- Joined
- May 4, 2009
- Messages
- 5,443
- Points
- 113
I have a limited supply of Groove2 drivers, these are buck drives so they
require 2 cells for power, they are rated to 500mA out with no heat sink.
They are $14.00 each plus shipping and PP fees.
Groove2 drive
If you would like to have 2 or 4 each silicone insulated
leads soldered to your driver use this button>
Silicone insulated leads
If you would like the current set on your driver use this button and leave me your current set
point in the instructions to merchant section, remember only Adj drivers can be set>
Current set
Contact Boards in 16.8 and 20mm diameters.
16.8mm contact board
16.8mm contact board w/spring
16.8mm contact board w/leads
16.8mm contact board w/spring & leads
20mm size is on the way
................................
require 2 cells for power, they are rated to 500mA out with no heat sink.
They are $14.00 each plus shipping and PP fees.
Groove2 drive
If you would like to have 2 or 4 each silicone insulated
leads soldered to your driver use this button>
Silicone insulated leads
If you would like the current set on your driver use this button and leave me your current set
point in the instructions to merchant section, remember only Adj drivers can be set>
Current set
Contact Boards in 16.8 and 20mm diameters.
16.8mm contact board
16.8mm contact board w/spring
16.8mm contact board w/leads
16.8mm contact board w/spring & leads
20mm size is on the way
................................