made by my fellow glassblower. They are also listed on e-bay here: https://www.ebay.com/itm/Low-pressu...=item1a60585541:g:418AAOSwj6lbs-rv:rk:30:pf:0
Price is 15$ for each, 9 lamps available. You will save a lot on shipping if you buy at least 2-3 of them.
For sale is the low pressure low intensity mercury lamp that has the following specifications:
Dimensions 200mm length, 15mm dia,
Operating voltage 1200-1500V DC
Operating current 1-2 mA DC.
Envelope material: Soda lime glass.
Expected lifetime -- 1000 hours or more.
The output spectrum is VISIBLE ONLY. No UV light, it is blocked by the envelope.
The lamp can be used as a source of calibration spectrum with narrow line width for calibrating spectrometers, testing and control of optical surfaces quality or any other purpose where a source of visible mercury spectrum is needed. The best way to power it is to use a line voltage multiplier with a ballasting resistor. Note, that the starting voltage is at least 1.5-2 times higher than operating voltage.
